AMMO CDC SET B TEST
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
What are the classifications of pyrotechnics? ANSWER -Illuminants, signals, combinations
of signals and illuminants, and simulators.
What type of explosive is loaded in the projectile of the 105 MM high explosive round?
ANSWER -Comp B.
When are nuclear weapons moved by convoy? ANSWER -Every time weapons are moved.
What piece of equipment must be used with the MHU-110/M to prevent the trailer from
becoming unstable while loading or unloading? ANSWER -Stabilizer jack.
What substance is the filler for the M30 practice grenade? ANSWER -Black powder.
What is worn if there is a potential for injury from falling objects? ANSWER -Protective
helmets.
What statement is not a benefit of off-axis delivery of the JDAM? ANSWER -Provides
increased weapons range.
Which statement about pintle hooks and their use in operations with nuclear weapons is not
correct? ANSWER -Original equipment pintle hook assemblies are not authorized.
When are unfuzed loaded weapons transported on the tines of a forklift? ANSWER -When
the weapons body is strong enough to prevent damage and is long enough to be transported
safely.
An electric saw's blade must be operating at what speed before it contacts the material being
cut? ANSWER -Full.
,How far in front of an M18A1 mine do we consider inside the danger zone? ANSWER -250
meters.
Which action is not an authorized method for securing loose chain assembly ends?
ANSWER -Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? ANSWER -Release the adjusting mechanism; pull
the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is
difficult to shift? ANSWER -Drive forward or backward a short distance, stop the tractor,
and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment
(CMBRE)? ANSWER -AN/GYQ-79
When and where is the MK124 Mod 0 signal used? ANSWER -Day or night, land or sea
use.
After final tighening of the cable-type load binder, verify... ANSWER -Threads (more than
one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? ANSWER -General maintenance.
After HCU-6/E pallets are positioned on a rollerized trailer, what can you use to secure the
pallets to the trailer? ANSWER -MB-1 chain assemblies or tie-down straps.
The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test
set? ANSWER -AN/GYQ-79
In an electrically-timed fuze, what component replaces the arming vanes used in
mechanically timed fuzes? ANSWER -Electric charging assembly.
, What are the basic components of an explosive train? ANSWER -Detonator, booster, and a
bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? ANSWER -
Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an
aircraft/K-loader? ANSWER -An adjustable ramp.
What mortar has a short range and a small explosive charge? ANSWER -Light
What is the inspection cycle for the UALS replenisher? ANSWER -Every 30 days when in
use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed
system? ANSWER -Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last?
ANSWER -Gantry.
Which component of the A/E32K-3 MAC can be used as a forklift adapter to raise the
gantry to full height? ANSWER -Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target penetration?
ANSWER -Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? ANSWER -The tail fuze well.
What components, minimum, make up a propulsion system? ANSWER -Rocket motor and
rocket motor igniter.
In what length is fire wire issued? ANSWER -500 feet.
Externally, the M129 leaflet bomb is similar to the... ANSWER -M117, 750-pound bomb.
WITH COMPLETE SOLUTIONS
GRADED A+
QUESTIONS AND ANSWERS
What are the classifications of pyrotechnics? ANSWER -Illuminants, signals, combinations
of signals and illuminants, and simulators.
What type of explosive is loaded in the projectile of the 105 MM high explosive round?
ANSWER -Comp B.
When are nuclear weapons moved by convoy? ANSWER -Every time weapons are moved.
What piece of equipment must be used with the MHU-110/M to prevent the trailer from
becoming unstable while loading or unloading? ANSWER -Stabilizer jack.
What substance is the filler for the M30 practice grenade? ANSWER -Black powder.
What is worn if there is a potential for injury from falling objects? ANSWER -Protective
helmets.
What statement is not a benefit of off-axis delivery of the JDAM? ANSWER -Provides
increased weapons range.
Which statement about pintle hooks and their use in operations with nuclear weapons is not
correct? ANSWER -Original equipment pintle hook assemblies are not authorized.
When are unfuzed loaded weapons transported on the tines of a forklift? ANSWER -When
the weapons body is strong enough to prevent damage and is long enough to be transported
safely.
An electric saw's blade must be operating at what speed before it contacts the material being
cut? ANSWER -Full.
,How far in front of an M18A1 mine do we consider inside the danger zone? ANSWER -250
meters.
Which action is not an authorized method for securing loose chain assembly ends?
ANSWER -Wrap the loose ends around the tie-down device; tape to the device.
How do you extend the CGU-1/B strap? ANSWER -Release the adjusting mechanism; pull
the strap.
What should you do if the differential shift lever of the MB-4 aircraft towing tractor is
difficult to shift? ANSWER -Drive forward or backward a short distance, stop the tractor,
and attempt to shift the lever.
Which test set is called the common munitions built-in test/reprogramming equipment
(CMBRE)? ANSWER -AN/GYQ-79
When and where is the MK124 Mod 0 signal used? ANSWER -Day or night, land or sea
use.
After final tighening of the cable-type load binder, verify... ANSWER -Threads (more than
one) are exposed inside the turnbuckle.
What is the MC-7 air compressor designed for? ANSWER -General maintenance.
After HCU-6/E pallets are positioned on a rollerized trailer, what can you use to secure the
pallets to the trailer? ANSWER -MB-1 chain assemblies or tie-down straps.
The ADU-891, Adapter Group Computer Test Set, is used in conjunction with what test
set? ANSWER -AN/GYQ-79
In an electrically-timed fuze, what component replaces the arming vanes used in
mechanically timed fuzes? ANSWER -Electric charging assembly.
, What are the basic components of an explosive train? ANSWER -Detonator, booster, and a
bursting charge.
Which signals are transmitted and received by the AIM-9M target detector? ANSWER -
Pulsed infrared (IR) energy.
What ensures the HCU-6/E pallets transfer smoothly from a rollerized trailer to an
aircraft/K-loader? ANSWER -An adjustable ramp.
What mortar has a short range and a small explosive charge? ANSWER -Light
What is the inspection cycle for the UALS replenisher? ANSWER -Every 30 days when in
use and annually when in storage.
Which component of the conveyor assembly transfers round into the aircraft gun feed
system? ANSWER -Universal aircraft interface unit.
Which component of the munitions assembly conveyor (MAC) is dissambled last?
ANSWER -Gantry.
Which component of the A/E32K-3 MAC can be used as a forklift adapter to raise the
gantry to full height? ANSWER -Interface control board (ICB).
Which component allows the 30 MM armor-piercing round to achieve target penetration?
ANSWER -Depleted uranium penetrator.
In a bomb body, where is M905 fuze installed? ANSWER -The tail fuze well.
What components, minimum, make up a propulsion system? ANSWER -Rocket motor and
rocket motor igniter.
In what length is fire wire issued? ANSWER -500 feet.
Externally, the M129 leaflet bomb is similar to the... ANSWER -M117, 750-pound bomb.
