NCCCO Rigger Level II Certification
Exam With Actual Questions & Verified
Answers, Plus Explained
Rationales/Expert Verified For
Guaranteed 100% Pass 2026/Latest
Update/Instant Download Pdf
1. Which of the following is the primary purpose of a pre-lift
meeting?
A) To schedule the next lift
B) To review lift plan and safety considerations
C) To train new employees
D) To check crane lubrication
B) To review lift plan and safety considerations
Rationale: Pre-lift meetings ensure all personnel understand the
lift plan, potential hazards, and safety procedures.
2. When calculating sling angles, which factor is critical to ensure the
sling capacity is not exceeded?
A) Sling color
B) Sling angle relative to the load
C) Temperature of the environment
D) Length of the sling
B) Sling angle relative to the load
Rationale: The load on a sling increases as the angle decreases;
angles affect tension calculations.
,3. Which of the following types of rigging hardware is best suited for
a vertical lift?
A) Shackle
B) Spreader beam
C) Eye bolt
D) Snatch block
C) Eye bolt
Rationale: Eye bolts provide a secure attachment point for
vertical lifts and are rated for straight vertical loading.
4. What is the maximum allowable side loading on a shackle?
A) 25% of rated load
B) 50% of rated load
C) 75% of rated load
D) 100% of rated load
B) 50% of rated load
Rationale: Side loading reduces shackle capacity; manufacturers
typically limit it to 50% of the rated load.
5. When inspecting a synthetic sling, which condition requires
immediate removal from service?
A) Slight fraying on the edge
B) Minor discoloration
C) Snags or cuts that penetrate load-bearing fibers
D) Dirt accumulation
C) Snags or cuts that penetrate load-bearing fibers
Rationale: Damage that compromises load-bearing fibers can
cause sling failure under load.
6. What is the primary function of a tag line?
A) To measure the load weight
B) To control load rotation and swing
, C) To lift the load
D) To attach the load to the crane hook
B) To control load rotation and swing
Rationale: Tag lines help operators maintain control of the load
and prevent uncontrolled movement.
7. Which factor should be considered when selecting a rigging
configuration for a load with multiple lifting points?
A) Color of the load
B) Load weight and center of gravity
C) Weather conditions only
D) Operator preference
B) Load weight and center of gravity
Rationale: Proper rigging ensures balanced lifting and prevents
tipping or swinging.
8. What is the minimum required clearance between a suspended
load and personnel?
A) 3 feet
B) 10 feet
C) No minimum, depends on the load
D) OSHA requires personnel to stay clear entirely
D) OSHA requires personnel to stay clear entirely
Rationale: OSHA mandates personnel must not be under
suspended loads to avoid injury in case of failure.
9. Which of the following is considered a critical lift?
A) Lifting a small toolbox
B) Lifting a load exceeding 75% of crane capacity over personnel
C) Lifting empty pallets
D) Routine material handling under 10 feet
B) Lifting a load exceeding 75% of crane capacity over personnel
, Rationale: Critical lifts involve high risk due to weight, height, or
potential impact; they require additional planning.
10. How often must rigging hardware be inspected?
A) Annually
B) Monthly
C) Before each use
D) Only after a failure
C) Before each use
Rationale: Daily inspections ensure that any defects are
identified before the rigging is used, preventing accidents.
11. Which type of hitch is most suitable for lifting a load with a
sharp edge?
A) Choker hitch with padding
B) Vertical hitch without padding
C) Basket hitch without padding
D) Endless sling hitch
A) Choker hitch with padding
Rationale: Padding protects the sling from abrasion when in
contact with sharp edges, maintaining strength.
12. What is the purpose of a spreader beam in rigging
operations?
A) To reduce load weight
B) To distribute load evenly and prevent sling damage
C) To guide crane rotation
D) To measure load weight
B) To distribute load evenly and prevent sling damage
Rationale: Spreader beams prevent slings from being overloaded
by distributing the load across multiple points.
