ICORR COATING INSPECTOR LEVEL 1 ONLINE
EXAM 2026 PRACTICE EXAM SET WITH 100%
CORRECT SOLVED QUESTIONS
◉ Dew point. Answer: The temperature at which condensation
occurs.
◉ Relative humidity. Answer: A measure of the amount of moisture
in the air compared to saturation level.
◉ Galvanic corrosion. Answer: Corrosion that occurs on metal
substrates due to electrochemical reactions.
◉ Thermal Spray Coatings. Answer: Coatings applied using a
thermal spray process, often referenced by specific standards.
◉ Dry Film Thickness (DFT). Answer: The thickness of a dried
coating film, measured with a gauge.
◉ Polymerization. Answer: The process of monomers joining
together to form a polymer.
, ◉ Holiday. Answer: An exposed area of the substrate or previous
coat of a conductive coating material.
◉ Checking. Answer: A fine crack in the surface of a coating that
rarely reaches the substrate.
◉ Inspection documentation. Answer: Records kept by inspectors
for various purposes, including compliance and quality assurance.
◉ Non Conformance Reports. Answer: Reports completed by the
inspector when an item does not meet specification requirements.
◉ Initial steel condition. Answer: The condition of steel before
coating, which affects the final appearance and coating
requirements.
◉ Localized Corrosion. Answer: Corrosion that occurs in a specific
area, leading to potential catastrophic failure.
◉ Blotter test. Answer: A test used to determine the presence of oil
and water in compressed air.
◉ Osmotic blistering. Answer: Blistering that occurs due to
overcoating a surface contaminated with chemical salts.
EXAM 2026 PRACTICE EXAM SET WITH 100%
CORRECT SOLVED QUESTIONS
◉ Dew point. Answer: The temperature at which condensation
occurs.
◉ Relative humidity. Answer: A measure of the amount of moisture
in the air compared to saturation level.
◉ Galvanic corrosion. Answer: Corrosion that occurs on metal
substrates due to electrochemical reactions.
◉ Thermal Spray Coatings. Answer: Coatings applied using a
thermal spray process, often referenced by specific standards.
◉ Dry Film Thickness (DFT). Answer: The thickness of a dried
coating film, measured with a gauge.
◉ Polymerization. Answer: The process of monomers joining
together to form a polymer.
, ◉ Holiday. Answer: An exposed area of the substrate or previous
coat of a conductive coating material.
◉ Checking. Answer: A fine crack in the surface of a coating that
rarely reaches the substrate.
◉ Inspection documentation. Answer: Records kept by inspectors
for various purposes, including compliance and quality assurance.
◉ Non Conformance Reports. Answer: Reports completed by the
inspector when an item does not meet specification requirements.
◉ Initial steel condition. Answer: The condition of steel before
coating, which affects the final appearance and coating
requirements.
◉ Localized Corrosion. Answer: Corrosion that occurs in a specific
area, leading to potential catastrophic failure.
◉ Blotter test. Answer: A test used to determine the presence of oil
and water in compressed air.
◉ Osmotic blistering. Answer: Blistering that occurs due to
overcoating a surface contaminated with chemical salts.
