- Study guides, Class notes & Summaries

Air in Hydraulic System - Answer A spongy brake pedal may be caused by Excessive tire pressure - Answer Can not cause very erratic brake pulling while applying brakes Excessive brake pedal travel - Answer A power assist brake booster push rod that is too short will cause Brake drum machined beyond its limits - Answer Can cause brake pedal fade Repair leak and replace brake linings - Answer How to correctly service brake linings soaked with axle grease but still have a lot of lining l...

-

2 pages

Written in 2023/2024

Grade A+

Exampool

A cracked or torn vacuum diaphragm in a brake power booster would most likely cause: - Answer a hard pedal feel requiring very high pedal effort to stop to test a vacuum power brake booster in the vehicle, you should pump the brake pedal at least 4 times, hold the brake pedal depressed, and start the engine. the brake pedal should: - Answer drop slightly and remain firm A mechanic finds gear lube inside both rear drums on a rear wheel drive vehicle. What is most likely the cause of this pr...

-

4 pages

Written in 2023/2024

Grade A+

Exampool

This document features the most tested practice questions and verified answers for the ASE A5 Brake Certification exam, designed to help you prepare efficiently and pass with confidence. Realistic ASE-style practice questions Verified correct answers with explanations Covers braking systems, diagnostics, and repair concepts Based on the latest exam updates (2026) Ideal for technicians preparing for certification or recertification Perfect for anyone studying for the Automotive Ser...

-

11 pages

Written in 2025/2026

Grade A+

SmartNursePrep

Air in Hydraulic System - ANSWERA spongy brake pedal may be caused by Excessive tire pressure - ANSWERCan not cause very erratic brake pulling while applying brakes Excessive brake pedal travel - ANSWERA power assist brake booster push rod that is too short will cause torque the adjusting nut to a specified torque and back off the nut until it lines up with the hole and install the cotter pin - ANSWERWhen adjusting front wheel bearings,

-

2 pages

Written in 2025/2026

Grade A+

ClassRep2

Michigan State Brakes Certification Exams PACKAGE DEAL| BUNDLE contains the Latest 2025/2026 exams Questions with Verified Answers - Guaranteed success.

-

5 items

AcademiaExpert

When performing a vacuum booster function test, you should begin by pumping the brake pedal several times With the engine off Dented race (cup) on a beari g that has been shock loaded Brinelling When adjusting front wheel bearings, you torque the adjusting nut to a specified torque and back off the nut until it lines up with the hole and install the cotter pin ABS and TRACTION OFF indicator lights remain ON with the engine running. check for ABS or TCS diagnostic trouble codes, ...

-

3 pages

Written in 2024/2025

Grade A+

AcademiaExpert

Michigan ASE Brake Certification Exam Questions And Answers (Verified And Updated) Air in Hydraulic System - answerA spongy brake pedal may be caused by Excessive tire pressure - answerCan not cause very erratic brake pulling while applying brakes Excessive brake pedal travel - answerA power assist brake booster push rod that is too short will cause Brake drum machined beyond its limits - answerCan cause brake pedal fade Repair leak and replace brake linings - answerHow to correctly ser...

-

2 pages

Written in 2023/2024

Grade A+

Fyndlay

Michigan ASE Brake Certification | Questions And Answers Rated A+ Michigan ASE Brake Certification | Questions And Answers Rated A+

-

2 pages

Written in 2023/2024

Grade A+

Nipsey

Michigan ASE Brake Certification | Questions And Answers Rated A+ Michigan ASE Brake Certification | Questions And Answers Rated A+

-

2 pages

Written in 2023/2024

Grade A+

Labtech

The brakes are dragging on a vehicle. this could be cause by a. overfilled master cylinder reservoir b. low vacuum to the boost c. bypassing master cylinder d. quick take-up valve stuck open - Answer A : overfilled master cylinder reservoir why : an overfilled master cylinder reservoir cylinder would not allow for fluid expansion. this would cause the brakes to self apply as the fluid expanded as result in brake drag The brake pads are worn at an angle on a vehicle with a sliding b...

-

17 pages

Written in 2023/2024

Grade A+

Exampool

On a vehicle with single piston floating caliper front disc brakes, the brake pads on the left side of the vehicle are almost completely worn while the right side is almost new. Technician A says that too much rotor runout could be the cause. Technician B says that a binding caliper piston could be the cause. Who is right? - Answer Technician B only A customer complains that their vehicle pulls to the right when the brakes are applied. Technician A says a restricted brake line to the left cal...

-

5 pages

Written in 2023/2024

Grade A+

Exampool

A vehicle is equipped with a vacuum brake booster. It doesn't have power assist until the engine runs for a minute, then it begins to work normally. What is the most likely reason? A. Defective check valve B. Adjusted brake pedal push rod is too short C. Front brake disc is worn D. Engine requires a tune-up to produce a higher vacuum at idle speed - Answer Correct answer A - The defective check valve causes a loss in vacuum when the engine is off. That's why the power assist begins to func...

-

6 pages

Written in 2023/2024

Grade A+

Exampool

Michigan ASE Brake Certification Exam Questions and Answers

-

2 pages

Written in 2023/2024

Grade A+

millyphilip