Exam With Actual Questions & Verified
Answers, Plus Explained
Rationales/Expert Verified For
Guaranteed 100% Pass 2026/Latest
Update/Instant Download Pdf
1. Which of the following is the primary purpose of a pre-lift
meeting?
A) To schedule the next lift
B) To review lift plan and safety considerations
C) To train new employees
D) To check crane lubrication
B) To review lift plan and safety considerations
Rationale: Pre-lift meetings ensure all personnel understand the
lift plan, potential hazards, and safety procedures.
2. When calculating sling angles, which factor is critical to ensure the
sling capacity is not exceeded?
A) Sling color
B) Sling angle relative to the load
C) Temperature of the environment
D) Length of the sling
B) Sling angle relative to the load
Rationale: The load on a sling increases as the angle decreases;
angles affect tension calculations.
,3. Which of the following types of rigging hardware is best suited for
a vertical lift?
A) Shackle
B) Spreader beam
C) Eye bolt
D) Snatch block
C) Eye bolt
Rationale: Eye bolts provide a secure attachment point for
vertical lifts and are rated for straight vertical loading.
4. What is the maximum allowable side loading on a shackle?
A) 25% of rated load
B) 50% of rated load
C) 75% of rated load
D) 100% of rated load
B) 50% of rated load
Rationale: Side loading reduces shackle capacity; manufacturers
typically limit it to 50% of the rated load.
5. When inspecting a synthetic sling, which condition requires
immediate removal from service?
A) Slight fraying on the edge
B) Minor discoloration
C) Snags or cuts that penetrate load-bearing fibers
D) Dirt accumulation
C) Snags or cuts that penetrate load-bearing fibers
Rationale: Damage that compromises load-bearing fibers can
cause sling failure under load.
6. What is the primary function of a tag line?
A) To measure the load weight
B) To control load rotation and swing
, C) To lift the load
D) To attach the load to the crane hook
B) To control load rotation and swing
Rationale: Tag lines help operators maintain control of the load
and prevent uncontrolled movement.
7. Which factor should be considered when selecting a rigging
configuration for a load with multiple lifting points?
A) Color of the load
B) Load weight and center of gravity
C) Weather conditions only
D) Operator preference
B) Load weight and center of gravity
Rationale: Proper rigging ensures balanced lifting and prevents
tipping or swinging.
8. What is the minimum required clearance between a suspended
load and personnel?
A) 3 feet
B) 10 feet
C) No minimum, depends on the load
D) OSHA requires personnel to stay clear entirely
D) OSHA requires personnel to stay clear entirely
Rationale: OSHA mandates personnel must not be under
suspended loads to avoid injury in case of failure.
9. Which of the following is considered a critical lift?
A) Lifting a small toolbox
B) Lifting a load exceeding 75% of crane capacity over personnel
C) Lifting empty pallets
D) Routine material handling under 10 feet
B) Lifting a load exceeding 75% of crane capacity over personnel
, Rationale: Critical lifts involve high risk due to weight, height, or
potential impact; they require additional planning.
10. How often must rigging hardware be inspected?
A) Annually
B) Monthly
C) Before each use
D) Only after a failure
C) Before each use
Rationale: Daily inspections ensure that any defects are
identified before the rigging is used, preventing accidents.
11. Which type of hitch is most suitable for lifting a load with a
sharp edge?
A) Choker hitch with padding
B) Vertical hitch without padding
C) Basket hitch without padding
D) Endless sling hitch
A) Choker hitch with padding
Rationale: Padding protects the sling from abrasion when in
contact with sharp edges, maintaining strength.
12. What is the purpose of a spreader beam in rigging
operations?
A) To reduce load weight
B) To distribute load evenly and prevent sling damage
C) To guide crane rotation
D) To measure load weight
B) To distribute load evenly and prevent sling damage
Rationale: Spreader beams prevent slings from being overloaded
by distributing the load across multiple points.
