Millwright cfq part 2 Exam Questions
and Answers 100% score Latest
update 2026
81. A disadvantage of hoses in hydraulic lines is that they? -
correct answer ✅Wear from flexing
58. Which pump has a mechanical aid to stop leak on start up?
Flexiblevane pump, lobe pump, screw pump? -
correct answer ✅None of them
59. On a mechanical seal which part do you not touch? -
correct answer ✅Mating face
60. You have to do a welding job inside a confined space, how do
you provide fresh air? -
correct answer ✅Use ducks to rig fresh air blowing into the far end
of the space
61. What does a plow scraper do to the underside of the belt? -
correct answer ✅Ensures the underside of the belt stay debris free
62. What is the proper method of storage for a micrometer? -
correct answer ✅Back in the case with a light coat of oil
, Millwright cfq part 2 Exam Questions
and Answers 100% score Latest
update 2026
63. How long of a strap is required to wrap around a 24 inch drum
having a 1.5 inch overlap? -
correct answer ✅76.86
64. When welding on a shaft where is the best spot for the ground?
-
correct answer ✅As close to the area as possible without passing
through bearings
65. What dictated the least amount of winding remaining on a
drum? -
correct answer ✅Lower limit switch
66. To install a tapered bearing in the middle of the shaft you need?
-
correct answer ✅withdrawal sleeve
67. Which line would you run a "J" ruler off of? -
correct answer ✅Datum line
and Answers 100% score Latest
update 2026
81. A disadvantage of hoses in hydraulic lines is that they? -
correct answer ✅Wear from flexing
58. Which pump has a mechanical aid to stop leak on start up?
Flexiblevane pump, lobe pump, screw pump? -
correct answer ✅None of them
59. On a mechanical seal which part do you not touch? -
correct answer ✅Mating face
60. You have to do a welding job inside a confined space, how do
you provide fresh air? -
correct answer ✅Use ducks to rig fresh air blowing into the far end
of the space
61. What does a plow scraper do to the underside of the belt? -
correct answer ✅Ensures the underside of the belt stay debris free
62. What is the proper method of storage for a micrometer? -
correct answer ✅Back in the case with a light coat of oil
, Millwright cfq part 2 Exam Questions
and Answers 100% score Latest
update 2026
63. How long of a strap is required to wrap around a 24 inch drum
having a 1.5 inch overlap? -
correct answer ✅76.86
64. When welding on a shaft where is the best spot for the ground?
-
correct answer ✅As close to the area as possible without passing
through bearings
65. What dictated the least amount of winding remaining on a
drum? -
correct answer ✅Lower limit switch
66. To install a tapered bearing in the middle of the shaft you need?
-
correct answer ✅withdrawal sleeve
67. Which line would you run a "J" ruler off of? -
correct answer ✅Datum line
