LP Gas Master Qualifier: Liquid Transfer Questions and Answers 100% Correct

LP Gas Master Qualifier: Liquid Transfer
Questions and Answers 100% Correct
When bleeding gas or disconnecting filling adapters, you have gas and air present.
Which is the third source of ignition you must be aware of and not let its presence?

A. A Cell Phone
B. Cigarette
C. Static electricity
D. All of the above - ANSWER-D. All of the above

The area around the point of transfer within 5 feet is called?

A. Division 1
B. Flammable
C. Division
D. Confined area - ANSWER-A. Division 1

How many feet away must an ignition source be from the point of transfer?

A. 10 feet
B. 20 feet
C. 5 feet
D. 25 feet - ANSWER-D. 25 feet

A welder must be _______ away from the point of transfer.

A. 25 feet
B. 10 feet
C. 35 feet
D. 5 feet - ANSWER-C. 35 feet

Inspection of pressurized hose assemblies shall include inspection for the following?

A. Soft spots
B. kinks or flat spots
C. Damage to outer cover
D. All of the above - ANSWER-D. All of the above

The filling capacity of an LP Gas container shall be determined by these two methods
only?

A. Volume or Weight