WATCHGUARD NETWORK SECURITY
ESSENTIALS EXAM WITH VERIFIED
QUESTIONS AND ANSWERS|| GUARANTEED
PASS|| ALREADY GRADED A+|| LATEST
VERSION 2025
Set the Dynamic NAT Source IP Address in a Network Dynamic NAT rule If
you want to set the source IP address for traffic that matches a dynamic NAT
rule, regardless of any policies that apply to the traffic, select Network > NAT,
and add a network dynamic NAT rule that specifies the source IP address. The
source IP address you specify must be on the same subnet as the primary or
secondary IP address of the interface the traffic leaves. (Page 123 - Fireware
Essentials Student Guide)
A. Match each type of NAT with the correct description:
B. Conserves IP addresses and hides the internal topology of your network.
(Choose one)
C. 1-to1 NAT
D. Dynamic NAT
E. NAT Loopback - ANSWER- Dynamic NAT is also known as IP
masquerading. With dynamic NAT many D. Dynamic NAT
computers can connect to the Internet from one public IP address. Dynamic
NAT gives more security for internal hosts that use the Internet, because it hides
the IP addresses of hosts on your network.
Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-
US/index.html#en-
US/nat/nat_dynamic_use_c.html%3FTocPath%3DNetwork%2520Address%
,2520Translation%2520(NAT)%7CAbout%2520Dynamic%2520NAT%7C____
_0
If your Firebox has a single public IP address, and you want to forward inbound
traffic to internal hosts based on the destination port, which type of NAT should
you use? (Select one.)
A. Static NAT
B. 1-to-1 NAT
C. Dynamic NAT - ANSWER-A. Static NAT
You need to create an HTTP-proxy policy to a specific domain for software
updates (example.com). The update site has multiple subdomains and dynamic
IP addresses on a content delivery network. Which of these options is the best
way to define the destination in your HTTP-proxy policy? (Select one.)
A. Configure a host name for update.example.com
B. Configure an FQDN for *.example.com
C. Add IP addresses that correspond to each software update server in the
domain.
D. Create an alias for all subdomains and known IP addresses for example.com.
- ANSWER-B. Configure an FQDN for *.example.com
While troubleshooting a branch office VPN tunnel, you see this log message:
2014-07-23 12:29:15 iked (203.0.113.10<->203.0.113.20) Peer proposes phase
one encryption 3DES, expecting AES
Which of the following components are from WG System Manager(3)
A. Router
B. Log Viewer
,C. Policy Manager
D. Appliance Monitor
E. Windows NT server
F. Management Computer
G. Report Server - ANSWER-B. LogViewer
C. Policy Manager
G. Report Server
What are the three components of the WG System Manager software
A. Policy Manager, HostWatch, Dimension
B. Policy Manager, Firebox System Manager(FSM), Management Server
C. Policy Manager, Report Server, Management Server
D. Policy Manager, Firebox System Manager (FSM), HostWatch - ANSWER-
D. Policy Manager, Firebox System Manager (FSM), HostWatch
In order to review the traffic that passes over your HTTP policy, what do you
need to make sure to do first?
A. Turn on logging inside of WebBlocker
B. No Change needs to be made. All policies log by default
C. Turn up Diagnostic Logging under the Setup > Logging menu
D. Turn on Logging in the HTTP policy. - ANSWER-D. Turn on Logging in
the HTTP policy
When implementing Authentication, which service can you utilize? Pick all that
apply.
A. LDAPS
B. Active Directory
, C. Firebox Database
D. Office 365 Single-Sign-On - ANSWER-A. LDAPS
B. Active Directory
C. Firebox Database
Which policies can use the Intrusion Prevention Service to block network
attacks? (Select one?)
A. Only HTTP and HTTPS Proxy policies
B. Only proxy policies
C. All Policies
D. Only packet filter policies
E. Only inbound policies - ANSWER-C. All policies
Which of these services would you use to allow the use of P2P programs for a
specific department in your organization? (Select one.)
A. Reputation Enabled Defense
B. Application Control
C. Data Loss Prevention
D. IPS - ANSWER-B. Application Control
You can use Firebox System Manager to download a PCAP file that includes
packet information about the protocols that manage traffic on your network.
A. True
B. False - ANSWER-A. True
From the Firebox System Manager >Authentication List tab, you can view all of
the authenticated users connected to your Firebox and disconnect any of them.
