Kpa Samenvattingen, Notities en Examens
Op zoek naar een samenvatting over Kpa? Op deze pagina vind je 1152 samenvattingen over Kpa.
Pagina 4 van de 1.152 resultaten
Sorteer op
-
ABSA Practice 4A – 2 Questions with Complete Solutions 100% Verified Correct Answers
- Tentamen (uitwerkingen) • 38 pagina's • 2024
-
Ook in voordeelbundel
-
- €12,75
- + meer info
ABSA Practice 4A – 2 Questions with Complete Solutions 100% Verified Correct Answers 
 (4-014-2.2) 1 psi equals: 
Select one: 
a. 0.145 kPa 
b. 6.89 kPa 
c. 1 kilopascal 
d. 100 kPa - Correct Answer b 
 
(4-048-1.5) Gas pockets trapped within a weld are commonly called: 
Select one: 
a. Flux 
b. Porosity 
c. Spatter 
d. Slugging - Correct Answer b 
 
(4-089-2.1) The type of circuit used to store (write) and retrieve (read) information from a computer is known as its: 
Select one: 
a. RAM 
b. R...
-
PE 4th Part A ABSA Test Bank Questions With Complete Solutions Graded To Pass!!
- Tentamen (uitwerkingen) • 116 pagina's • 2023
-
Ook in voordeelbundel
-
- €19,18
- + meer info
PE 4th Part A ABSA Test Bank Questions With Complete Solutions Graded To Pass!! 
 
Introduction to Power Engineering 
Introduction to Power Engineering 
Which of the following is not a definition of a power plant? 
a) Any one or more boilers in which steam or other vapour is generated at more than 103 kPa (15 psi). 
b) Any one or more boilers containing liquid and having a working pressure exceeding 1100 kPa (160 psi). 
c) Any one or more boilers containing liquid and having a working temperatur...
-
ABSA Practice 4A - 1 Questions & Answers Already Graded A+
- Tentamen (uitwerkingen) • 39 pagina's • 2024
-
Ook in voordeelbundel
-
- €9,30
- + meer info
(4-081-1.16) The output voltage of a shunt DC generator is varied by adjusting the: 
Select one: 
a. Pole piece air gaps 
b. Output current 
c. EMF 
d. Field rheostat - Answer-d 
(4-085-1.11) The Bourdon tube is often shaped in the form of a "C", having an arc span of about: 
Select one: 
a. 270 degrees 
b. 90 degrees 
c. 180 degrees 
d. 200 degrees - Answer-a 
(4-037-2.7) The extinguishing medium for a Class "D" fire is: 
Select one: 
a. Carbon dioxide 
b. Dry powder 
c. Aqueous film formin...
-
4A Unit 12 Questions and Answers Graded A+
- Tentamen (uitwerkingen) • 42 pagina's • 2024
-
Ook in voordeelbundel
-
- €11,03
- + meer info
4A Unit 12 Questions and Answers 
 
Graded A+ 
 
(4-063-1.14) The operator, while blowing off a boiler, should have an assistant to: 
Select one: 
a. Open the blow-off tank drain 
b. Watch the gauge glass level 
c. Close the quick opening valve in a hurry 
d. Open the slow opening valve b. Watch the gauge glass level 
 
(4-091-3.3) In a mechanical atomizing burner with three fixed capacity burners, the Intermediate 
and high fire burner nozzles may have higher capacities than the primary burner ...
-
Sopeec Test bank 4A - Power Engineering Questions and Answers Already Passed
- Tentamen (uitwerkingen) • 14 pagina's • 2024
-
Ook in voordeelbundel
-
- €9,59
- + meer info
Sopeec Test bank 4A - Power 
Engineering Questions and Answers 
 
Already Passed 
 
Which of the following is not a definition of a power plant? 
 
a) Any one or more boilers in which steam or other vapour is generated at more then 103kpa 
(15psi) 
 
b) Any one or more boilers containing liquid and having working pressure exceeding 
1100kpa(160psi) 
 
c)Any one or more boilers containing liquid and having a working temperature exceeding 121 
degrees celsius (250 F) 
 
d) Any one or more boilers ...
Maak studiestress minder vervelend
-
ABSA Practice 4A – 2 | 150 Questions | With Complete Solutions.
- Tentamen (uitwerkingen) • 25 pagina's • 2023
-
Ook in voordeelbundel
-
- €15,82
- + meer info
ABSA Practice 4A – 2 | 150 Questions | With Complete Solutions. 
 
