Introduction to Masonry Exam 2025
Questions and Answers 100% Pass
Adobe - ✔✔Sun-dried, molded clay brick
Admixture - ✔✔A chemical or mineral other than water, cement, or aggregate
Calcium Silicate Units - ✔✔Cured with live steam, and used in high-temp locations.
Mortar Joint Thickness Max - ✔✔3/4 inch
Solid Brick - ✔✔Brick is classified as solid if no more than 25 percent of its surface is
cored.
Hoe - ✔✔a tool used to mix morter
bed joints - ✔✔applying mortar in a desired location with uniform thickness
the number of types that ASTM classifies concrete masonry units (block) into is______. -
✔✔six
The amount of surface area on an uncored block that has holes extending through it is
equal to less than _____. - ✔✔25 percent
As specified by ACI 530/ASCE 5/TMS 402, Building Code Requirements for Masonry
Structures, the thickness of a mortar joint cannot exceed _____. - ✔✔3/4 inch
The term used to describe applying mortar to block is _____. - ✔✔buttering
COPYRIGHT © 2025 BY OLIVIA WEST, ALL RIGHTS RESERVED 1
Questions and Answers 100% Pass
Adobe - ✔✔Sun-dried, molded clay brick
Admixture - ✔✔A chemical or mineral other than water, cement, or aggregate
Calcium Silicate Units - ✔✔Cured with live steam, and used in high-temp locations.
Mortar Joint Thickness Max - ✔✔3/4 inch
Solid Brick - ✔✔Brick is classified as solid if no more than 25 percent of its surface is
cored.
Hoe - ✔✔a tool used to mix morter
bed joints - ✔✔applying mortar in a desired location with uniform thickness
the number of types that ASTM classifies concrete masonry units (block) into is______. -
✔✔six
The amount of surface area on an uncored block that has holes extending through it is
equal to less than _____. - ✔✔25 percent
As specified by ACI 530/ASCE 5/TMS 402, Building Code Requirements for Masonry
Structures, the thickness of a mortar joint cannot exceed _____. - ✔✔3/4 inch
The term used to describe applying mortar to block is _____. - ✔✔buttering
COPYRIGHT © 2025 BY OLIVIA WEST, ALL RIGHTS RESERVED 1
