C-39 Roofing Trade Practice Test 3 with all Correct &
100% Verified Answers| Latest Version| Already
Graded A+
The lower exposed edge of a wood shingle is called the: ✔Correct Answers--Shingle butt
The distance that adjacent shingles overlap each other horizontally is called the: ✔Correct
Answers--Sidelap
The distance between exposed edges of overlapping shingles is called the: ✔Correct Answers--
Exposure
The distance from the lower edge of a top shingle to the upper edge of the shingle in the course
immediately below it is called: ✔Correct Answers--Toplap
The distance from the lower edge of a top shingle to the upper edge of the shingle two courses
below it is called: ✔Correct Answers--Headlap
What is a seal cap? ✔Correct Answers--The mortar cap around the top of a chimney
A hip roof slopes in _______ direction(s). ✔Correct Answers--4
A gable roof slopes in _______ direction(s). ✔Correct Answers--2
A mansard roof slopes in _______ direction(s). ✔Correct Answers--4
A gambrel roof slopes in _______ direction(s). ✔Correct Answers--2
A shed roof slopes in _______ direction(s). ✔Correct Answers--1
What type of roof has the most plies? ✔Correct Answers--Flat
Which of the following is a "dead load" on a roof? ✔Correct Answers--Structural membranes and
other fixed loads
Which of the following is a "live load" on a roof? ✔Correct Answers--Roofers and other personnel
Where asphalt is used, rock is not practical on roofs with a slope greater than: ✔Correct Answers--
3:12
Ordinary roof coverings may be applied over foam plastic when the foam is separated from the
interior of the building by plywood sheathing at least _______ thick. ✔Correct Answers--1/2"
When starting a new roof, what would you do first? ✔Correct Answers--Check for nailing
When installing a ring-clamp drain on an insulated roof, how do you cut the insulation? ✔Correct
Answers--Taper the insulation back at least 18"
100% Verified Answers| Latest Version| Already
Graded A+
The lower exposed edge of a wood shingle is called the: ✔Correct Answers--Shingle butt
The distance that adjacent shingles overlap each other horizontally is called the: ✔Correct
Answers--Sidelap
The distance between exposed edges of overlapping shingles is called the: ✔Correct Answers--
Exposure
The distance from the lower edge of a top shingle to the upper edge of the shingle in the course
immediately below it is called: ✔Correct Answers--Toplap
The distance from the lower edge of a top shingle to the upper edge of the shingle two courses
below it is called: ✔Correct Answers--Headlap
What is a seal cap? ✔Correct Answers--The mortar cap around the top of a chimney
A hip roof slopes in _______ direction(s). ✔Correct Answers--4
A gable roof slopes in _______ direction(s). ✔Correct Answers--2
A mansard roof slopes in _______ direction(s). ✔Correct Answers--4
A gambrel roof slopes in _______ direction(s). ✔Correct Answers--2
A shed roof slopes in _______ direction(s). ✔Correct Answers--1
What type of roof has the most plies? ✔Correct Answers--Flat
Which of the following is a "dead load" on a roof? ✔Correct Answers--Structural membranes and
other fixed loads
Which of the following is a "live load" on a roof? ✔Correct Answers--Roofers and other personnel
Where asphalt is used, rock is not practical on roofs with a slope greater than: ✔Correct Answers--
3:12
Ordinary roof coverings may be applied over foam plastic when the foam is separated from the
interior of the building by plywood sheathing at least _______ thick. ✔Correct Answers--1/2"
When starting a new roof, what would you do first? ✔Correct Answers--Check for nailing
When installing a ring-clamp drain on an insulated roof, how do you cut the insulation? ✔Correct
Answers--Taper the insulation back at least 18"
