FDNY F-95 Smoke Detector Testing Technician
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1.
What is the primary purpose of a smoke detector testing technician?
A. Install new smoke detectors
B. Maintain fire extinguishers
C. Test, inspect, and clean smoke detectors
D. Conduct fire drills
Answer: C
The F95 certificate allows technicians to test, inspect, and clean smoke
detectors, not install them.
2.
How often must smoke detectors in commercial buildings typically be
tested?
A. Monthly
B. Weekly
C. Annually
D. Every other year
Answer: C
,Annual testing is the standard requirement for smoke detection systems
unless otherwise specified.
3.
What document must a smoke detector technician always carry while
performing duties?
A. SDS sheets
B. F-95 Certificate of Fitness
C. Fire alarm plans
D. Contractor license
Answer: B
FDNY requires technicians to carry their valid Certificate of Fitness on
site.
4.
Which of the following is required to verify proper sensitivity of smoke
detectors?
A. Magnet
B. Heat gun
C. Approved aerosol smoke test
D. Flashlight
Answer: C
Only approved aerosol smoke simulants can verify detector response.
5.
,Which authority enforces fire safety regulations in New York City?
A. OEM
B. NYPD
C. OSHA
D. FDNY
Answer: D
FDNY enforces NYC Fire Code and inspection rules.
6.
What type of smoke detector uses a light beam and photoelectric
sensor?
A. Ionization
B. Photoelectric
C. Heat detector
D. CO detector
Answer: B
Photoelectric detectors use light-scattering technology.
7.
What condition may cause false alarms in ionization detectors?
A. Dust
B. Radio waves
C. Low humidity
D. Excessive sunlight
Answer: A
, Dust can interfere with the ionization chamber and trigger unwanted
alarms.
8.
What is required after testing smoke detection systems?
A. Remove the detectors
B. Reset the fire alarm control panel
C. Disable building elevators
D. Perform evacuation drills
Answer: B
Technicians must reset the system after testing is complete.
9.
Who should be notified before beginning smoke detector testing?
A. USPS
B. Central station monitoring company
C. Insurance provider
D. Building residents only
Answer: B
Central stations must be notified to avoid dispatching false alarms.
10.
What must be documented after smoke detector testing?
A. The name of the building architect
B. Test results and detector locations
Exam Questions And Correct Answers (Verified
Answers) Plus Rationales 2026 Q&A | Instant
Download Pdf
1.
What is the primary purpose of a smoke detector testing technician?
A. Install new smoke detectors
B. Maintain fire extinguishers
C. Test, inspect, and clean smoke detectors
D. Conduct fire drills
Answer: C
The F95 certificate allows technicians to test, inspect, and clean smoke
detectors, not install them.
2.
How often must smoke detectors in commercial buildings typically be
tested?
A. Monthly
B. Weekly
C. Annually
D. Every other year
Answer: C
,Annual testing is the standard requirement for smoke detection systems
unless otherwise specified.
3.
What document must a smoke detector technician always carry while
performing duties?
A. SDS sheets
B. F-95 Certificate of Fitness
C. Fire alarm plans
D. Contractor license
Answer: B
FDNY requires technicians to carry their valid Certificate of Fitness on
site.
4.
Which of the following is required to verify proper sensitivity of smoke
detectors?
A. Magnet
B. Heat gun
C. Approved aerosol smoke test
D. Flashlight
Answer: C
Only approved aerosol smoke simulants can verify detector response.
5.
,Which authority enforces fire safety regulations in New York City?
A. OEM
B. NYPD
C. OSHA
D. FDNY
Answer: D
FDNY enforces NYC Fire Code and inspection rules.
6.
What type of smoke detector uses a light beam and photoelectric
sensor?
A. Ionization
B. Photoelectric
C. Heat detector
D. CO detector
Answer: B
Photoelectric detectors use light-scattering technology.
7.
What condition may cause false alarms in ionization detectors?
A. Dust
B. Radio waves
C. Low humidity
D. Excessive sunlight
Answer: A
, Dust can interfere with the ionization chamber and trigger unwanted
alarms.
8.
What is required after testing smoke detection systems?
A. Remove the detectors
B. Reset the fire alarm control panel
C. Disable building elevators
D. Perform evacuation drills
Answer: B
Technicians must reset the system after testing is complete.
9.
Who should be notified before beginning smoke detector testing?
A. USPS
B. Central station monitoring company
C. Insurance provider
D. Building residents only
Answer: B
Central stations must be notified to avoid dispatching false alarms.
10.
What must be documented after smoke detector testing?
A. The name of the building architect
B. Test results and detector locations
