- Study guides, Class notes & Summaries

Instrumentation Exam 2 Exam With Correct Questions And Answers 2025

-

7 pages

Written in 2024/2025

Grade A+

nashshii2

Instrumentation PRACTICE test (103Q's) Exam Questions And Correct Answers. Density is analyzed using all the following methods EXCEPT: - answerdensitometer The program that is permanently entered into a PLC processor is called what? - answerfirmware What does DCS stand for? - answerdistributed control system Hazards from aerosol cans include all of the following EXCEPT: - answerimplosion due to sudden gas release In PLCs, how many possible states do discrete inputs have? - answertwo ...

-

7 pages

Written in 2024/2025

Grade A+

Brightstars

True or False? Process technicians should be aware of general equipment problems as well as instrument problems. - Answer True True or False? To know what is wrong, you must first know what is right. - Answer True Transmitter malfunction - Answer Calibration shifts Signal Wire malfunction - Answer -Too much loop resistance Thermocouple malfunction - Answer Burnout Impulse tubing malfunction - Answer Plugged or partially plugged One of the best ways to begin tr...

-

6 pages

Written in 2026/2027

Grade A+

TestSolver9

what best determines the required torque for bolt tensioning - Answer grade of bolt what does the ''PI'' in PI-209 stand for - Answer pressure indicator line markings on the head of bolts and screws indicate - Answer grade witch of the following materials is selected when resistance to corrosion or high temperature is required - Answer nonferrous alloy the letter ''EL'' on a blue print stands for - Answer elevation before performing a continu...

-

9 pages

Written in 2026/2027

Grade A+

TestSolver9

Normally Closed (NC) contacts on a relay are closed when the coil is in what state? - Answer de-energized Normally Open (NO) contacts on a relay are closed when the coil is in what state? - Answer energized A device that uses electrical energy to mechanically switch electrical circuits is called a(n): - Answer electromechanical relay Electromechanical solenoids use electrical energy to magnetically cause a(n): - Answer mechanical control action Another name for a plug-in ...

-

10 pages

Written in 2026/2027

Grade A+

TestSolver9

Resistors can be divided into two broad categories. Name the categories. - Answer a) fixed resistors b) variable resistors List three basic types of fixed resistors, based on their construction. - Answer a) composition b) film c) wire wound List the two different types of variable resistors. - Answer a) rheostats b) potentiometers Name three distinct ratings that are related to resistors. - Answer a) resistance b) power c) tolerance A resistor has a resistance label...

-

27 pages

Written in 2026/2027

Grade A+

TestSolver9

The typical working environment for an instrument technician? . Select one: sts of indoor work that is climate controlled always safe and clean y changes from day to day s greatly and frequently involves hazardous conditions - Answer varies greatly and frequently involves hazardous conditions To ? a process is to cause a system to act or function in a certain way. Select one: rate ol check leshoot - Answer control Who may remove a technician's lock in a lockout/tagout ...

-

4 pages

Written in 2026/2027

Grade A+

TestSolver9

analog instrument - Answer use continuously variable electrical quantities to measure, amplify, and/or produce a standard output signal such as 4-20 mA flyball governer - Answer the first example of feedback control in 1775 sightglass - Answer A manual control where the technician looks in the gauge or sight glass and makes an appropriate adjustment that directly affects the process variable. henry nyquist - Answer published the first theoretical paper on automatic process c...

-

9 pages

Written in 2026/2027

Grade A+

TestSolver9

Feedback control is based on the measurement of which variable? a. Disturbance b. Controlled c. Manipulated d. Load - Answer b. Controlled Which of the following would normally be selected to provide "fail safe" conditions on a process? - Answer Valve Operation Proportional control action is based on: - Answer Magnitude of error 4. Derivative control mode action is based on: - Answer Rate of change of error 5. Control system tuning is a means to match what? - An...

-

7 pages

Written in 2026/2027

Grade A+

TestSolver9

Regulating - Answer Process control isvtye act of _______ one or more process variables. TRANSMITTER- a device that transmits a signal from one device to another. CONTROLLER-an instrument that receives a signal from the transmitter and compares it to a set point and produces an output to a final control element. FINAL CONTROL ELEMENT- the last active device in an instrument control loop, directly controls the dependent variable. - Answer List the three most common control instruments ...

-

7 pages

Written in 2026/2027

Grade A+

TestSolver9

a - Answer The total equivalent resistance of three resistances in a series circuit can be given as: Choose one answer. a. R1 + R2 + R3 b. (1/R1) + (1/R2) + (1/R3 ) c. (R1/1) + (R2/2) + (R3/3) d. R1 x R2 x R3 e. (R1 + R2 + R3) / 3 e - Answer The voltage required to force a current of 15 A through a resistance of 5 Ω will be _____ V. Choose one answer. a. 0.33 b. 3 c. 7.5 d. 33 e. 75 e - Answer When 1 ampere of current flows through a resistance by th...

