CHST Worksite Audit || A+ Guaranteed.
What is the shade number for shielded metal arc welding 1/16, 3/32, 1/8, 5/32 electrodes?
correct answers 10
What is the shade number for gas shielded arc welding (nonferrous) 1/16, 3/32, 1/8m 5/32
inch diameter electrodes? correct answers 11
What is the shade number for gas shielded arc welding (ferrous) 1/16m 3/32, 1/8, 5/32 inch
diameter electrodes? correct answers 12
What shade number is the shielded metal-arc welding 3/16, 7/32m 1/4 inch diameter
electrodes? correct answers 12
What shade number is 5/16, 3/8 inch diameter electrodes? correct answers 14
Atomic hydrogen welding is what shade? correct answers 10-14
What shade number is carbon-arc welding? correct answers 14
What shade number is soldering? correct answers 2
What shade number is torch brazing? correct answers 3 or 4
What shade number is light cutting, up to 1 inch? correct answers 3 or 4
What shade number is medium cutting, 1 inch to 6 inches? correct answers 4 or 5
What shade number is heavy cutting, over 6 inches? correct answers 5 or 6
What shade number is gas welding (light), up to 1/8 inch? correct answers 4 or 5
What shade number is gas welding (medium) 1/8 inch to 1/2 inch? correct answers 5 or 6
What shade number is gas welding (heavy), over 1/2 inch? correct answers 6 or8
What is among the most important safety precautions welders and metal cutters can take?
correct answers Proper eye protection.
Proper shade protection is very important to guard agains the damage caused by what?
correct answers UV and IR radiation created during these operations.
What is the ANSI/ASC code for eye protection with welding? correct answers Z49.1-88
According to the NSC "Accident Prevention Manual for Industrial Operations," tool rests
should be adjusted to not more than_____ fro the grinding wheel and tongue guards should
be adjusted to _______? correct answers 1/8 inch and 1/4 for the tongue guard
How often should powder actuated tools be inspected? correct answers Each day before
loading.
, Airless spray guns above ______psi must be equipped with a manual safety for operator
safety? correct answers 1000 psi
Does OSHA exempt concrete cleaning from the 30 psi limitation? correct answers Yes
What do the letters PT indicate on line one of safety shoe? correct answers Protective
sections of the standard which is followed by the last two digits for the year the standard with
which the footwear meets compliance. PT 91
What does FI on the safety shoe indicate? correct answers F for Female and I for the impact
resistance rating (75, 50, or 30 foot pounds)
The second line on the safety shoe, if it states MT, stands for what? correct answers
Metatarsal protection designation and rating (75, 50, or 30 foot pounds)
What does line 3 and 4 with the label Cd stand for? correct answers Conductive properties
What does line 3 and 4 with the label EH stand for correct answers Electrical Hazard
What does line 3 and 4 with the label Pr stand for? correct answers Puncture resistance
When working with explosives or blasting agents, equipment must not be operated
within_______ of loaded holes? correct answers 50 feet
True or False, drill holes should be large enough to freely admit the insertion of explosive
cartridges? correct answers True, you don't want them to be too tight.
True or False, primers must never be tamped with? correct answers True. Can't tamper
Drilling is permitted within _________ of remaining butts of old hoses if there is any
suspicion of unexploded charges? correct answers 50
What provides the best protection with dealing with hoisting and rigging equipment? correct
answers Before each job, inspecting the chains, slings and ropes.
A thorough inspection of all chains in use shall be made very how many months? correct
answers 12
OSHA Subpart P, Appendix B requires that an excavation in Type A soil that is open less
than 24 hours and is 12 feet or less in depth to have a maximum allowable slope of what?
correct answers 1/2:1
Little horizontal, longer vertical
Type C soil that is 20 feet or less in depth needs to have a maximum allowable slope of what?
correct answers 1 1/2:1
1 and 1/2 to 1.
