EXCELLENTSCORES

My Woodshop Safety test|Questions with 100% Correct Answers Name the machine used to cut lumber parallel to the grain Table saw Where should the saw be before starting a cut on the radial arm saw? Behind the fence Where should your hands be and what should they be doing while making a crosscut on the radial arm saw? Your hands should never be in the path of the blade, while making a cut your left hand should hold the stock firmly against the fence at least 6 inches from the blade. Your ri...

Woodshop Test Question With Correct Answers.Already Passs!!! 4 inches maintain a _____ margin of safety from the blade, This means that you must keep your hands _______ away from the saw blade. safety glasses wear ______ proper keep the blade guard in the ______ position at all times firmly, fence hold stock ____ on the table and against the ____ so it does not shift or kick out when using the miter saw complete stop after making a cut, but before raising the saw blade on the miter saw...

Woodshop Exam |100% Correct Answers Graded A+ Scroll Saw - Safety -blade properly tensioned -blade teeth point DOWNWARD -table tilting lock it tightened -6' margin of safety should be maintained Scroll Saw -scroll moves up and down -has 'work hold down' feature -pull start knob to start machine and turn to adjust speed SCROLL SAW IS USED FOR MAKING CUTS WITH SHARP TURNS IN THIN WOOD. CAN MAKE INTERIOR CUTS (window) Oscillating Spindle Sander - Safety & Info -pick sanding dru...

Wood Shop Safety Test Study Guide Complete Questions with 100% Correct Answers What is the margin of safety? 4 inches. When using a saw, never... Feed the material faster than the saw blade can remove the wood easily. The palm sander is used for what? removing small amounts of material slowly. All small work should be secured with what? A clamp or vise. Make all adjustments on all power tools with the power off, except... When adjusting the speed of the lathe. Always cut.. Away fro...

Woodshop Safety Test Answers|Complete Questions with Correct Answers Safety instructions must be given before you are allowed to work on or operate any machine or tool You are not permitted to work on any equipment or machine if the ____________________ is not present instructor Guards and safety devices must be on all machines during operation Machinery must not be oiled or adjusted while in use A machine must be started and stopped only by the operator Do not leave a machine while i...

Woodshop Final Exam Review |Graded A+ Margin of Safety: Table Saw 4" Margin of Safety: Radial Arm Saw 6" Margin of Safety: Band Saw 2" Margin of Safety: Jointer 4" Margin of Safety: Planer N/A Margin of Safety: Sanders N/A Margin of Safety: Chop Saw 4" How to square a board: 1. Joint one edge 2. Rip board to desired width 3. Trim one end 4. Measure cut opposite end to desired length Board feet (all inches) T"xW"xH"/144 Board feet (height in feet) T"xW"xH'/12 T ...

Wood Shop Safety Test Review |Complete Questions with 100% Correct Answers Safety is the condition of being safe from risk or danger True Which of the following is NOT a helper to feed stock into a machine Straight edge Device that detects leaks to the ground and breaks an electric circuit GFCI This describes ingredients in materials, health hazards, and precautions to take MSDS This is an organization that establishes regulations about hazardous waste EPA This is an organization th...

Woodshop quiz Wih 100% Correct Answers What is the primary purpose of sanding? to prepare the wood surfaces by removing obstacles(milling marks, burnished wood) to the acceptance of stains and finishes. What must you do to prepare the project BEFORE APPLYING stain and finishes? 1. Fill imperfections such as holes and cracks with wood filler and sand smooth. 2. Sand and seal end grade with wood conditioner. 3. Properly sand(with the grain and with multiple grits of sandpaper-medium to fine)...

Woodshop Exam Review Questions With Correct Answers Graded A+ Back Saw A saw with very fine teeth and is often used in a miter box for cutting angles. The thin blade is reinforced with a ridge of thicker metal along the back of the saw. It cannot cut deeper than the ridge. Band Saw A machine tool with endless blade that travels around two pulleys and is used to cut thin or thick stock of wood in curve or straight form. Beading Bit Belt Sander A sanding machine on which the abrasive coati...

Woodshop Test Questions With 100% Correct Answers Safety instructions must be given before allowed to work/operate on any machine or Tool You're not permitted to work on any equipment/machine if the instructor is not Present Guards and safety devices must be on all machines during Operation Machinery must not be oiled or adjusted while in Use A machine must be started and stopped only by the Operator Do not leave a machine while it is Running When working on or near any machine or ...