Power Engineering - 4A3, 4A7, 4A11 Practice Questions
With Complete Solutions
( 4-090-1.5) A disadvantage of a cast iron boiler is:
a. It is subject to corrosion
b. Its difficult assembly
c. Its extremely high cost
d. They are prone to leaks in-between the sections Correct
Answers d. They are prone to leaks in-between the sections
(4-001-1.1) In the early days, owners of power plants hired
_____ workers, who started out doing manual labour and
through acquired experience they were promoted to jobs with
gradually increasing levels of skill.
A. Trained
B. Unskilled
C. Qualified
D. Highly educated Correct Answers B. Unskilled
(4-001-1.11) In a power plant, the power engineer may function
as a supervisor who directs others in the _____ operation on a
shift.
A. administrative and co-operative
B. safe and efficient
C. shipping and receiving
D. occasional careful Correct Answers B. safe and efficient
,(4-001-1.3) In order to produce greater efficiency, higher boiler
pressures were used. This led to _____ due to the employment
of unqualified power plant operators.
A. Higher efficiency
B. Economic gains
C. Serious accidents
D. Safer working conditions Correct Answers C. Serious
accidents
(4-001-1.5) The holder of a Certificate of Competency, the
classification of which authorises him or her to act as a engineer,
may sketch, construct, install, operate, repair, and give advice on
all things pertaining to any _____ in which that person is
employed.
A. Welding shop
B. Hydro plant
C. Fish plant
D. Power plant Correct Answers D. Power plant
(4-001-1.6) Unqualified individuals operating a power plant or
pressure plant risk the _____ of the plant and the general public.
a. Economy
b. Safety
c. Health
d. Resources Correct Answers b. Safety
(4-001-1.8) Power engineers are:
,A. Qualified to make design changes in a power plant
B. Qualified to perform any welding jobs in a power plant
C. Automatically Safety code officers in a power plant
D. Skilled workers who operate and maintain the equipment in a
power plan Correct Answers D. Skilled workers who operate
and maintain the equipment in a power plan
(4-001-1.9) Power engineers can usually expect to work:
A. Straight 12 hour day shifts
B. Straight 8 hour night shifts
C. Straight 12 hour night shifts
D. Rotating shifts Correct Answers D. Rotating shifts
(4-001-2.5) Which of the following is required in order to
progress to a higher certificate?
A. Education, experience, the next lower level certificate, and
pass SOPEEC examinations
B. Both education and the next lower level certificate
C. Hold the next lower level certificate only
D. Experience and education Correct Answers A. Education,
experience, the next lower level certificate, and pass SOPEEC
examinations
(4-001-3.1) Committees that establish standards are composed
primarily of which of the following elements?
a. Only experts from the industry and government
b. Only multi-National power corporations
, c. Experts from the industry, professional and insurance groups
and all levels of government
d. One government appointed standards board
e. One independent safety and standardisation board Correct
Answers c. Experts from the industry, professional and
insurance groups and all levels of government
(4-025-1.2) The main purpose of the Boiler and Pressure Vessel
Code is:
a. The promotion of efficient combustion
b. To protect life and property
c. To promote efficient boiler operation
d. To promote qualified training for operators Correct Answers
b. To protect life and property
(4-025-2.2) The investigation of an accident involving a power
plant:
a. may be carried out by the Chief Inspector of the jurisdiction.
b. Is not specified in a jurisdictional Act or Regulation.
c. Is not of concern to the Chief Inspector
d. Is clearly outlined in the Engineer's Regulations Correct
Answers a. may be carried out by the Chief Inspector of the
jurisdiction.
(4-025-3.1) To register a boiler, pressure vessel, a pressure
piping system, or a boiler fitting, within one of the provincial
jurisdictions,
With Complete Solutions
( 4-090-1.5) A disadvantage of a cast iron boiler is:
a. It is subject to corrosion
b. Its difficult assembly
c. Its extremely high cost
d. They are prone to leaks in-between the sections Correct
Answers d. They are prone to leaks in-between the sections
(4-001-1.1) In the early days, owners of power plants hired
_____ workers, who started out doing manual labour and
through acquired experience they were promoted to jobs with
gradually increasing levels of skill.
A. Trained
B. Unskilled
C. Qualified
D. Highly educated Correct Answers B. Unskilled
(4-001-1.11) In a power plant, the power engineer may function
as a supervisor who directs others in the _____ operation on a
shift.
A. administrative and co-operative
B. safe and efficient
C. shipping and receiving
D. occasional careful Correct Answers B. safe and efficient
,(4-001-1.3) In order to produce greater efficiency, higher boiler
pressures were used. This led to _____ due to the employment
of unqualified power plant operators.
A. Higher efficiency
B. Economic gains
C. Serious accidents
D. Safer working conditions Correct Answers C. Serious
accidents
(4-001-1.5) The holder of a Certificate of Competency, the
classification of which authorises him or her to act as a engineer,
may sketch, construct, install, operate, repair, and give advice on
all things pertaining to any _____ in which that person is
employed.
A. Welding shop
B. Hydro plant
C. Fish plant
D. Power plant Correct Answers D. Power plant
(4-001-1.6) Unqualified individuals operating a power plant or
pressure plant risk the _____ of the plant and the general public.
a. Economy
b. Safety
c. Health
d. Resources Correct Answers b. Safety
(4-001-1.8) Power engineers are:
,A. Qualified to make design changes in a power plant
B. Qualified to perform any welding jobs in a power plant
C. Automatically Safety code officers in a power plant
D. Skilled workers who operate and maintain the equipment in a
power plan Correct Answers D. Skilled workers who operate
and maintain the equipment in a power plan
(4-001-1.9) Power engineers can usually expect to work:
A. Straight 12 hour day shifts
B. Straight 8 hour night shifts
C. Straight 12 hour night shifts
D. Rotating shifts Correct Answers D. Rotating shifts
(4-001-2.5) Which of the following is required in order to
progress to a higher certificate?
A. Education, experience, the next lower level certificate, and
pass SOPEEC examinations
B. Both education and the next lower level certificate
C. Hold the next lower level certificate only
D. Experience and education Correct Answers A. Education,
experience, the next lower level certificate, and pass SOPEEC
examinations
(4-001-3.1) Committees that establish standards are composed
primarily of which of the following elements?
a. Only experts from the industry and government
b. Only multi-National power corporations
, c. Experts from the industry, professional and insurance groups
and all levels of government
d. One government appointed standards board
e. One independent safety and standardisation board Correct
Answers c. Experts from the industry, professional and
insurance groups and all levels of government
(4-025-1.2) The main purpose of the Boiler and Pressure Vessel
Code is:
a. The promotion of efficient combustion
b. To protect life and property
c. To promote efficient boiler operation
d. To promote qualified training for operators Correct Answers
b. To protect life and property
(4-025-2.2) The investigation of an accident involving a power
plant:
a. may be carried out by the Chief Inspector of the jurisdiction.
b. Is not specified in a jurisdictional Act or Regulation.
c. Is not of concern to the Chief Inspector
d. Is clearly outlined in the Engineer's Regulations Correct
Answers a. may be carried out by the Chief Inspector of the
jurisdiction.
(4-025-3.1) To register a boiler, pressure vessel, a pressure
piping system, or a boiler fitting, within one of the provincial
jurisdictions,
