CSWA SOLIDWORKS CERTIFICATION EXAM REAL
EXAM 2026 | ALL QUESTIONS AND CORRECT
ANSWERS | VERIFIED ANSWERS | BRAND NEW
VERSION!
What operations will invoke the trim entities command? ---------
CORRECT ANSWER-----------------Tools>Sketch Tools>Trim Entities,
Command Manager->Sketch Toolbar->Trim Entities, Right Click on
sketch->Trim entities
What trimming method is considered to be the most flexible trimming
method and requires the cursor to be dragged over the entities to be
erased? ---------CORRECT ANSWER-----------------Power Trim
The function of the red square which appears as the power cursor is
being dragged is _____. ---------CORRECT ANSWER-----------------To allow
the user to undo unwanted trims
True or False - The second axis set for an ellipse is the minor axis which
must be smaller than the major axis set beforehand. ---------CORRECT
ANSWER-----------------False
,True or False - The Partial Ellipse tool has an option to specify what
angle the ellipse contour passes through. ---------CORRECT ANSWER------
-----------True
: Creates 3 default orthographic views of the model (Top, Front, Right
Side). ---------CORRECT ANSWER-----------------Standard 2 View
: Omit a portion of a view and are enclosed using a sketch, such as a
spline, and is similar to a detail view but does not create an additional
zoomed in view. ---------CORRECT ANSWER-----------------Crop View
: Show a range of motion in a 2D drawing and will usually be an
assembly and a superimposed view in a different line font indicating
how one or more components can move. ---------CORRECT ANSWER------
-----------Alternate Position View
When sketching a Centerpoint Straight Slot, the second point selection
sets: ---------CORRECT ANSWER-----------------The endpoint of the central
axis
, What sketch tool requires more than 3 points to be selected to create
the profile? ---------CORRECT ANSWER-----------------Partial Ellipse
If a horizontal straight slot has been drawn without any sketch relations
or dimensions added, which aspects of the sketch will be modified
when the endpoint of the centerline is dragged? ---------CORRECT
ANSWER-----------------The length and vertical position of the slot
Before starting the exam: ---------CORRECT ANSWER-----------------Open
SolidWorks, open new part file, set units, and set material.
Used in SOLIDWORKS in both Sketches and Features to control the
value of a dimension. ---------CORRECT ANSWER-----------------Global
Variables
A single view based on a predefined view orientation. ---------CORRECT
ANSWER-----------------Model View
EXAM 2026 | ALL QUESTIONS AND CORRECT
ANSWERS | VERIFIED ANSWERS | BRAND NEW
VERSION!
What operations will invoke the trim entities command? ---------
CORRECT ANSWER-----------------Tools>Sketch Tools>Trim Entities,
Command Manager->Sketch Toolbar->Trim Entities, Right Click on
sketch->Trim entities
What trimming method is considered to be the most flexible trimming
method and requires the cursor to be dragged over the entities to be
erased? ---------CORRECT ANSWER-----------------Power Trim
The function of the red square which appears as the power cursor is
being dragged is _____. ---------CORRECT ANSWER-----------------To allow
the user to undo unwanted trims
True or False - The second axis set for an ellipse is the minor axis which
must be smaller than the major axis set beforehand. ---------CORRECT
ANSWER-----------------False
,True or False - The Partial Ellipse tool has an option to specify what
angle the ellipse contour passes through. ---------CORRECT ANSWER------
-----------True
: Creates 3 default orthographic views of the model (Top, Front, Right
Side). ---------CORRECT ANSWER-----------------Standard 2 View
: Omit a portion of a view and are enclosed using a sketch, such as a
spline, and is similar to a detail view but does not create an additional
zoomed in view. ---------CORRECT ANSWER-----------------Crop View
: Show a range of motion in a 2D drawing and will usually be an
assembly and a superimposed view in a different line font indicating
how one or more components can move. ---------CORRECT ANSWER------
-----------Alternate Position View
When sketching a Centerpoint Straight Slot, the second point selection
sets: ---------CORRECT ANSWER-----------------The endpoint of the central
axis
, What sketch tool requires more than 3 points to be selected to create
the profile? ---------CORRECT ANSWER-----------------Partial Ellipse
If a horizontal straight slot has been drawn without any sketch relations
or dimensions added, which aspects of the sketch will be modified
when the endpoint of the centerline is dragged? ---------CORRECT
ANSWER-----------------The length and vertical position of the slot
Before starting the exam: ---------CORRECT ANSWER-----------------Open
SolidWorks, open new part file, set units, and set material.
Used in SOLIDWORKS in both Sketches and Features to control the
value of a dimension. ---------CORRECT ANSWER-----------------Global
Variables
A single view based on a predefined view orientation. ---------CORRECT
ANSWER-----------------Model View
