Update) Questions and Verified Answers
100% Correct {Grade A}
When handling and storing a freight platform, what do you need to keep in mind? -
correct answer With the platform on edge, handle it from the ends and move on
rollers.
Which of the following statements is true concerning capstans? -correct answer Both
b, and c.
b. Fasten the hoist to a beam or other building structure.
c. To interrupt hoisting ease off on the pulling rope
When choosing planks for hoisting, what must be considered? -correct answer Use
only scaffold grade lumber
The distance between the counterweight buffer strike plate and the striking surface
of the counterweight buffer when the car floor is level with the top terminal landing
is known as -correct answer Runby
What type of wrench is used to align the holes for rail installation? -correct answer
Spud Wrench
Which of the following wrenches is used to thread pipes with polished surfaces
together? -correct answer Strap Wrench
, NEIEP 200 Final Review (Latest
Update) Questions and Verified Answers
100% Correct {Grade A}
Which of the following statements applies to the use of a hacksaw on the job? -
correct answer Hacksaw blades must be installed with the teeth facing forward.
The operation of the down final limit switch will prevent movement of the car by
normal operating devices in ... -correct answer both directions of travel
Which of the following statements is correct regarding ladders? -correct answer
Metal ladders should never be used
What safety precaution is most important when using rollers to move heavy
equipment? -correct answer Pipe rollers must be picked up by the hollow inner pan
What are two things a compound mitre saw does best at the same time? -correct
answer Bevel and mitre cuts can be made at the same time.
When the pit down final limit switch is actuated, the car... -correct answer Will not run
at all
Why do we use laminated glass in the walls of glass elevator cabs? -correct answer If
the glass cracks the plastic interlayer holds the fragments.