Va HIC | 87 Actual Questions and Answers with Complete Solutions 100% Correct

Va HIC | 87 Actual Questions and Answers
with Complete Solutions 100% Correct
The MINIMUM length drywall screw for installing 1/2 gypsum board to wood
studs is? - ANSWER 1 1/4


What type of paint will not chalk when applied to exterior walls? - ANSWER
Acrylic


What is the MINIMUM breaking strength required of safety belt lanyards? -
ANSWER 5,400 pounds


What is the MAXIMUM flame spread index for insulation materials? - ANSWER
25


The escape device for a trench over 4 ft deep must be within a maximum of
worker? - ANSWER 25 ft


What is the MINIMUM height for a stairway handrail? - ANSWER 34 inches


What is the MAXIMUM distance horizontal reinforcement must be placed from
the top of a masonry partition wall? - ANSWER No more than 16 inches on
center


A third stairway stringer should be used when the stair width exceeds? -
ANSWER 30 inches

, The standard guideline for spacing contraction joints is to space them in feet -
ANSWER 2 or 3 time the slab thickness in inches


What is the MINIMUM lap of riveted horizontal lap siding? - ANSWER 1 inch


What direction does heat flow? - ANSWER Hot to cold


What is the MAXIMUM distance between a ventilating opening in an under-floor
space and each corner of the building? - ANSWER 3 feet


Notches may NOT be located in the _____ of a joist span? - ANSWER Middle
1/3


For multiple-width masonry what is the MINIMUM thickness of grout between
masonry units and reinforcements? - ANSWER 1/4 inch


What is the MAXIMUM dimension of the ventilation coverings for under-floor
space? - ANSWER 1/4 inch


Notches shall not exceed? - ANSWER 1/6 the depth of the member


Notches shall not be longer than? - ANSWER 1/3 depth of the member