New Jersey Air Quality Compliance Inspector
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of the New Jersey Air Pollution Control Act is
to:
A. Promote industrial expansion
B. Reduce energy consumption
C. Protect public health and the environment from air pollution
D. Regulate water discharge
Answer: C
The Act focuses on preventing, controlling, and reducing air pollution to
protect health and welfare.
2. Which agency is responsible for air quality enforcement in New
Jersey?
A. EPA Region 2 only
B. Department of Labor
C. New Jersey Department of Environmental Protection (NJDEP)
D. Board of Public Utilities
Answer: C
NJDEP is the primary state authority for air pollution control and
enforcement.
, 3. An Air Pollution Control Permit is generally required when a
facility:
A. Uses electricity
B. Emits regulated air contaminants
C. Employs more than 10 workers
D. Stores hazardous waste
Answer: B
Permits are required for sources that emit regulated air pollutants.
4. Which pollutant is considered a criteria air pollutant?
A. Mercury
B. Lead
C. Benzene
D. Dioxin
Answer: B
Lead is one of the EPA-designated criteria pollutants.
5. The National Ambient Air Quality Standards (NAAQS) are
established to:
A. Control indoor air quality
B. Regulate fuel prices
C. Protect public health and welfare
D. Control workplace exposure
,Answer: C
NAAQS set allowable outdoor air concentrations for major pollutants.
6. A “stationary source” refers to:
A. A moving vehicle
B. A temporary tent structure
C. A fixed emission point at a facility
D. A portable generator used once
Answer: C
Stationary sources are fixed locations that emit air pollutants.
7. Visible emissions are commonly evaluated using:
A. Sound meters
B. Method 9 opacity readings
C. Gas chromatographs
D. Flow meters
Answer: B
EPA Method 9 is used to determine opacity from visible emissions.
8. Opacity refers to the:
A. Temperature of emissions
B. Color of smoke
C. Degree to which emissions block light
D. Chemical content of exhaust
, Answer: C
Opacity measures how much light is obscured by emissions.
9. Which document outlines operating conditions and emission
limits for a facility?
A. Incident report
B. Air permit
C. Safety data sheet
D. Inspection checklist
Answer: B
Air permits specify allowable emissions and operating requirements.
10. A violation notice is typically issued when:
A. Equipment is brand new
B. Emissions exceed permit limits
C. Weather conditions change
D. Records are filed early
Answer: B
Exceeding permit conditions constitutes a regulatory violation.
11. Which pollutant contributes most directly to smog
formation?
A. Carbon monoxide
B. Sulfur dioxide
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1. The primary purpose of the New Jersey Air Pollution Control Act is
to:
A. Promote industrial expansion
B. Reduce energy consumption
C. Protect public health and the environment from air pollution
D. Regulate water discharge
Answer: C
The Act focuses on preventing, controlling, and reducing air pollution to
protect health and welfare.
2. Which agency is responsible for air quality enforcement in New
Jersey?
A. EPA Region 2 only
B. Department of Labor
C. New Jersey Department of Environmental Protection (NJDEP)
D. Board of Public Utilities
Answer: C
NJDEP is the primary state authority for air pollution control and
enforcement.
, 3. An Air Pollution Control Permit is generally required when a
facility:
A. Uses electricity
B. Emits regulated air contaminants
C. Employs more than 10 workers
D. Stores hazardous waste
Answer: B
Permits are required for sources that emit regulated air pollutants.
4. Which pollutant is considered a criteria air pollutant?
A. Mercury
B. Lead
C. Benzene
D. Dioxin
Answer: B
Lead is one of the EPA-designated criteria pollutants.
5. The National Ambient Air Quality Standards (NAAQS) are
established to:
A. Control indoor air quality
B. Regulate fuel prices
C. Protect public health and welfare
D. Control workplace exposure
,Answer: C
NAAQS set allowable outdoor air concentrations for major pollutants.
6. A “stationary source” refers to:
A. A moving vehicle
B. A temporary tent structure
C. A fixed emission point at a facility
D. A portable generator used once
Answer: C
Stationary sources are fixed locations that emit air pollutants.
7. Visible emissions are commonly evaluated using:
A. Sound meters
B. Method 9 opacity readings
C. Gas chromatographs
D. Flow meters
Answer: B
EPA Method 9 is used to determine opacity from visible emissions.
8. Opacity refers to the:
A. Temperature of emissions
B. Color of smoke
C. Degree to which emissions block light
D. Chemical content of exhaust
, Answer: C
Opacity measures how much light is obscured by emissions.
9. Which document outlines operating conditions and emission
limits for a facility?
A. Incident report
B. Air permit
C. Safety data sheet
D. Inspection checklist
Answer: B
Air permits specify allowable emissions and operating requirements.
10. A violation notice is typically issued when:
A. Equipment is brand new
B. Emissions exceed permit limits
C. Weather conditions change
D. Records are filed early
Answer: B
Exceeding permit conditions constitutes a regulatory violation.
11. Which pollutant contributes most directly to smog
formation?
A. Carbon monoxide
B. Sulfur dioxide
