CAP Mitchell Aerospace Test with Questions and Solutions
CAP Mitchell Aerospace Test with Questions and Solutions What is the second step in the flight profile? ANSWER Pilot gets ground movement clearance from control tower; is called taxi phase, continues from ramp onto taxiway and stops before entering a runway What is the third step in the flight profile? ANSWER the airplane's engine and accessories are checked, mixture is set, and makes sure all flight controls are moving properly before the pilot calls control tower for permission to continue to takeoff What is the fourth step in the flight profile? ANSWER Once cleared by the control tower the pilot continues on to the runway and starts the takeoff portion of the flight profile What is the fifth step in the flight profile ANSWER After takeoff the pilot goes into the climb portion. During this portion the control tower might ask the pilot to follow a specific traffic pattern. Once clear of traffic the pilot can continue to climb to the desired altitude. What is the sixth step in the flight profile ANSWER This is the cruise portion. The pilot levels off and selects one group of rules. VFR ANSWER Visual Flight Rules, dependes on weather and visibility. Based on a see and be seen basis IFR ANSWER Instrument Flight Rules, used when visibility is poor. Pilot must be trained and rated by the FAA.
Document information
- Uploaded on
- January 28, 2026
- Number of pages
- 39
- Written in
- 2025/2026
- Type
- Exam (elaborations)
- Contains
- Questions & answers
