MO-VALLEY TEST 2-3 STUDY GUIDE
2025/2026 COMPLETE QUESTIONS
WITH VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. When converting from a whole number to a prefixed number, ? the whole
number by the value of the ? .
a.add / prefix
b.divide / prefix
c.multiply / prefix
d.multiply / suffix - ANSWER ✔ b.divide / prefix
2. *to multiply two numbers written as powers of 10, multiply the left
components and ? the exponents.
a. add
b. divide
c. multiply
d. subtract - ANSWER ✔ a. add
3. *Angle A measures 30 degrees. If angles A and B are complementary
angles, the measurement of angle B is ?.
a. 30
, b. 60
c. 150
d. 330 - ANSWER ✔ b. 60
4. *Thick lines with two short dashes between long dashes with arrows at each
end indicate viewing direction and visually carve an internal section out of a
drawing are called ?.
a. cutting plane lines
b. horizontal lines
c. object lines
d. section lines - ANSWER ✔ a. cutting plane lines
5. *A triangle with three congruent sides is a(n) ?.
a. equilateral
b. isosceles
c. right
d. scalene - ANSWER ✔ a. equilateral
6. *Official survey lines and points are usually established by ?.
a. government agencies
b. land owners
c. surveying companies
d. utility companies - ANSWER ✔ a. government agencies
7. *A(n) ? drawing will show the concrete pad for a substation transformer.
, a. architectural
b. contractor specifications
c. plan and profile
d. structural - ANSWER ✔ a. architectural
8. *In order to turn horizontal and vertical angles, a ? would be used.
a. level
b. theodite
c. transit
d. tribrach - ANSWER ✔ c. transit
9. *The sum of all three angles of a right triangle always equals ?.
a. 90
b. 180
c. 270
d. 360 - ANSWER ✔ b. 180
10.No part of a drawing is more important than the ? .
a.dimensions
b.notes
c.materials list
d.top view - ANSWER ✔ a.dimensions
11.A code number or ? can help to quickly identify parts on the materials list.
2025/2026 COMPLETE QUESTIONS
WITH VERIFIED CORRECT ANSWERS ||
100% GUARANTEED PASS
<NEWEST VERSION>
1. When converting from a whole number to a prefixed number, ? the whole
number by the value of the ? .
a.add / prefix
b.divide / prefix
c.multiply / prefix
d.multiply / suffix - ANSWER ✔ b.divide / prefix
2. *to multiply two numbers written as powers of 10, multiply the left
components and ? the exponents.
a. add
b. divide
c. multiply
d. subtract - ANSWER ✔ a. add
3. *Angle A measures 30 degrees. If angles A and B are complementary
angles, the measurement of angle B is ?.
a. 30
, b. 60
c. 150
d. 330 - ANSWER ✔ b. 60
4. *Thick lines with two short dashes between long dashes with arrows at each
end indicate viewing direction and visually carve an internal section out of a
drawing are called ?.
a. cutting plane lines
b. horizontal lines
c. object lines
d. section lines - ANSWER ✔ a. cutting plane lines
5. *A triangle with three congruent sides is a(n) ?.
a. equilateral
b. isosceles
c. right
d. scalene - ANSWER ✔ a. equilateral
6. *Official survey lines and points are usually established by ?.
a. government agencies
b. land owners
c. surveying companies
d. utility companies - ANSWER ✔ a. government agencies
7. *A(n) ? drawing will show the concrete pad for a substation transformer.
, a. architectural
b. contractor specifications
c. plan and profile
d. structural - ANSWER ✔ a. architectural
8. *In order to turn horizontal and vertical angles, a ? would be used.
a. level
b. theodite
c. transit
d. tribrach - ANSWER ✔ c. transit
9. *The sum of all three angles of a right triangle always equals ?.
a. 90
b. 180
c. 270
d. 360 - ANSWER ✔ b. 180
10.No part of a drawing is more important than the ? .
a.dimensions
b.notes
c.materials list
d.top view - ANSWER ✔ a.dimensions
11.A code number or ? can help to quickly identify parts on the materials list.
