Datums Samenvattingen, Notities en Examens
Op zoek naar een samenvatting over Datums? Op deze pagina vind je 112 samenvattingen over Datums.
Alle 112 resultaten
Sorteer op
-
Samenvatting Geschiedenis & Samenleving hoofdstuk 5 t/m 10 + hoofdstuk 12 t/m 14
- Samenvatting • 27 pagina's • 2023
-
- €5,83
- 15x verkocht
- + meer info
Samenvatting voor de toets geschiedenis en samenleving 
Tijdvak 5 t/m 10 + hoofdstuk 12 t/m 14 didactiek 
Daarnaast per tijdvak nog de belangrijke informatie (gebeurtenissen, datums en personen)
-
Samenvatting - Geschiedenis (Feniks) HAVO 3 - hoofdstuk 7 ( paragraaf 7.1 t/m 7.5 - De Koude Oorlog
- Samenvatting • 3 pagina's • 2024 Populair
-
- €2,69
- 4x verkocht
- + meer info
Dit is een samenvatting over de koude oorlog op Havo 3 niveau van het boek Feniks. De samenvatting gaat over de paragrafen 7.1 t/m 7.5. Er worden belangrijke mensen, begrippen, datums en landen genoemd. Ook staan er bij Russische namen de Russische vertalingen erbij.
-
Beroepsproduct 3.2: Ethisch en wettelijk onderbouwde zorgverlening
- Tentamen (uitwerkingen) • 23 pagina's • 2023
-
Ook in voordeelbundel
-
- €7,99
- 6x verkocht
- + meer info
Dit is de uitwerking van beroepsproduct 3.2 welke aan de orde komt in module 3 van de Duale HBO-V opleiding. Deze opdracht is beoordeeld met een V. De indicatoren 3 en 4 van de toetsmatrijs waren beoordeeld met een G de overige met een V. In de opdracht, komt het nijmeegse model ter spraken en een uitwerking van een ethische dillema. Op het eind volgt er nog een betoog omtrent een ethische vraagstuk. Namen, leeftijden, en datums zijn vanwege privacy zwart gemaakt, maar hebben geen invloed op de ...
-
Internationale politiek sinds 1945: begrippen + datum + namenlijst
- Overig • 27 pagina's • 2023
-
- €4,49
- 2x verkocht
- + meer info
Dit is een document met een uitgebreide begrippenlijst, lijst met alle namen, en lijst met alle datums die te kennen zijn/aan bod zijn gekomen in dit vak. Deze lijsten zijn van het vak internationale politiek sinds 1945 wat zowel in het eerste en tweede jaar bachelor politieke wetenschappen aan de KUL wordt gegeven. Dit vak wordt gedoceerd door Ria Lanen en dit document dateert van 2023.
-
MAE 1351 EXAM 3 WITH COMPLETE QUESTIONS AND ANSWERS
- Tentamen (uitwerkingen) • 11 pagina's • 2023
-
- €9,47
- 1x verkocht
- + meer info
MAE 1351 EXAM 3 WITH COMPLETE 
QUESTIONS AND ANSWERS 
Total runout (runout tolerance)[two arrows] - answer3D control for rotating parts relative to a 
datum axis. (cylindrical surface = controls circularity, straightness, taper, concentricity, and 
surface profile; flat surface = controls wobble, perpendicularity, and flatness) 
Basic dimensions (those with a box around them)... - answerare theoretically exact and locate the 
perfect position of features from clearly identified datums 
The featu...
-
Wijsgerige Pedagogiek Deel 1 (boek + powerpont slides)
- Samenvatting • 59 pagina's • 2023
-
- €4,79
- 6x verkocht
- + meer info
In deze samenvatting staat alle informatie uit het boek en de powerpoint. Ik had enkel deze samenvatting geleerd en was er van de eerste keer door.
-
Millwright-Installation & Levelling Exam Questions and Answers 2023 with complete
- Tentamen (uitwerkingen) • 2 pagina's • 2023
-
Ook in voordeelbundel
-
- €8,53
- 1x verkocht
- + meer info
Millwright-Installation & Levelling Exam Questions and Answers 2023 with complete 
@STUVATE-STUVIA 
 
What percent of mechanical breakdowns are due to misalignment? - 70% 
A "set" of machines (such as a driver-driven unit) share a common mounting called _____________ - Baseplates 
Machines that do not share a common base plate are fastened to __________ - Soleplates (or sub-bedplates) 
Primary equipment is set into place when? - First 
Prime movers (also referred to as drives or drivers) a...
-
MAE 1351 EXAM 3 2024 COMPLETE QUESTIONS AND ANSWERS ALREADY PASSED
- Tentamen (uitwerkingen) • 14 pagina's • 2024
-
Ook in voordeelbundel
-
- €12,79
- + meer info
Total runout (runout tolerance)[two arrows] - CORRECT ANSWER 3D control for rotating parts relative to a datum axis. (cylindrical surface = controls circularity, straightness, taper, concentricity, and surface profile; flat surface = controls wobble, perpendicularity, and flatness) 
Basic dimensions (those with a box around them)... - CORRECT ANSWER are theoretically exact and locate the perfect position of features from clearly identified datums 
The feature control frame - CORRE...
-
COKO RE EXAM WITH 100% CORRECT ANSWERS(VERIFIED FOR ACCURACY).
- Tentamen (uitwerkingen) • 55 pagina's • 2024
-
Ook in voordeelbundel
-
- €16,59
- + meer info
parcel 
portion of land delineated by boundaries 
 
 
 
• Real property 
ownership of real estate and the bundle of rights associated with owning the real estate. 
 
 
 
• Personal property 
ownership of anything that is not real estate, and the rights associated with owning the personal property item 
 
 
 
• Tangible property 
physical, visible, and material 
 
 
 
Intangible property 
abstract, having no physical existence in itself, other than as evidence of one's ownership interest. ...
-
MAE 1351 EXAM 3 QUESTIONS AND ANSWERS 100% CORRECT
- Tentamen (uitwerkingen) • 9 pagina's • 2023
-
Ook in voordeelbundel
-
- €10,90
- + meer info
MAE 1351 EXAM 3 QUESTIONS AND ANSWERS 100% CORRECTMAE 1351 EXAM 3 QUESTIONS AND ANSWERS 100% CORRECTMAE 1351 EXAM 3 QUESTIONS AND ANSWERS 100% CORRECTMAE 1351 EXAM 3 QUESTIONS AND ANSWERS 100% CORRECT 
 
Total runout (runout tolerance)[two arrows] - ANSWER-3D control for rotating parts relative to a datum axis. (cylindrical surface = controls circularity, straightness, taper, concentricity, and surface profile; flat surface = controls wobble, perpendicularity, and flatness) 
 
Basic dimensions (...