Longer horizontal, shorter vertical
What is the shade number for shielded metal arc welding 1/16, 3/32, 1/8, 5/32 electrodes?
correct answers 10
What is the shade number for gas shielded arc welding (nonferrous) 1/16, 3/32, 1/8m 5/32
inch diameter electrodes? correct answers 11
What is the shade number for gas shielded arc welding (ferrous) 1/16m 3/32, 1/8, 5/32 inch
diameter electrodes? correct answers 12
What shade number is the shielded metal-arc welding 3/16, 7/32m 1/4 inch diameter
electrodes? correct answers 12
What shade number is 5/16, 3/8 inch diameter electrodes? correct answers 14
Atomic hydrogen welding is what shade? correct answers 10-14
What shade number is carbon-arc welding? correct answers 14
What shade number is soldering? correct answers 2
What shade number is torch brazing? correct answers 3 or 4
What shade number is light cutting, up to 1 inch? correct answers 3 or 4
What shade number is medium cutting, 1 inch to 6 inches? correct answers 4 or 5
What shade number is heavy cutting, over 6 inches? correct answers 5 or 6
What shade number is gas welding (light), up to 1/8 inch? correct answers 4 or 5
What shade number is gas welding (medium) 1/8 inch to 1/2 inch? correct answers 5 or 6
What shade number is gas welding (heavy), over 1/2 inch? correct answers 6 or8
What is among the most important safety precautions welders and metal cutters can take?
correct answers Proper eye protection.
Proper shade protection is very important to guard agains the damage caused by what?
correct answers UV and IR radiation created during these operations.
What is the ANSI/ASC code for eye protection with welding? correct answers Z49.1-88
According to the NSC "Accident Prevention Manual for Industrial Operations," tool rests
should be adjusted to not more than_____ fro the grinding wheel and tongue guards should
be adjusted to _______? correct answers 1/8 inch and 1/4 for the tongue guard
How often should powder actuated tools be inspected? correct answers Each day before
loading.
, Airless spray guns above ______psi must be equipped with a manual safety for operator
safety? correct answers 1000 psi
Does OSHA exempt concrete cleaning from the 30 psi limitation? correct answers Yes
What do the letters PT indicate on line one of safety shoe? correct answers Protective
sections of the standard which is followed by the last two digits for the year the standard with
which the footwear meets compliance. PT 91
What does FI on the safety shoe indicate? correct answers F for Female and I for the impact
resistance rating (75, 50, or 30 foot pounds)
The second line on the safety shoe, if it states MT, stands for what? correct answers
Metatarsal protection designation and rating (75, 50, or 30 foot pounds)
What does line 3 and 4 with the label Cd stand for? correct answers Conductive properties
What does line 3 and 4 with the label EH stand for correct answers Electrical Hazard
What does line 3 and 4 with the label Pr stand for? correct answers Puncture resistance
When working with explosives or blasting agents, equipment must not be operated
within_______ of loaded holes? correct answers 50 feet
True or False, drill holes should be large enough to freely admit the insertion of explosive
cartridges? correct answers True, you don't want them to be too tight.
True or False, primers must never be tamped with? correct answers True. Can't tamper
Drilling is permitted within _________ of remaining butts of old hoses if there is any
suspicion of unexploded charges? correct answers 50
What provides the best protection with dealing with hoisting and rigging equipment? correct
answers Before each job, inspecting the chains, slings and ropes.
A thorough inspection of all chains in use shall be made very how many months? correct
answers 12
OSHA Subpart P, Appendix B requires that an excavation in Type A soil that is open less
than 24 hours and is 12 feet or less in depth to have a maximum allowable slope of what?
correct answers 1/2:1
Little horizontal, longer vertical
Type C soil that is 20 feet or less in depth needs to have a maximum allowable slope of what?
correct answers 1 1/2:1
1 and 1/2 to 1.
Longer horizontal, shorter vertical
