construction technology(masonry) bundled exams all graded A

What is "grade" in terms for the structure? The slope of the land at the building site. What does "below grade" mean? Below the surface of the ground. What is the frost line? It marks the depth of penetration of frost into the ground. In cold climates, the frost line is normally...

State the typical values for the Young's modulus of Mild Steel, Concrete, Timber and Masonry If a beam had a second moment of area (I), and was spanning a distance (L) which material property would directly influence how much it would deflect under a constant load (F)? Youngs Modulus (E) ...

The amount of surface area on an uncored block that has holes extending through it is equal to less than _____. 25 percent As specified by ACI 530/ASCE 5/TMS 402, Building Code Requirements for Masonry Structures, the thickness of a mortar joint cannot exceed _____. 3/4 inch The term...

25 percent The amount of surface area on an uncored block that has holes extending through it is equal to less than 3/4 inch According to ACIthe thickness of a mortar joint cannot exceed buttering The term used to describe applying mortar to block is block require a different...

Bond Laying out masonry units to establish spacing. Closure unit The last brick to fill a course Compressive Strength The measure of how much weight a CMU can support without collapsing (measured in psi) Corner lead A lead built at a corner in which each course of masonry is...

scored Before cutting a masonry unit, the line on which the cut will be made must be clouds of dust 25 percent The amount of surface area on an uncored block that has holes extending through it is equal to less than 3/4 inch According to ACI the thickness of a mortar joint cannot e...

Bond Laying out masonry units to establish spacing. Closure unit The last brick to fill a course Compressive Strength The measure of how much weight a CMU can support without collapsing (measured in psi) Corner lead A lead built at a corner in which each course of masonry is...

Bond laying out masonry units to establish spacing Closure Unit last brick to fill a course Corner Lead lead built at a corner in which each course of masonry is shorter than the course below it Crowd the Line to touch the mason's line or place a masonry unit too close to t...

Bond Laying out masonry units to establish spacing. Closure unit The last brick to fill a course. Corner lead A lead built at a corner in which each course of masonry is shorter than the course below it. Crowd the line To touch the mason's line or to place a masonry unit to...

The arch shown is a . . . arch. B. radial Structural clay products include . . . B. brick, tile, and terra-cotta A cube of bricks contains . . . standard bricks. D. 500 Solid masonry units have voids occupying . . . B. more than 25 percent of their mass Rubble stone i...

The load bearing strength, rigidity, and wind resistance of a concrete block wall is increased by using _____. Steel reinforcing rods combined with grout Brick dimensions that include the thickness of the mortar joint are _____. Nominal sizes The brick structural bond pattern shown i...

What are the dimensions of masonry units? Specified, actual, dimensional tolerance, nominal what is specified dimension? Ideal final dimension of brick as specified by architect. Will always be some variation What is actual dimension? Actual size of each individual brick what...

Brick dimensions that include the thickness of the mortar joint are_________________. nominal sizes 3 MULTIPLE CHOICE OPTIONS The plan of action of what activities and projects a SkillsUSA chapter will undertake during a school year is called the_____________________. program of work 3 MU...