Studyclass

LOW PRESSURE LICENSING EXAM What is the result of accumulation of large amounts of dissolved minerals such as calcium and magnesium on the boiler heating surface? a) Caustic embrittlement b) Scale c) Pitting d) Corrosion - correct answer b) Scale Feedwater is heated to remove _____ from the boiler water to prevent corrosion. a) Oxygen b) CO2 c) Hydrogen d) Scale - correct answer a) Oxygen _____ draft is air that is pulled through the boiler by a fan. a) Induced b) Natural c) Forced d) Com...

Minnesota Class D Water ExamAccording to the Safe Drinking Water Act the basic definition of a public water supply system is any water system that supplies water for human consumption that serves: - correct answer 15 service connection or over 25 persons for over 60 days a year What federal law regulates public water supplies? - correct answer Safe Drinking Water Act What cause water to move through pores in soil and rocks ? - correct answer Gravity What are disease producing bacteria c...

Minnesota Master HPP DefinitionsTrue or False? Pipe fitting laws means chapter 5230 & 5231, and Minnesota Statutes, sections 326B.90 to 326B.925. - correct answer True _____means facts, information, or principles that are clearly relevant to the licensee's responsibilities under a license issued by the commissioner. These facts, information, or principles must convey substantive and procedural knowledge as it relates to post-licensing issues and must be relevant to the technical aspects of ...

Minnesota Special Engineer Boiler License Practice Exam Questions For the purpose of rating boiler horsepower for an Engineers License only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? - correct answer 10 Sq. Ft. Heating Surface What is meant by the term "Low Pressure Boiler"? - correct answer Boilers operating at a steam or other vapor pressure of 15psig or less, or a hot water or other liquid boiler in which the pressure does not excee...

MN Boiler License Questionsa question - correct answer an answer what are the conditions necessary for good combustion? a) low sulfur content b) Thermal, thermocoupler, tubular c) turbulence, temperature, time 3T's - correct answer c) turbulence, temperature, time 3T's why is secondary air necessary in hand fired boilers? a) Necessary to burn the combustible gases b) if primary air should fail c) used only if sulfur content is high - correct answer a) Necessary to burn the combus...

MN Boiler LicenseWhat is the maximum boiler horsepower you may take charge of on a chief engineer's license? - correct answer Unlimited A 1st class engineer may take charge of a boiler plant not to exceed - correct answer 500 Boiler HorsePower If you were to fail a chief engineer's exam, how long must you wait before you would be allowed to take the test again - correct answer 30 Days What should be displayed in the boiler room? - correct answer Engineer's License and Exemption or in...

Mn boiler testCSD-1 - correct answer Controls and Safety devices for automatically fired boilers A high pressure steam boiler is required to have two valves on the main steam lines - correct answer ASME boiler code jurisdiction ends after the second valve - correct answer Before starting a centrifugal pump, it is important to fill the pump casing with water . This is called priming the pump. - correct answer States (phases) of matter - correct answer Solid, Liquid, gases Pressu...

MN Boilers test practice (special) The dial on a steam gauge on a low-pressure boiler must be graduated from _ to _ times the maximum allowable working pressure - correct answer 1 1/2 to 2 What is the minimum size of pipe diameter that may be used to attach a steam gauge to a steam boiler? - correct answer 1/4 inch Steam boilers are designed to operate at or below what PSI? - correct answer 15 Liquid Boilers are designed to operate at or below what PSI? - correct answer 160 What is ...

MN Special Boiler License Exam Guide for MHS CustodiansHigh Pressure Boiler - correct answer Above 15psi steam & 160psi water pressure After blowing down column and glass the water should return how? - correct answer Quickly When entering a steam boiler room what is the first thing an operator should do? - correct answer Check water level What type of safety valve is required - correct answer A.S.M.E. approved direct spring loaded When operating a boiler what is most important? - cor...

MN Special Boilers License Prep TestSpecial (License Grade) - correct answer Work in any type of plant Grade C (License Grade) - correct answer Can operate low-pressure steam or hot water (no steam engines/turbines) Grade B (License Grade) - correct answer Can operate high-pressure or low-pressure steam or hot water (no steam engines/turbines) Grade A (License Grade) - correct answer Can operate any plant including plants with steam engines/turbines Special (License Class) - correct ...

