Georgia Conditioned Air Contractor
Class II Examination Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
Pdf
1. What is the licensing body for Conditioned Air Contractors in Georgia?
A) Georgia Department of Labor
B) Georgia Construction Industry Licensing Board – Division of
Conditioned Air Contractors
C) Georgia HVAC Association
D) Georgia Department of Public Safety
Rationale: The Georgia Construction Industry Licensing Board –
Division of Conditioned Air Contractors oversees licensing and
regulation.
2. A Class II conditioned air contractor license in Georgia is:
A) Restricted to small residential systems
B) Unrestricted for system size and type
C) Only valid for repair work
D) Only valid for ductwork
Rationale: Class II licenses are unrestricted and allow contracting on
all conditioned air systems.
3. How many questions are on the Georgia Conditioned Air Contractor
exam?
A) 50
B) 80
C) 100
, D) 120
Rationale: The Class II exam consists of 100 scored questions.
4. To pass the exam, the minimum required score is:
A) 60%
B) 65%
C) 70%
D) 75%
Rationale: A score of 70% or higher is required to pass.
5. The Georgia Class II experience requirement includes how many years
of documented HVAC work?
A) 4 years
B) 5 years
C) 6 years
D) 3 years
Rationale: Class II applicants must document five years of relevant
experience.
6. Which certification must be submitted with the license application?
A) OSHA 10
B) EPA Section 609
C) EPA Section 608 Type II or higher
D) NATE Universal
Rationale: EPA 608 certification (Type II or higher) is required for
handling refrigerants.
7. The Georgia HVAC exam is:
A) Closed-book
B) Open-book
C) Oral only
D) Hands-on only
Rationale: The exam is open-book with specific reference materials
allowed.
8. Which code book is permitted as an approved reference?
A) 2021 NEC
B) 2017 National Electrical Code (NEC)
C) 2020 NEC
D) 2023 NEC
, Rationale: The 2017 NEC is listed on the Georgia reference list for
this exam.
9. The primary unit of measure for heating and cooling capacity is:
A) Joule
B) Watt
C) BTU (British Thermal Unit)
D) Calorie
Rationale: BTU is the standard unit of heat energy used in HVAC
systems.
10. When selecting equipment based on calculated load, the
capacity chosen must be:
A) Exactly equal to load
B) Slightly less than load
C) Slightly more than load
D) Any size is acceptable
Rationale: Equipment must meet or exceed calculated
heating/cooling loads.
11. Exposed wiring during installation primarily increases the risk of:
A) System inefficiency
B) Electrical shock and fire
C) Reduced airflow
D) Refrigerant leaks
Rationale: Exposed wiring creates a shock and fire hazard.
12. Before using PPE, a technician should:
A) Wear optional gear only
B) Rely on manufacturer notes
C) Conduct a hazard assessment
D) Avoid PPE if experienced
Rationale: Assessing hazards ensures appropriate PPE is selected.
13. A fall hazard on site should be:
A) Documented and ignored
B) Noted for later
C) Secured immediately
D) Reported after work
Rationale: Immediate action prevents injury.
Class II Examination Questions And
Correct Answers (Verified Answers) Plus
Rationale 2026 Q&A| Instant Download
1. What is the licensing body for Conditioned Air Contractors in Georgia?
A) Georgia Department of Labor
B) Georgia Construction Industry Licensing Board – Division of
Conditioned Air Contractors
C) Georgia HVAC Association
D) Georgia Department of Public Safety
Rationale: The Georgia Construction Industry Licensing Board –
Division of Conditioned Air Contractors oversees licensing and
regulation.
2. A Class II conditioned air contractor license in Georgia is:
A) Restricted to small residential systems
B) Unrestricted for system size and type
C) Only valid for repair work
D) Only valid for ductwork
Rationale: Class II licenses are unrestricted and allow contracting on
all conditioned air systems.
3. How many questions are on the Georgia Conditioned Air Contractor
exam?
A) 50
B) 80
C) 100
, D) 120
Rationale: The Class II exam consists of 100 scored questions.
4. To pass the exam, the minimum required score is:
A) 60%
B) 65%
C) 70%
D) 75%
Rationale: A score of 70% or higher is required to pass.
5. The Georgia Class II experience requirement includes how many years
of documented HVAC work?
A) 4 years
B) 5 years
C) 6 years
D) 3 years
Rationale: Class II applicants must document five years of relevant
experience.
6. Which certification must be submitted with the license application?
A) OSHA 10
B) EPA Section 609
C) EPA Section 608 Type II or higher
D) NATE Universal
Rationale: EPA 608 certification (Type II or higher) is required for
handling refrigerants.
7. The Georgia HVAC exam is:
A) Closed-book
B) Open-book
C) Oral only
D) Hands-on only
Rationale: The exam is open-book with specific reference materials
allowed.
8. Which code book is permitted as an approved reference?
A) 2021 NEC
B) 2017 National Electrical Code (NEC)
C) 2020 NEC
D) 2023 NEC
, Rationale: The 2017 NEC is listed on the Georgia reference list for
this exam.
9. The primary unit of measure for heating and cooling capacity is:
A) Joule
B) Watt
C) BTU (British Thermal Unit)
D) Calorie
Rationale: BTU is the standard unit of heat energy used in HVAC
systems.
10. When selecting equipment based on calculated load, the
capacity chosen must be:
A) Exactly equal to load
B) Slightly less than load
C) Slightly more than load
D) Any size is acceptable
Rationale: Equipment must meet or exceed calculated
heating/cooling loads.
11. Exposed wiring during installation primarily increases the risk of:
A) System inefficiency
B) Electrical shock and fire
C) Reduced airflow
D) Refrigerant leaks
Rationale: Exposed wiring creates a shock and fire hazard.
12. Before using PPE, a technician should:
A) Wear optional gear only
B) Rely on manufacturer notes
C) Conduct a hazard assessment
D) Avoid PPE if experienced
Rationale: Assessing hazards ensures appropriate PPE is selected.
13. A fall hazard on site should be:
A) Documented and ignored
B) Noted for later
C) Secured immediately
D) Reported after work
Rationale: Immediate action prevents injury.
