- Study guides, Class notes & Summaries

Pipefitter Star Exam Part 2| Answered 100% correctly| Latest ! Lockout/Tagout Standard procedure used to safely de-energize equipment on circuits before they are worked on: Fall hazards, Electrical hazards, Caught in, Struck by Four focus inspectioin OSHA compliance officers look for: Plane End Square Cut (PESC) Thread and Coupling (T&C) Thread Both Ends (TBE) Steel pipe is supplied with the following end finish: Start/Stop, Regulate/Throttle, Relief, Reduce Four principle functions of...

-

27 pages

Written in 2025/2026

Grade A+

PaulMarks

Pipefitter Star Exam Part 1| Questions and correct answers| Latest Violent flashing and collapsing of vapor bubbles in a centrifugal pump is called. Cavitation Device that controls the pressure in a low pressure steam boiler Pressuretrol Function of an evaporator Absorb heat from the system Metal which has a high iron content ferrous Why should the angle between the leg of a swing and the load never be less than 30 degrees? More stress loads are applied on the sling What are two kind...

-

33 pages

Written in 2025/2026

Grade A+

PaulMarks

Pipefitter NCCER Test | Already Graded 100% Pass| Newest ! Convert 1/4 to its decimal equivalent. A) .01 B) .25 C) 0.4 D) 0.5 B Piping that is field-routed to a pump must be supported A) Off the pump suction B) Diagonally C) Independently D) Off the pump discharge C What is used when lighting a cutting torch ? A) Striker B) Cigarette lighter C) Match D) Any open flame A Where is specific information needed to install piping and associated items found ? A) Reliability network ...

-

49 pages

Written in 2025/2026

Grade A+

PaulMarks

pipe fitter test| Answered 100% correctly| Newest ! What does TE in TE-601 stand for? temperature element what does B.T.U stand for? British Thermal Unit what is the boiling point of water? 212*F What is 3.1416? Pi what is the circumference of a 15" pipe? (to the nearest tenth0 47" 4" in the hundredths of a foot is? .33 what is the take off for a 4" x 3" LR reducing 90* ell? 6" on isometric drawings what does RFWN mean? raised face weld neck what does the Pi in...

-

8 pages

Written in 2025/2026

Grade A+

PaulMarks

Pipefitter Star Exam Part 1| Questions and correct answers| Latest Violent flashing and collapsing of vapor bubbles in a centrifugal pump is called. Cavitation Device that controls the pressure in a low pressure steam boiler Pressuretrol Function of an evaporator Absorb heat from the system Metal which has a high iron content ferrous Why should the angle between the leg of a swing and the load never be less than 30 degrees? More stress loads are applied on the sling What are two kind...

-

33 pages

Written in 2025/2026

Grade A+

Thepassword

Pipefitter Star Exam Part 2| Answered 100% correctly| Latest ! Lockout/Tagout Standard procedure used to safely de-energize equipment on circuits before they are worked on: Fall hazards, Electrical hazards, Caught in, Struck by Four focus inspectioin OSHA compliance officers look for: Plane End Square Cut (PESC) Thread and Coupling (T&C) Thread Both Ends (TBE) Steel pipe is supplied with the following end finish: Start/Stop, Regulate/Throttle, Relief, Reduce Four principle functions of...

-

27 pages

Written in 2025/2026

Grade A+

Thepassword

Pipefitter Star Exam 2025| Questions and 100% Correct Answers| Latest ! What type of knot or hitch can be used for lifting a length of small-bore pipe vertically? a. bowline b. clove hitch c. granny knot d. sheepshank b. clove hitch What type of crane signal includes pointing the index finger to the ground and moving it in a circular motion? a. hoist b. lower c. boom down d. boom out b. lower What type of hand signal includes pointing the thumb down to the side of the body? a. lowe...

4.0

(1)

64 pages

Written in 2025/2026

Grade A+

PaulMarks

Pipefitter Star Exam Questions & Answers Latest Update 100% Verified

-

60 pages

Written in 2025/2026

Grade A+

Stuviatlas

Pipefitter 2 Study Guide Questions With Complete Solutions

-

15 pages

Written in 2025/2026

Grade A+

Classroom

Pipefitter Exam 8 With Questions And Verified Answers ||Already Graded A+|| Latest Update 2025/2026

-

19 pages

Written in 2024/2025

Grade A+

Daratoo

Pipefitter Nceer Certification Exam Latest 2025 With Actual Questions And Correct Verified Answers/Already Graded A+ 100% Guaranteed To Pass Concepts (All What You Need) Latest Edition 2024

-

35 pages

Written in 2024/2025

Grade A+

AcademicsExcellence

Who needs to inspect an excavation prior to the start of work each day? A) Forman B) Safety person C) Superintendent D) Competent person -Correct Answer D When performing a hydrostactic test, at what percentage of the MAXINUM intended test pressure should the test be paused and the system inspected? A) 25% B) 30% C) 50%D) 75% -Correct Answer C

-

51 pages

Written in 2024/2025

Grade A+

jackline98

Pipefitter Exam 2025 Updated Actual Exam With Correct Solutions.

-

31 pages

Written in 2024/2025

Grade A+

TRUSTEDHUB

Pipefitter Exam Actual Exam Complete Questions With Detailed Verified Answers (100% Correct Answers) /Already Graded A+

-

102 pages

Written in 2024/2025

Grade A+

TutorGemini

Pipefitter Star Exam Part 1

-

12 pages

Written in 2024/2025

Grade A+

GEEKA

List two requirements when demolishing a building? - 1. You must secure a plumbing permit 2. Must make all connections gas and water tight. Storm or sanitary drains shall be installed at a slope that produces a computed velocity of discharge of not less than - two feet per second What fitting could you legally install that the branch is larger than the main? - 4x3 closet bend (The enlargement of a three-inch closet bend or stub to four inches shall not be considered an obstruction). Tren...

-

22 pages

Written in 2024/2025

Grade A+

EXAMCAFE

Massachusetts Journeyman Pipefitter Revision Exam 2025/2026 Questions With Answers Graded A+

-

19 pages

Written in 2024/2025

Grade A+

EXAMCAFE

full area of the valve outlet - When a discharge pipe is used on a safety valve , the cross-sectional area shall not be less than which of the following? 406 degrees - What is the maximum temperature limitation for non-ferrous pipe to be used directly attached to a boiler? protect a steam pressure gauge - A syphon is used to _______________ . safety relieving capacity - The pipe sizes required for the boiler equalizer lined piped between the steam outlet and the return line are based on __...

-

7 pages

Written in 2024/2025

Grade A+

EXAMCAFE

Massachusetts Journeyman Pipefitter Exam Script 2025/2026 Questions With Answers Graded A+

-

8 pages

Written in 2024/2025

Grade A+

EXAMCAFE

Massachusetts Journeyman Pipefitter 2025/2026 Questions With Answers Graded A+

-

6 pages

Written in 2024/2025

Grade A+

EXAMCAFE