CM 2215 COSS EXAM QUESTIONS &
ANSWERS | 100% VERIFIED SOLUTIONS
|QUESTIONS WITH CORRECT ANSWERS
2026 LATEST UPDATE!!
what are the 3 specialized fall protection systems? - CORRECT
ANSWER ✔✔- 1. hole covers
2. personal fall restraint systems
3. controlled access zones and warning lines
the 3 parts of an OSHA inspection are: - CORRECT ANSWER ✔✔- 1.
opening conference
2. a worksite "walk around"
3. closing conference
only _____ companies may have focused OSHA inspections -
CORRECT ANSWER ✔✔- construction
when the OSHA CSHO arrives at a site to conduct a _____ _____ , they
will determine:
- whether there is a project coordination by GC
,- review the projects safety and health program/plan for adequacy and
the project S&H program/plan meets the requirements of 29 CFR 1926
subpart c
- determine if there is a competent person - CORRECT ANSWER ✔✔-
focused inspection
if the CSHO does not find that a company qualifies for a focused
inspection, the will receive a _____ inspection - CORRECT ANSWER
✔✔- comprehensive
The purpose of an OSHA compliance directive (CPL) is to: - CORRECT
ANSWER ✔✔- insure consistent enforcement of OSHA regulations.
the 4 types and definitions of employers in a multi-employer situation
are: - CORRECT ANSWER ✔✔- 1. creating employer
2. exposing employer
3. correcting employer
4. controlling employer
For an employer to provide a _________________________ in a multi-
employer situation, the employer must show the following:
- the employer did not cause the hazard to exist
- The employer did not directly control conditions causing the hazard
- The employer has taken reasonable steps to notify the party(s) charged
with cause and control of the problem
, - The employer has taken reasonable steps to keep employees away from
hazard - CORRECT ANSWER ✔✔- defense against a citation
the 4 modes of entry for most hazards are: - CORRECT ANSWER ✔✔-
1. inhalation
2. ingestion
3. absorption
4. injection
Dusts, fumes, & mists are measured in: - CORRECT ANSWER ✔✔-
weight per unit of volume (mg/m^3).
Gasses and Vapors are measured in: - CORRECT ANSWER ✔✔-
containment per volume of air sampled (ppm).
PEL stands for: - CORRECT ANSWER ✔✔- Permissible Exposure
Limits
TLV stands for: - CORRECT ANSWER ✔✔- Threshold Limit Value.
A TLV-TWA is a _________________ and lasts for
______________________ - CORRECT ANSWER ✔✔- Time
Weighted Average
ANSWERS | 100% VERIFIED SOLUTIONS
|QUESTIONS WITH CORRECT ANSWERS
2026 LATEST UPDATE!!
what are the 3 specialized fall protection systems? - CORRECT
ANSWER ✔✔- 1. hole covers
2. personal fall restraint systems
3. controlled access zones and warning lines
the 3 parts of an OSHA inspection are: - CORRECT ANSWER ✔✔- 1.
opening conference
2. a worksite "walk around"
3. closing conference
only _____ companies may have focused OSHA inspections -
CORRECT ANSWER ✔✔- construction
when the OSHA CSHO arrives at a site to conduct a _____ _____ , they
will determine:
- whether there is a project coordination by GC
,- review the projects safety and health program/plan for adequacy and
the project S&H program/plan meets the requirements of 29 CFR 1926
subpart c
- determine if there is a competent person - CORRECT ANSWER ✔✔-
focused inspection
if the CSHO does not find that a company qualifies for a focused
inspection, the will receive a _____ inspection - CORRECT ANSWER
✔✔- comprehensive
The purpose of an OSHA compliance directive (CPL) is to: - CORRECT
ANSWER ✔✔- insure consistent enforcement of OSHA regulations.
the 4 types and definitions of employers in a multi-employer situation
are: - CORRECT ANSWER ✔✔- 1. creating employer
2. exposing employer
3. correcting employer
4. controlling employer
For an employer to provide a _________________________ in a multi-
employer situation, the employer must show the following:
- the employer did not cause the hazard to exist
- The employer did not directly control conditions causing the hazard
- The employer has taken reasonable steps to notify the party(s) charged
with cause and control of the problem
, - The employer has taken reasonable steps to keep employees away from
hazard - CORRECT ANSWER ✔✔- defense against a citation
the 4 modes of entry for most hazards are: - CORRECT ANSWER ✔✔-
1. inhalation
2. ingestion
3. absorption
4. injection
Dusts, fumes, & mists are measured in: - CORRECT ANSWER ✔✔-
weight per unit of volume (mg/m^3).
Gasses and Vapors are measured in: - CORRECT ANSWER ✔✔-
containment per volume of air sampled (ppm).
PEL stands for: - CORRECT ANSWER ✔✔- Permissible Exposure
Limits
TLV stands for: - CORRECT ANSWER ✔✔- Threshold Limit Value.
A TLV-TWA is a _________________ and lasts for
______________________ - CORRECT ANSWER ✔✔- Time
Weighted Average