-

136 pages

Written in 2026/2027

Grade A+

TestSolver9

A technician working in a refinery is required to open a process line that was previously in use. What document can the technician use to select the proper personal protective equipment? - Answer safety data sheet confined space - Answer 1. A space large enough for a worker to bodily enter and perform assigned work 2. A space not designed for continuous human occupancy 3. A space with limited means for entry or exit A ? utilizes a sensing element to measure a process variable and s...

-

6 pages

Written in 2026/2027

Grade A+

TestSolver9

most life threatening hazards on a construction site include the following - Answer Chemical exposure person's heart begins to fibrillate due to electrical shock the solution is to ________ - Answer Have qualified person use emergency defibrillation equipment The majority of injuries due to electrical shock are caused by - Answer Contact with low voltage conductors Class 0 rubber gloves are used when working with voltages less than - Answer 1,000 volts An important use...

-

28 pages

Written in 2026/2027

Grade A+

TestSolver9

1. the density of a fluid affect the displacers a. location b. buoyancy c. length d. height - Answer b 2. what mode must the controller be in before any changes are made to the process variable a. manual b. automatic c. shut down d. power off - Answer a 3. bills of material are found in a. General Arrangement drawings b. instrument detail drawings c. piping orthographics d. p&id - Answer a 4. when bench calibrating a temperature RTD transmitter, the the instrumen...

-

20 pages

Written in 2026/2027

Grade A+

TestSolver9

The simplest method for accurately measuring piping or tubing prior to assembly is the _____. - Answer Shoulder to shoulder method The colors of the conductors of a type j thermocouple are typically? - Answer White and red If a persons heart is out of rhythm due to an electrical shock, the solution is to __________ - Answer Have a qualified person use emergency defibrillation equipment One mA is a unit of measure for current equal to _______ - Answer .001 amperes How many...

-

37 pages

Written in 2026/2027

Grade A+

TestSolver9

Difference between 4-20mA signal and a 0-10v signal? - Answer Both are analog signals. 4-20mA is preferred because it has a live zero that can be referenced against a true zero. Its also less susceptible to electrical noise. 0-10v is easier to implement but more prone to interference and voltage drop. Typically used for short runs. Describe the process you take to calibrate an instrument. - Answer -Gather tools and materials needed. -Gather documentation. -Inspect instrument for da...

-

5 pages

Written in 2026/2027

Grade A+

TestSolver9

Process - Answer A series of actions or operations resulting in a change or a change of state Process System - Answer A system that changes the state of the fluid inside the system Process Control System - Answer Measures the value of a process system variable and causes an action to occur that will maintain the controlled variable as desired Variable - Answer A quantity that is subject to variation or change Measured Variable - Answer The condition, property or quanti...

-

22 pages

Written in 2026/2027

Grade A+

TestSolver9

psia=psig+atmospheric pressure - Answer The relationship between absolute pressure and gauge pressure is expressed as__________. Isolate a pressure-sensing element from rapid pressure changes - Answer The purpose of a snubber is to___________. The actual quantity of fluid that passes a given point per unit of time - Answer The definition of the term flow is____________. 50 - Answer A pressure gauge that measures psig indicates a reading of 35.3. The local atmosphere pressure...

-

11 pages

Written in 2026/2027

Grade A+

TestSolver9

instrumentation test exam (New Update) Questions & Answers -Grade A- 100- Correct C++ Programming Final Exam (Verified Solutions).

-

39 pages

Written in 2026/2027

Grade A+

examvaulthub

Instrumentation Final Exam UPDATED ACTUAL QUESTIONS AND CORRECT ANSWERS What is a Musculoskeletal Disorder (MSD)? - CORRECT ANSWER over time, often due to ergonomic hazards. An injury that occurs What are some examples of ergonomic hazards for dental hygienists? - CORRECT ANSWER Awkward postures, fixed working positions, force, repetitive movements What portion of the instrument is this? - CORRECT ANSWER Shank Which instrument is used to detect texture and character o...

-

7 pages

Written in 2026/2027

Grade A+

STANFORDTOPGRADES

INSTRUMENTATION (COMBUSTION) PROCESS FINAL EXAM REVIEW QUESTIONS & VERIFIED CORRECT ANSWERS refers to the Certified Fire and Explosion Investigator (CFEI) certification offered by the National Association of Fire Investigators (NAFI). It is one of the most recognized professional credentials in fire investigation.

-

4 pages

Written in 2025/2026

Grade A+

STUVIA2024

Instrumental Analysis ACS Exam 2026 Questions with Answers

-

10 pages

Written in 2025/2026

Grade A+

Sharonharry