INDUSTRIAL MAINTENANCE COMPREHENSIVE EXAM
UPDATED QUESTIONS AND SOLUTIONS RATED A+
✔✔What are the benefits of regularly inspecting equipment? - ✔✔
✔✔Threaded fasteners are subjected to ________ and can loosen over time. -
✔✔Vibration
✔✔The _______ pulley adjusts the amount that the belt wraps around the drive pulley. -
✔✔Snub
✔✔________ conveyors are conveyor system that have unpowered rollers. - ✔✔Gravity
✔✔Which of the following provides and overflow or staging area for products on a
conveyor line? - ✔✔Accumulators
✔✔The process of examining a failure, following gathered evidence, and pinpointing a
probable cause is called ________. - ✔✔Cause and analysis
✔✔Briefly Explain how a bathtub curve illustrates the failure rate of products. - ✔✔
✔✔How are the properties of ductility and brittleness different? - ✔✔
✔✔The elastic limit is the point on a stress-strain curve at which plastic deformation
begins to take place and some deformation becomes permanent. - ✔✔
✔✔The formation of cavities or holes in the surface of a material is called ________. -
✔✔Pitting
✔✔List three factors that contribute to machinery vibration. - ✔✔
✔✔Machine ______ is (are) used to hold down the machinery to the foundation. - ✔✔
✔✔Which of the following is a measure of a martial's ability to deform without breaking
under a load? - ✔✔
✔✔The measure of how well a system reproduces an established out one under
uniform conditions is ________. - ✔✔Repeatability
✔✔What is the natural frequency of a machine? - ✔✔
, ✔✔Lubrication changes, checking and adjusting system pressures, and replacing filters
are considered ___________ tasks. - ✔✔Preventive maintenance
✔✔ What are 3 common causes of accidents in the workplace? - ✔✔Disobeying
company rules, losing temper, taking chances, forgetting safety details, showing off, day
dreaming, falling asleep
✔✔What can happen if you knowingly violate a safety code? - ✔✔OSHA can personally
fine you
✔✔Explain the purpose of OSHA. - ✔✔OSHA is Tasked with ensuring that employers
provide a safe and healthy workplace.
✔✔Explain the functions of the lock and the tag of a LOTO procedure. - ✔✔The lock
prevents others from reenergizing equipment while you are working on it. The tag
notifies others that the equipment has been taken out of service, who did it, and when it
was done.
✔✔Three types of energy that may be locked out using LOTO procedures are electrical,
mechanical, and ___________ - ✔✔Fluid energy
✔✔When more than one person is working on the same system, a _______ hasp
should be installed to enable each member of the team to install his or her own LOTO
lock. - ✔✔Multilock
✔✔It is important to keep your appendages and clothing away from any pint here
points. - ✔✔True
✔✔Permit- required confined spaces do not have the potential to cause death or
serious harm. - ✔✔False
✔✔When used by a trained person a(n) ________ device may be used to restart the
heart and save an individuals life. - ✔✔AED (automatic electrical defibrillator)
✔✔Explain why a flammable-materials safety cabinet should be grounded. - ✔✔To
prevent the build-up of a static charge.
✔✔What branch of OSHA conducts research and experimental programs to develop
criteria for safety and health standards? - ✔✔NIOSH (national institute for occupational
safety
UPDATED QUESTIONS AND SOLUTIONS RATED A+
✔✔What are the benefits of regularly inspecting equipment? - ✔✔
✔✔Threaded fasteners are subjected to ________ and can loosen over time. -
✔✔Vibration
✔✔The _______ pulley adjusts the amount that the belt wraps around the drive pulley. -
✔✔Snub
✔✔________ conveyors are conveyor system that have unpowered rollers. - ✔✔Gravity
✔✔Which of the following provides and overflow or staging area for products on a
conveyor line? - ✔✔Accumulators
✔✔The process of examining a failure, following gathered evidence, and pinpointing a
probable cause is called ________. - ✔✔Cause and analysis
✔✔Briefly Explain how a bathtub curve illustrates the failure rate of products. - ✔✔
✔✔How are the properties of ductility and brittleness different? - ✔✔
✔✔The elastic limit is the point on a stress-strain curve at which plastic deformation
begins to take place and some deformation becomes permanent. - ✔✔
✔✔The formation of cavities or holes in the surface of a material is called ________. -
✔✔Pitting
✔✔List three factors that contribute to machinery vibration. - ✔✔
✔✔Machine ______ is (are) used to hold down the machinery to the foundation. - ✔✔
✔✔Which of the following is a measure of a martial's ability to deform without breaking
under a load? - ✔✔
✔✔The measure of how well a system reproduces an established out one under
uniform conditions is ________. - ✔✔Repeatability
✔✔What is the natural frequency of a machine? - ✔✔
, ✔✔Lubrication changes, checking and adjusting system pressures, and replacing filters
are considered ___________ tasks. - ✔✔Preventive maintenance
✔✔ What are 3 common causes of accidents in the workplace? - ✔✔Disobeying
company rules, losing temper, taking chances, forgetting safety details, showing off, day
dreaming, falling asleep
✔✔What can happen if you knowingly violate a safety code? - ✔✔OSHA can personally
fine you
✔✔Explain the purpose of OSHA. - ✔✔OSHA is Tasked with ensuring that employers
provide a safe and healthy workplace.
✔✔Explain the functions of the lock and the tag of a LOTO procedure. - ✔✔The lock
prevents others from reenergizing equipment while you are working on it. The tag
notifies others that the equipment has been taken out of service, who did it, and when it
was done.
✔✔Three types of energy that may be locked out using LOTO procedures are electrical,
mechanical, and ___________ - ✔✔Fluid energy
✔✔When more than one person is working on the same system, a _______ hasp
should be installed to enable each member of the team to install his or her own LOTO
lock. - ✔✔Multilock
✔✔It is important to keep your appendages and clothing away from any pint here
points. - ✔✔True
✔✔Permit- required confined spaces do not have the potential to cause death or
serious harm. - ✔✔False
✔✔When used by a trained person a(n) ________ device may be used to restart the
heart and save an individuals life. - ✔✔AED (automatic electrical defibrillator)
✔✔Explain why a flammable-materials safety cabinet should be grounded. - ✔✔To
prevent the build-up of a static charge.
✔✔What branch of OSHA conducts research and experimental programs to develop
criteria for safety and health standards? - ✔✔NIOSH (national institute for occupational
safety
