Champions School Home Inspection Exam Questions and Answers| New Update with 100%
Correct Answers
Which statement is true?
(a) Increasing the insulation makes the attic warmer.
(b) If the attic is cold, then warm, moist air leaking into the attic from the house will condense
more quickly.
(c) If you increase the insulation level in a roof, you should decrease the ventilation.
(d) The insulation and ventilation cannot affect the structure of a roof. ?
Four reasons why written reports are needed. 1.The Standards require it
2.To help the client
3.To control your liability
4.Marketing tool
Two time options for report delivery. 1.On site reports
2.Reports sent after the inspection
Three general types of report formats. 1.Checklist
2.Narrative
3.Combination
Ten common components of the body of the report 1.Scope/contract
2.Descriptions
3.Conditions or evaluations
4.Causes of conditions
5.Implications of conditions
6.Recommended actions
,7.Limitations
8.Life expectancy
9.Priorities
10.Ballpark costs
Three main functions of exterior cladding: 1.Protect the structure from water;
2.Provide reasonable security;
3.Enhance the appearance of the home
What is efflorescence and what causes it: Efflorescence is a whitish powdery salt deposit
that is associated with water moving through masonry. Water dissolves the salts from masonry
or mortar and deposits them on the surface as crystals when evaporating
Stucco is made up of cement, aggregate and water
Stucco is similar to plaster, which is used on the inside of buildings.
Six common problems with caulking, trim and flashings: 1.Missing flashings;
2.Ineffective or incomplete flashings;
3.Loose;
4.Rust;
5.Rot;
6.Caulking missing or ineffective
Three mechanisms by which water may get into wall systems from the building exterior
1.Rain driven by wind;
2.Rain running down the wall (gravity);
3.Water wicking into the wall (capillary action)
,In evaluating exterior trim and flashings, you'll have to use some common sense. Picture water
running down the walls and you should be able to predict whether a given detail is likely to be
successful or not. Remember that areas that catch water or allow it into wall sys-tems can
cause considerable concealed damage.One of the trickiest aspects of inspecting exterior
flashings is that you can't see most of what you'd like to see. In some cases, you can't even tell
whether a flashing is in place. Most of the time you have to settle for looking for evidence of
nonperformance of flashings. In some cases, what seems like an obvious entrance point is
protected by a concealed flashing and really isn't a problem. In other cases, details that look
good are leakage points.The conclusive evidence is water damage around and below the
flashing, visible on the sid-ing, the interior finishes, or the building skeleton. Since there
Guardrails are typically required on porches, decks, or balconies more than 24 or 30 inches
above grade.
A single handrail is adequate for stairs up to 44 inches wide
The openings between railing spindles should not be greater than 4 3/8
Why you shouldn't align a beam with a gutter to check for sag: Gutters slope so they always
look off level
Installing joists with hangers is considered superior to toe-nailing them to beams because:
There is more protection against uplift and twisting with a joist hanger
The proper way to flash a ledgerboard installed over siding: Flashing extends from under the
siding, over the top of the ledgerboard, and down
Deck boards often rot first Where the joists penetrate the wall
, There should be no supply or return registers from heating/cooling ductwork in a garage
because: To prevent fumes from entering the house.
A good concrete garage floor slab is usually at least 3 inches thick and has 5 inches of gravel
beneath it.
Bad grading will always cause wet basements. T/F ? False
Sloped roofs are not waterproof because: They are designed to shed water like a series of
umbrel-las. They are not designed to control standing water.
A minor leak can be more of a problem than a major one because: A minor roof leak may
cause considerable damage before it is noticed
The sides of a roof that will wear faster in climates where ultraviolet light is the main aging
factor are South and west
Anything that restricts the drainage of water is a vulnerable area. Examples are: Wide chim-
neys near the lower edge of the roof; Chimneys in valleys; Skylights; Drains from upper roofs
discharging onto lower roof; Changes in material; Equipment that obstructs drainage; Com-plex
flashing details; Asymmetric valleys; Repaired areas; Changes in slope
The following roofs are most prone to ice dams: A low slope roof with a wide soffit.
The typical life expectancy of an asphalt shingle roof is: An asphalt shingle roof typically lasts
15-25 years
Two good repair methods for slate are: slate hooks and making babies
Correct Answers
Which statement is true?