(4-014-2.2) 1 psi equals: 
Select one: 
a. 0.145 kPa 
b. 6.89 kPa 
c. 1 kilopascal 
d. 100 kPa 
b 
(4-048-1.5) Gas pockets trapped within a weld are commonly called: 
Select one: 
a. Flux 
b. Porosity 
c. Spatter 
d. Slugging 
b 
(4-089-2.1) The type of circuit used to store (write) and retrieve (read) information from a computer is known as its: 
Select one: 
a. RAM 
b. ROM 
c. Motherboard 
d. Bytes 
a 
In a Plant Line Trace s...
-
ABSA 4th Part B |100% Complete with A+ Graded Answers
- Tentamen (uitwerkingen) • 83 pagina's • 2024
-
Ook in voordeelbundel
-
- €18,22
- + meer info
ABSA 4th Part B 
Chapter 1 Introduction to Power Engineering 
 
 
In the early days, owners of power plants hired _____ workers, who 
started out doing manual labour and through acquired experience 
they were promoted to jobs with gradually increasing levels of skill. 
a. Qualified 
b. Highly educated 
c. Trained 
d. Unskilled 
e. College trained. 
d 
 
 
Early government involvement in certification of power engineers 
became more important for the following reasons except: 
a. Efficiency 
b. L...
-
ABSA 4th Part B |Complete With A+ Graded Answers
- Tentamen (uitwerkingen) • 83 pagina's • 2024
-
Ook in voordeelbundel
-
- €9,97
- + meer info
ABSA 4th Part B 
Chapter 1 Introduction to Power Engineering 
 
 
In the early days, owners of power plants hired _____ workers, who 
started out doing manual labour and through acquired experience 
they were promoted to jobs with gradually increasing levels of skill. 
a. Qualified 
b. Highly educated 
c. Trained 
d. Unskilled 
e. College trained. 
d 
 
 
Early government involvement in certification of power engineers 
became more important for the following reasons except: 
a. Efficiency 
b. L...
-
4A - I - Energy Plant Instrumentation and Controls Questions and Answers 100% Correct
- Tentamen (uitwerkingen) • 50 pagina's • 2024
-
Ook in voordeelbundel
-
- €11,51
- + meer info
4A - I - Energy Plant Instrumentation and 
Controls Questions and Answers 100% 
 
Correct 
 
When a process variable has no method of sending information 
to the final control element the system is known as 
 
a) an automatic system 
b) an open loop system 
c) a cascading system 
d) feedback system 
e) feedforward system b) an open loop system 
 
An open loop control system requires 
 
a) a transducer and a recorder 
b) minimum deviation from set point 
c) a very small amount of dead time or lag...
-
IFSTA 7th edition Chapter 13 hose operations and hose streams verified to pass 2023/2024
- Tentamen (uitwerkingen) • 14 pagina's • 2024
-
Ook in voordeelbundel
-
- €17,26
- + meer info
IFSTA 7th edition Chapter 13 hose operations and hose streamsDesigned for use in climates with freezing temperatures, the main control valve of this hydrant is located at the base or foot of the hydrant below the frost line - correct answer Dry barrel hydrant 
 
What type of stream is most commonly used for fires in confined spaces - correct answer Broken stream 
 
The velocity pressure at which water is discharged from the nozzle is (--) pressure - correct answer Nozzle pressure 
 
Recommended ...
Studiestress? Voor verkopers op Stuvia zijn dit juist gouden tijden. KA-CHING! Verdien ook aan je samenvattingen en begin nu met uploaden. Ontdek alles over verdienen op Stuvia