A. True
ESSENTIALS EXAM WITH VERIFIED
QUESTIONS AND ANSWERS|| GUARANTEED
PASS|| ALREADY GRADED A+|| LATEST
VERSION 2025
Set the Dynamic NAT Source IP Address in a Network Dynamic NAT rule If
you want to set the source IP address for traffic that matches a dynamic NAT
rule, regardless of any policies that apply to the traffic, select Network > NAT,
and add a network dynamic NAT rule that specifies the source IP address. The
source IP address you specify must be on the same subnet as the primary or
secondary IP address of the interface the traffic leaves. (Page 123 - Fireware
Essentials Student Guide)
A. Match each type of NAT with the correct description:
B. Conserves IP addresses and hides the internal topology of your network.
(Choose one)
C. 1-to1 NAT
D. Dynamic NAT
E. NAT Loopback - ANSWER- Dynamic NAT is also known as IP
masquerading. With dynamic NAT many D. Dynamic NAT
computers can connect to the Internet from one public IP address. Dynamic
NAT gives more security for internal hosts that use the Internet, because it hides
the IP addresses of hosts on your network.
Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-
US/index.html#en-
US/nat/nat_dynamic_use_c.html%3FTocPath%3DNetwork%2520Address%
,2520Translation%2520(NAT)%7CAbout%2520Dynamic%2520NAT%7C____
_0
If your Firebox has a single public IP address, and you want to forward inbound
traffic to internal hosts based on the destination port, which type of NAT should
you use? (Select one.)
A. Static NAT
B. 1-to-1 NAT
C. Dynamic NAT - ANSWER-A. Static NAT
You need to create an HTTP-proxy policy to a specific domain for software
updates (example.com). The update site has multiple subdomains and dynamic
IP addresses on a content delivery network. Which of these options is the best
way to define the destination in your HTTP-proxy policy? (Select one.)
A. Configure a host name for update.example.com
B. Configure an FQDN for *.example.com
C. Add IP addresses that correspond to each software update server in the
domain.
D. Create an alias for all subdomains and known IP addresses for example.com.
- ANSWER-B. Configure an FQDN for *.example.com
While troubleshooting a branch office VPN tunnel, you see this log message:
2014-07-23 12:29:15 iked (203.0.113.10<->203.0.113.20) Peer proposes phase
one encryption 3DES, expecting AES
Which of the following components are from WG System Manager(3)
A. Router
B. Log Viewer
,C. Policy Manager
D. Appliance Monitor
E. Windows NT server
F. Management Computer
G. Report Server - ANSWER-B. LogViewer
C. Policy Manager
G. Report Server
What are the three components of the WG System Manager software
A. Policy Manager, HostWatch, Dimension
B. Policy Manager, Firebox System Manager(FSM), Management Server
C. Policy Manager, Report Server, Management Server
D. Policy Manager, Firebox System Manager (FSM), HostWatch - ANSWER-
D. Policy Manager, Firebox System Manager (FSM), HostWatch
In order to review the traffic that passes over your HTTP policy, what do you
need to make sure to do first?
A. Turn on logging inside of WebBlocker
B. No Change needs to be made. All policies log by default
C. Turn up Diagnostic Logging under the Setup > Logging menu
D. Turn on Logging in the HTTP policy. - ANSWER-D. Turn on Logging in
the HTTP policy
When implementing Authentication, which service can you utilize? Pick all that
apply.
A. LDAPS
B. Active Directory
, C. Firebox Database
D. Office 365 Single-Sign-On - ANSWER-A. LDAPS
B. Active Directory
C. Firebox Database
Which policies can use the Intrusion Prevention Service to block network
attacks? (Select one?)
A. Only HTTP and HTTPS Proxy policies
B. Only proxy policies
C. All Policies
D. Only packet filter policies
E. Only inbound policies - ANSWER-C. All policies
Which of these services would you use to allow the use of P2P programs for a
specific department in your organization? (Select one.)
A. Reputation Enabled Defense
B. Application Control
C. Data Loss Prevention
D. IPS - ANSWER-B. Application Control
You can use Firebox System Manager to download a PCAP file that includes
packet information about the protocols that manage traffic on your network.
A. True
B. False - ANSWER-A. True
From the Firebox System Manager >Authentication List tab, you can view all of
the authenticated users connected to your Firebox and disconnect any of them.
A. True
