1|Page
TEEX Hazmat Technician Exam, Most Recent Exam
2026 Actual Complete Real Exam Questions And
Correct Answers ||Verified Exam!!! (Verified Answers)
Already Graded A+ / Newest Exam!!!
During an incident critique, responders identified several
shortcomings in their SOPS. This information should: -
Answers-Be used to improve their response to the next
hazardous materials incident
Identify all the people who should be present at an
incident debriefing - Answers-Hazmat Response Team,
IMS Officers, Incident Commander, Information Officers
You have just written the critique record for an incident
where several responders were badly burned. The next
step is to: - Answers-Circulate the report to allow everyone
in the response system to share the lessons learned.
Although normally very effective, two-way radio
communication can fail. Identify THREE causes of
problems with two-way radio communications - Answers-
Faulty Batteries, Interference, and enclosed spaces.
,2|Page
The primary hazard you'll encounter when removing
product from an MC-312/DOT-412 cargo tank is: -
Answers-Corrosivity
If you respond to an incident involving an MC-306/DOT-
406 carrying ethanol-blended gasoline, you'll need to
suppress the fire using: - Answers-Class B foam-alcohol
resistant concentrate
An MC-306/DOT-406 cargo tank is found to be leaking
gasoline from a number of small, regular punctures. The
easiest method of stopping the leaks would be: - Answers-
plugging with small pine plugs
One important safety consideration for choosing power or
hand tools for product removal/transfer operations is
whether the tool: - Answers-is non-sparking
To fix a leaking pressure relief valve gasket on a chlorine
rail tank car, you could tighten the stud nuts OR: -
Answers-Apply the hood assembly
,3|Page
A valve/plug assembly should be used to: - Answers-
Replace a missing plug
Proper care of tools and equipment used to control
hazardous materials releases includes all of the following
EXCEPT: - Answers-Thoroughly washing all parts with a
chlorine bleach solution
When grounding a damaged tank, place the clamp: -
Answers-Low enough on the grounding rod so that foam, if
used, will build up around the clamp
The object of bonding is to: - Answers-Keep objects at the
same electrical potential, decreasing or eliminating any
chance of a static spark
When setting up a mass decon corridor, it should be
located: - Answers-Upwind from the incident site
During an extensive decon operation, the step that would
be performed just PRIOR to "SCBA Removal" involving
Level B protective clothing is: - Answers-Perform technical
decontamination
, 4|Page
When preparing to decontaminate, pay special attention to
contaminants that can affect: - Answers-PPE and
monitoring equipment
Identify THREE emergency situations that can endanger
the wearer of a CPC suit - Answers-Loss of suit integrity,
disruption in radio communications, and loss of air supply
Match each ICS Position with its function - Answers-
Decontamination Unit Leader= Determine the level of
decontamination required
Entry Unit Leader= Supervises the entry team and makes
recommendations about control activities in the hot zone
Assistant Safety Officer Hazmat= Responsible for the
safety of all personnel operating in the hot zone
Information/Research= Provides information on the
hazards present and chemical compatibility of protective
clothing and equipment
Identify the item in the confined space shown here that
indicates the space has been isolated - Answers-B- the
Tags
TEEX Hazmat Technician Exam, Most Recent Exam
2026 Actual Complete Real Exam Questions And
Correct Answers ||Verified Exam!!! (Verified Answers)
Already Graded A+ / Newest Exam!!!
During an incident critique, responders identified several
shortcomings in their SOPS. This information should: -
Answers-Be used to improve their response to the next
hazardous materials incident
Identify all the people who should be present at an
incident debriefing - Answers-Hazmat Response Team,
IMS Officers, Incident Commander, Information Officers
You have just written the critique record for an incident
where several responders were badly burned. The next
step is to: - Answers-Circulate the report to allow everyone
in the response system to share the lessons learned.
Although normally very effective, two-way radio
communication can fail. Identify THREE causes of
problems with two-way radio communications - Answers-
Faulty Batteries, Interference, and enclosed spaces.
,2|Page
The primary hazard you'll encounter when removing
product from an MC-312/DOT-412 cargo tank is: -
Answers-Corrosivity
If you respond to an incident involving an MC-306/DOT-
406 carrying ethanol-blended gasoline, you'll need to
suppress the fire using: - Answers-Class B foam-alcohol
resistant concentrate
An MC-306/DOT-406 cargo tank is found to be leaking
gasoline from a number of small, regular punctures. The
easiest method of stopping the leaks would be: - Answers-
plugging with small pine plugs
One important safety consideration for choosing power or
hand tools for product removal/transfer operations is
whether the tool: - Answers-is non-sparking
To fix a leaking pressure relief valve gasket on a chlorine
rail tank car, you could tighten the stud nuts OR: -
Answers-Apply the hood assembly
,3|Page
A valve/plug assembly should be used to: - Answers-
Replace a missing plug
Proper care of tools and equipment used to control
hazardous materials releases includes all of the following
EXCEPT: - Answers-Thoroughly washing all parts with a
chlorine bleach solution
When grounding a damaged tank, place the clamp: -
Answers-Low enough on the grounding rod so that foam, if
used, will build up around the clamp
The object of bonding is to: - Answers-Keep objects at the
same electrical potential, decreasing or eliminating any
chance of a static spark
When setting up a mass decon corridor, it should be
located: - Answers-Upwind from the incident site
During an extensive decon operation, the step that would
be performed just PRIOR to "SCBA Removal" involving
Level B protective clothing is: - Answers-Perform technical
decontamination
, 4|Page
When preparing to decontaminate, pay special attention to
contaminants that can affect: - Answers-PPE and
monitoring equipment
Identify THREE emergency situations that can endanger
the wearer of a CPC suit - Answers-Loss of suit integrity,
disruption in radio communications, and loss of air supply
Match each ICS Position with its function - Answers-
Decontamination Unit Leader= Determine the level of
decontamination required
Entry Unit Leader= Supervises the entry team and makes
recommendations about control activities in the hot zone
Assistant Safety Officer Hazmat= Responsible for the
safety of all personnel operating in the hot zone
Information/Research= Provides information on the
hazards present and chemical compatibility of protective
clothing and equipment
Identify the item in the confined space shown here that
indicates the space has been isolated - Answers-B- the
Tags
