- Study guides, Class notes & Summaries
Looking for the best study guides, study notes and summaries about ? On this page you'll find 22 study documents about .
22 results
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 3 Questions With 100% Correct Answers!!
Which type of oil produces higher fluid friction? 
Select one: 
a. High viscosity oil 
b. Low viscosity oil 
c. Synthetic oils 
d. Fixed oils - Answer-a 
A counter-flow cooling tower _____________ than a crossflow cooling tower. 
Select one: 
a. requires less fan power 
b. has a lower pressure drop 
c. is shorter 
d. requires less floor space - Answer-d 
Which of the following are chemicals used for boiler cleaning and treatment, that require careful control 
and vigilant monitoring? 
Select one...
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 3 QUESTIONS AND 
DETAILED ANSWERS
PopularABSA: 4th Class Part B - Comprehensive Exam 3 QUESTIONS AND 
DETAILED ANSWERS
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam Questions with Verified Answers | Latest 2025/2026.
ABSA: 4th Class Part B - Comprehensive Exam Questions with Verified Answers | Latest 2025/2026.
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 4 2025
ABSA: 4th Class Part B - Comprehensive Exam 4 2025
Exam (elaborations)
ABSA: 4th Class Part B -Comprehensive Exam 4 | 100% VERIFIED CORRECT
ABSA: 4th Class Part B -Comprehensive Exam 4 | 100% VERIFIED CORRECT
Exam (elaborations)
ABSA: 4th Class Part B -Comprehensive Exam 4 150 Multiple Choice, 4th Class Part B , Units 1-12.
ABSA: 4th Class Part B -Comprehensive Exam 4 150 Multiple Choice, 4th Class Part B , Units 1-12.
Package deal
Absa Exams
Absa Exams - Questions And Answers - Bundle
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 5- 150 Questions and answers
ABSA: 4th Class Part B - Comprehensive Exam 5- 150 Questions and answers
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 3 Questions and answers
ABSA: 4th Class Part B - Comprehensive Exam 3 Questions and answers
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 4
ABSA: 4th Class Part B - Comprehensive Exam 4
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 1 – Questions and Answers
ABSA: 4th Class Part B - Comprehensive Exam 1 – Questions and Answers
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 1 Latest Update Graded A+
Temporary hardness in feedwater is caused by: 
Select one: 
a. Magnesium sulphate 
b. Calcium carbonate 
c. Magnesium bicarbonate 
d. Sodium nitrate c 
What is the recommended boiler water pH for wet layup? 
Select one: 
a. 10 
b. 12 
c. 7.5 
d. 7 aA photoelectric flame scanner: 
Select one: 
a. Produces a steady voltage signal 
b. Requires a clear line of sight to the flame 
c. conducts current through the flame 
d. uses a pilot-stat b 
Heavy oil recovered using SAGD or CSS is properly referred...
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 2 Latest Update Graded A+
What must be located outside a Class T machinery room? 
Select one: 
a. Spare flashlights 
b. Disposable coveralls 
c. Machinery shut off switch 
d. Light switches c 
Degradation of heat transfer fluid of a hot oil system will begin to occur if: 
Select one: 
a. The oil filter is not serviced regularly 
b. The oil temperature is above a specified range, for an extended period of time 
c. The oil is allowed to churn in the circulating pump 
d. The oil becomes too viscous bDry and flooded evaporat...
Package deal
Absa Exam Package Deal With Complete Solutions Graded A+
Absa Exam Package Deal With Complete Solutions Graded A+
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 1 Latest Update Graded A+
Temporary hardness in feedwater is caused by: 
Select one: 
a. Magnesium sulphate 
b. Calcium carbonate 
c. Magnesium bicarbonate 
d. Sodium nitrate c 
What is the recommended boiler water pH for wet layup? 
Select one: 
a. 10 
b. 12 
c. 7.5 
d. 7 a
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 4 Questions with Verified Solutions
One of the legal responsibilities of the engineer during an inspection is: 
Select one: 
a. To notify the Workers Compensation Board of the inspection 
b. Point out any known or suspected defects to the inspector 
c. To have at least two staff members present at all times 
d. To be in possession of an inspection certificate b 
The _____ tubes of a fired hot oil heater have fins on their outer surfaces. 
Select one: 
a. Water 
b. Radiant 
c. Extended type 
d. Fire c
Exam (elaborations)
ABSA: 4th Class Part B - Comprehensive Exam 2 Latest Update Graded A+
What must be located outside a Class T machinery room? 
Select one: 
a. Spare flashlights 
b. Disposable coveralls 
c. Machinery shut off switch 
d. Light switches c 
Degradation of heat transfer fluid of a hot oil system will begin to occur if: 
Select one: 
a. The oil filter is not serviced regularly 
b. The oil temperature is above a specified range, for an extended period of time 
c. The oil is allowed to churn in the circulating pump 
d. The oil becomes too viscous b
Exam (elaborations)
ABSA: 4th Class Part B -Comprehensive Exam 4 | 150 Multiple Choice, 4th Class Part B , Units 1-12. 2024/25
ABSA: 4th Class Part B -Comprehensive Exam 4 | 150 Multiple Choice, 4th Class Part B , Units 1-12. 2024/25
Exam (elaborations)
ABSA: 4th Class Part B -Comprehensive Exam 4 | 150 Multiple Choice, 4th Class Part B , Units 1-12. 2024/25
ABSA: 4th Class Part B -Comprehensive Exam 4 | 150 Multiple Choice, 4th Class Part B , Units 1-12. 2024/25
Package deal
ABSA Exam Bundle

Exam (elaborations)
ABSA part B | Questions and answers | Latest 2024/25

2
Exam (elaborations)
ABSA part B | Questions and answers | Latest 2024/25

3
Exam (elaborations)
ABSA 4a Exam | LATEST 2024

4
Exam (elaborations)
ABSA: 4th Class Part B -Comprehensive Exam 4 | 150 Multiple Choice, 4th Class Part B , Units 1-12. 2024/25

5
Exam (elaboration