API 1169 (2) Exam Questions with Correct Answers| Latest Update Guaranteed Success
Except for eye splices in the ends of wires and for endless rope slings, each wire rope used in
hoisting or lowering, or in pulling loads, shall consist of which of the following? One
continuous piece without knot or splice
Which of the following is a requirement of basic inspector knowledge when dealing with
material preservation and handling? Quarantine, tagging, and identification.
Part of quality management focused on fulfilling quality requirements. Quality Control
What should be used on all temporary hosing during a hydrostatic test? Tie downs
What is the minimum of padding for pipeline in rocky terrain? 12 inches
If you lock out/tag out an intake line in a compressor station, what energy are you preventing
from being released? Pneumatic
Which of the following statements is most true regarding protective screens for welding
activity? It is permitted to use semitransparent materials for protective screens
Who should a pipeline inspector report deficiencies to? Chief inspector, project manager, or
designated owner/operator personnel
During pressure testing, what document would specify the preferred method of detecting leaks
or failures? The site specific test procedure
Part of quality management focused on providing confidence that quality requirements will be
fulfilled. Quality assurance
, In regards to facility marking; who is responsible for matching markings to the existing and
expected surface conditions? Locator
How long is a TWIC valid for in terms of years? 5
Which of the following would be the appropriate response to encountering an endangered
species on the ROW during excavation activity? Stop the job and contact the
owner/operator
A uniform color code and set of marking symbols is adopted _ . Nationwide
Fume control is more effective when airflow is directed: Across the face of the welder
Area where the ground disturbance occurs within 50 feet of the centerline of the existing
facility, or within the facility's ROW or other easement, whichever is greater. Encroachment
Area
The standard for safety in cutting, welding, and plied processes refers to which of the following
documents? ANZI Z49.1
Which of the following should be marked "white" on a pipeline project? Proposed
excavation
What is the purpose or intention of installing trench breakers within a pipeline construction
excavation? Slow the flow of subsurface water along the trench
Small voids or pores, usually gas filled, in the weld material. Porosity
Which of the following is not a consideration for HDD bores? Course width
Except for eye splices in the ends of wires and for endless rope slings, each wire rope used in
hoisting or lowering, or in pulling loads, shall consist of which of the following? One
continuous piece without knot or splice
Which of the following is a requirement of basic inspector knowledge when dealing with
material preservation and handling? Quarantine, tagging, and identification.
Part of quality management focused on fulfilling quality requirements. Quality Control
What should be used on all temporary hosing during a hydrostatic test? Tie downs
What is the minimum of padding for pipeline in rocky terrain? 12 inches
If you lock out/tag out an intake line in a compressor station, what energy are you preventing
from being released? Pneumatic
Which of the following statements is most true regarding protective screens for welding
activity? It is permitted to use semitransparent materials for protective screens
Who should a pipeline inspector report deficiencies to? Chief inspector, project manager, or
designated owner/operator personnel
During pressure testing, what document would specify the preferred method of detecting leaks
or failures? The site specific test procedure
Part of quality management focused on providing confidence that quality requirements will be
fulfilled. Quality assurance
, In regards to facility marking; who is responsible for matching markings to the existing and
expected surface conditions? Locator
How long is a TWIC valid for in terms of years? 5
Which of the following would be the appropriate response to encountering an endangered
species on the ROW during excavation activity? Stop the job and contact the
owner/operator
A uniform color code and set of marking symbols is adopted _ . Nationwide
Fume control is more effective when airflow is directed: Across the face of the welder
Area where the ground disturbance occurs within 50 feet of the centerline of the existing
facility, or within the facility's ROW or other easement, whichever is greater. Encroachment
Area
The standard for safety in cutting, welding, and plied processes refers to which of the following
documents? ANZI Z49.1
Which of the following should be marked "white" on a pipeline project? Proposed
excavation
What is the purpose or intention of installing trench breakers within a pipeline construction
excavation? Slow the flow of subsurface water along the trench
Small voids or pores, usually gas filled, in the weld material. Porosity
Which of the following is not a consideration for HDD bores? Course width