(a) Increasing the insulation makes the attic warmer.
(b) If the attic is cold, then warm, moist air leaking into the attic from the house will condense
more quickly.
(c) If you increase the insulation level in a roof, you should decrease the ventilation.
(d) The insulation and ventilation cannot affect the structure of a roof. ?
Four reasons why written reports are needed. 1.The Standards require it
2.To help the client
3.To control your liability
4.Marketing tool
Two time options for report delivery. 1.On site reports
2.Reports sent after the inspection
Three general types of report formats. 1.Checklist
2.Narrative
3.Combination
Ten common components of the body of the report 1.Scope/contract
2.Descriptions
3.Conditions or evaluations
4.Causes of conditions
5.Implications of conditions
6.Recommended actions
,7.Limitations
8.Life expectancy
9.Priorities
10.Ballpark costs
Three main functions of exterior cladding: 1.Protect the structure from water;
2.Provide reasonable security;
3.Enhance the appearance of the home
What is efflorescence and what causes it: Efflorescence is a whitish powdery salt deposit
that is associated with water moving through masonry. Water dissolves the salts from masonry
or mortar and deposits them on the surface as crystals when evaporating
Stucco is made up of cement, aggregate and water
Stucco is similar to plaster, which is used on the inside of buildings.
Six common problems with caulking, trim and flashings: 1.Missing flashings;
2.Ineffective or incomplete flashings;
3.Loose;
4.Rust;
5.Rot;
6.Caulking missing or ineffective
Three mechanisms by which water may get into wall systems from the building exterior
1.Rain driven by wind;
2.Rain running down the wall (gravity);
3.Water wicking into the wall (capillary action)
,In evaluating exterior trim and flashings, you'll have to use some common sense. Picture water
running down the walls and you should be able to predict whether a given detail is likely to be
successful or not. Remember that areas that catch water or allow it into wall sys-tems can
cause considerable concealed damage.One of the trickiest aspects of inspecting exterior
flashings is that you can't see most of what you'd like to see. In some cases, you can't even tell
whether a flashing is in place. Most of the time you have to settle for looking for evidence of
nonperformance of flashings. In some cases, what seems like an obvious entrance point is
protected by a concealed flashing and really isn't a problem. In other cases, details that look
good are leakage points.The conclusive evidence is water damage around and below the
flashing, visible on the sid-ing, the interior finishes, or the building skeleton. Since there
Guardrails are typically required on porches, decks, or balconies more than 24 or 30 inches
above grade.
A single handrail is adequate for stairs up to 44 inches wide
The openings between railing spindles should not be greater than 4 3/8
Why you shouldn't align a beam with a gutter to check for sag: Gutters slope so they always
look off level
Installing joists with hangers is considered superior to toe-nailing them to beams because:
There is more protection against uplift and twisting with a joist hanger
The proper way to flash a ledgerboard installed over siding: Flashing extends from under the
siding, over the top of the ledgerboard, and down
Deck boards often rot first Where the joists penetrate the wall
, There should be no supply or return registers from heating/cooling ductwork in a garage
because: To prevent fumes from entering the house.
A good concrete garage floor slab is usually at least 3 inches thick and has 5 inches of gravel
beneath it.
Bad grading will always cause wet basements. T/F ? False
Sloped roofs are not waterproof because: They are designed to shed water like a series of
umbrel-las. They are not designed to control standing water.
A minor leak can be more of a problem than a major one because: A minor roof leak may
cause considerable damage before it is noticed
The sides of a roof that will wear faster in climates where ultraviolet light is the main aging
factor are South and west
Anything that restricts the drainage of water is a vulnerable area. Examples are: Wide chim-
neys near the lower edge of the roof; Chimneys in valleys; Skylights; Drains from upper roofs
discharging onto lower roof; Changes in material; Equipment that obstructs drainage; Com-plex
flashing details; Asymmetric valleys; Repaired areas; Changes in slope
The following roofs are most prone to ice dams: A low slope roof with a wide soffit.
The typical life expectancy of an asphalt shingle roof is: An asphalt shingle roof typically lasts
15-25 years
Two good repair methods for slate are: slate hooks and making babies
