CSD Final Exam Practice Questions and Answers

CSD Final Exam Practice Questions and Answers which of the following is high noble metal - ANSWER-F Which of the following oral adjuncts would be the best option to clean around difficult to reach 3rd molars - ANSWER-end-tuft brush using the skill of olfaction the clinician can detect the following potential disease entities except one. - ANSWER-hoarseness martin is going to scale the distal surface of a molar tooth. which one of the following curets should he select for this task - ANSWER-gracey 13/14 what is the significance of a patient starting that they have had a hip replacement (artificial joint) - ANSWER-Pt may need to take antibiotic premedication Sadie wants to improve her ability to detect calculus. Which of the following techniques will help her achieve this goal? - ANSWER-lightly resting her middle finger on the shank on a powered instrument tip, which of the surfaces should never be adapted to the tooth surface because it could damage the tooth surface - ANSWER-point of the tip When activating the handpiece/tip of an ultrasonic unit, it is best to use more finger motion than you would with a hand instrument. The clinician should also use less angulation of the tip against the tooth than with a hand instrument. - ANSWER-Both True Copyright © KAYLIN 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH NOVEMBER, 2024 Copyright ©Stuvia International BV Page 2/26 On a powered instrument tip, which of the surfaces produces the least (lowest) amount of energy vibrations - ANSWER-face of tip (concave surface) The cervical spine has an outward curve and the lumbar spine has an inward curve - ANSWER-1st false, 2nd true Select the "Normal" adult pulse rate. - ANSWER-60-100 bpm What is the restoration in tooth #10 - ANSWER-MF Composite which of the following are design characteristics of an area-specific curet - ANSWER-Face offset at 70 degrees to terminal shank One working cutting edge per working end The Barnhart 5/6 can only be used in the posterior due to the angled shank design. - ANSWER-false The __________ ________ provides good access to the proximal surfaces apical to the contact areas. - ANSWER-pointed tip The tissue of the free gingiva fits closely around the tooth but is not directly attached to it. The free gingiva can be stretched away from the tooth surface with a periodontal probe. - ANSWER-both true If the patient's tongue is getting in the way, you should ask them to move it to the the other side. - ANSWER-false Which finger is your fulcrum finger? - ANSWER-ring How often does the HIPAA form need to be completed - ANSWER-only at first visit Copyright © KAYLIN 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH NOVEMBER, 2024 Copyright ©Stuvia International BV Page 3/26 The clinician should use the actual point of an explorer's working end to detect which of the following - ANSWER-signs of caries (none of the above) What part of the instrument is used on the tooth surface, also called the working end - ANSWER-A What is the filling in tooth #12 - ANSWER-DO Amalgam The lowest effective power setting should be used during powered instrumentation. Two criteria that should be considered to determine the power setting for powered instrumentation are the size of the calculus deposit and the diameter of the powered instrument tip. - ANSWER-both true The emergency oxygen tank can be used for a breather (on demand) or non-breather (positive pressure). - ANSWER-true Using more than the end 1-2mm of the 11/12 explorer is essential to avoid snagging the tissue. - ANSWER-false All of the following are acceptable positioning practices except _____ - ANSWER-sitting with weight on one hip The periodontal probe should be removed from the sulcus after each measurement. The pressure of the probe tip against the junctional epithelium should be between 10 and 20 g. - ANSWER-1st false, 2nd true What occlusal classification is shown - ANSWER-class III Which tooth is the arrow pointing to - ANSWER-Q What is the restoration in tooth #9 - ANSWER-DF composite Copyright © KAYLIN 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH NOVEMBER, 2024 Copyright ©Stuvia International BV Page 4/26 When removing calculus deposits with a powered instrument, what type of lateral pressure is recommended - ANSWER-light lateral pressure Upon opening the Tattnauer door following a complete cycle, I noticed that the instrument cassettes had been stacked instead of placed horizontally in the rack. What should I do - ANSWER-Restack instruments horizontally and run another cycle for full cycle What setting on the Tattnauer should be selected to run bagged cassettes - ANSWER-wrapped What teeth and surfaces are used for the DI-S - ANSWER-3B, 8F, 14B, 19L, 24F, 30L Trauma to a primary tooth could cause localized hypoplasia to the developing permanent tooth - ANSWER-true How many fingers are used to hold the instrument with the modified pen grasp - ANSWER-3 The space between the free gingiva and tooth surface is called: - ANSWER-gingival sulcus Complete drying of the hands is a key factor in effective hand washing, as microorganisms can proliferate on damp hands and damaged skin. - ANSWER-true Which handpiece should be seated on the far right - ANSWER-slow speed Clean utility gloves are worn when collecting barriers for your unit from central sterilization. - ANSWER-false Which of the following is a PFM? - ANSWER-D The transverse tip orientation is recommended for _______________ - ANSWER-Removing calculus above or slightly below the gingival margin Copyright © KAYLIN 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH NOVEMBER, 2024 Copyright ©Stuvia International BV Page 5/26 How long does it take to run the Miele Disinfection Vario and cycle - ANSWER-55 minutes What is the restoration in tooth #29 - ANSWER-DO amalgam Which of the following statements is incorrect regarding patient head position - ANSWER-Patient tilts head downward for maxillary access Systolic blood pressure measures: - ANSWER-Pressure in an artery when the heart is contracting If there is a "Code Red" or Code Blue" emergency in the MSU Dental Clinic, you will call 911 and 2111. - ANSWER-true How long should you depress the red positive pressure oxygen button if your patient is not breathing - ANSWER-until chest rises What is the filling in tooth #3 - ANSWER-MOD Amalgam Katie has walked a periodontal probe across the mesial surface until it touched the contact area. What should Katie do next - ANSWER-Lift the probe slightly and slant tip slightly under contact area and gently press downward to assess the col What is the adult epinephrine dosage? - ANSWER-3 mg What is the correct order for applying dental PPE (personal protective equipment) before patient care? - ANSWER-1: Place disposable gown or lab coat on 2: Fit mask over nose and mouth and secure with elastics over the ears 3: Place eye protection on and adjust to fit 4: Place gloves on hands and extend over the wrists Copyright © KAYLIN 2024/2025 ACADEMIC YEAR. ALL RIGHTS RESERVED FIRST PUBLISH NOVEMBER, 2024 Copyright ©Stuvia International BV Page 6/26 Sara is examining the working end of a periodontal instrument. The instrument has a rounded toe, rounded back, and 1 cutting edge that is lower than the other side. What design classification is this instrument? - ANSWER-area specific curet The cross section of a sickle scaler is a - ANSWER-triangle In a dental hygiene diagnosis, only 1 item (the most important one) should be listed as the etiology. - ANSWER-false What is the restoration in tooth #14? - ANSWER-gold crown Which term BEST describes the highlighted surfaces? - ANSWER-distal Which of the following does not describe correct neutral seated position for the clinician? - ANSWER-shoulders lifted up toward the ears Which tooth is the arrow pointing to? - ANSWER-G The millimeter markings on the probe in your kit are: - ANSWER-3,6,9,12 What is the restoration in tooth #15? - ANSWER-O amalgam Gloves provide complete protection against hand contamination. - ANSWER-false What is the restoration in tooth #3? - ANSWER-MOL amalga