MN Special Engineers Practice Examfor the purpose of rating boiler horsepower for an Engineers licence only, how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler? - correct answer 10 Sq. Ft. Heating Surface What is meant by the term Low Pressure Boiler? - correct answer boilers operating at a steam or other vapor pressure of 15 psig. or less, or a hot water or other liquid boiler in which the pressure does not exceed 160 psig. Or a temperature of 250...

MN State Special Boiler License Study GuideASME - correct answer American Society of Mechanical Engineers NBIC - correct answer National Board Inspection Code A high-pressure steam boiler is required to have ______ valves on the main steam line. - correct answer 2 10 square feet is equivalent to _____ boiler horsepower for conventional boilers - correct answer 1 Minimum size pipe to be used to connect a water column to high pressure boilers - correct answer 1 inch Water Columns of...

Practice Test #1Absolute pressure is equal to - correct anser gauge pressure plus atmospheric The MAWP on a High Presuure Steam Bolier is greater than - correct anser 15 PSIG The Asme Code states; Boilers with over _______ square feet of heating surface must have two or more safety valves. - correct anser 500 The ___________ regulates the high and low fire of the burner. - correct anser Modulating pressure control The water Column/Gauge Glass should be blown down ___________ - correc...

Second Class Boiler License 2nd MinnesotaCertificate of inspection. - correct answer means a sticker attached to the boiler or pressure vessel which documents the month and year of the inspection and the employer of the inspector performing the inspection. Certificate of registration - correct answer means a document that has been made available on the department's Web site that lists all registered boilers and pressure vessels at a location, including the last inspection date, the certifi...

Special Engineer Boiler Save Boiler Fundamentals ( Hermy 2 ) The low water fuel cutoff (LWCO) is a devices fitted to the boiler to shut off the______. - correct answer fuel supply to the burner when water level in the boiler is low The purpose of the spring in a safety valve is to_____. - correct answer close the valve disc against the seat The safety valve test lever must not be used unless______. - correct answer the pressure is about 75% of valve popping pressure A siphon tube is ne...

Special Engineers ExamA. 10 sq ft heating surface - correct answer For the purpose of rating boiler horsepower for an engineers license only, how many boiler square feet of boiler shall be equivilent to one boiler horsepower on a Boiler? A. 10 sq. ft. heating surface B. 5 sq. ft. heating surface C. 2.5 sq ft heating surface D. 20 sq ft heating surface B. Boilers operating at a steam or other vapor pressure of 15 psig or less, or a hot water or other liquid boiler that doesnt exceed 160 ...

State of Minnesota C Class RequirementsSpecial Engineer - correct answer All classes of boilers are allowed to be operated. 50 HP - correct answer The maximum horsepower a Special Engineer can be in charge of in a plant. 100* HP - correct answer The maximum horsepower a Special Engineer can operate a a Shift Engineer as an apprentice in any plant under "direct supervision." 2-C Experience Requirement - correct answer 1 year of boiler experience is needed before a Special Engineer may ...

water boiler test for the purpose of writing a boiler horsepower for engineers license only how many square feet of boiler surface shall be equivalent to one boiler horsepower on a boiler - correct answer 10 Sq. ft heating surface what is meant by the term low pressure boiler - correct answer boiler operating on a steam or other vapor pressure of 15 psi or less or a hot water or other liquid boiler in which the pressure does not exceed 160 psi or doesn't exceed the temperature of 250 degree...

Special Boiler License Practice Exam Minnesota How many way can heat be transferred? - correct answer Three (Conduction -- Convection -- Radiation) How may types of low pressure are there? - correct answer Three Boiler and boiler fitting used in the state of Minnesota must be constructed to what code? - correct answer A.S.M.E What controls the starting ans stopping of the burner by sending the temperature of the water in a hot water boiler? - correct answer Aqua Stat When a hydrosta...

4-hour annuity trainingThe annuitization of a nonqualified annuity's funds is subject to taxation in accordance with: - correct answer an exclusion ratio Seventy-year-old Patrice elects to annuitize her fixed deferred annuity under a straight life option. She had originally invested $25,000 in the contract; the contract was worth $80,000 at annuitization. According to IRS life expectancy tables, Patrice will live for 16 years. Her annual annuity income is $6,800. How much of that is taxable?...