CWB Level 1 EXAM STUDY GUIDE 2026 COMPLETE QUESTIONS WITH CORRECT DETAILED ANSWERS || 100% GUARANTEED PASS <RECENT VERSION>

CWB Level 1 EXAM STUDY GUIDE 2026 COMPLETE QUESTIONS WITH CORRECT DETAILED ANSWERS || 100% GUARANTEED PASS &lt;RECENT VERSION&gt; 1. CWB Level 1 certification - ANSWER Certification focusing on welding inspection and quality control 2. CWB Level 1 certified inspector - ANSWER Responsibility: Conducting visual inspections of welded joints 3. D1.1 - ANSWER Code for the inspection of structural steel 4. CWB Welder Qualification Test - ANSWER Assessment of a welder's ability to perform specific welding tasks 5. CWB Level 1 certified inspector renewal - ANSWER Required every 5 years When material is received, it should be inspected to verify its condition. This includes: (Multiple choice) Question 1 options:A) Application requirements.B) Reviewing invoice cost.C) Paint coverage.D) Weathering. - ANSWER D) Weathering. 6. What is a mill test report? (Multiple choice) Question 2 options:A) The receipt for the purchased material.B) A document of detailed chemical and mechanical tests, heat treatment, and material inspection.C) A document showing the cost and delivery method of the material.D) Documentation showing the certifications of the plant that produced the material. - ANSWER B) A document of detailed chemical and mechanical tests, heat treatment, and material inspection. 7. Suppliers should provide a label that shows the certification status of electrodes. (True/False) - ANSWER True 8. What type of inspection is used to verify material conformance to a material specification when traceability is lost? (Multiple choice) Question 4 options:A) PMIB) RTC) UTD) MPI - ANSWER A) PMI 9. In a non-conformance program, what colour is used to indicate a product hold? (Multiple choice) Question 5 options:A) YellowB) RedC) GreenD) Blue - ANSWER A) Yellow 10. Which organization certifies welding electrodes to CSA W48? (Multiple choice) Question 6 options:A) The local government.B) Consumable manufacturers.C) The Canadian Welding Bureau.D) The Canadian Standards Association. - ANSWER C) The Canadian Welding Bureau. 11. In Canada, who regulates the construction of pressurized systems? (Multiple choice) 12. Question 7 options:A) The compliance agency.B) ABSA.C) The jurisdictional authority.D) The federal government. - ANSWER C) The jurisdictional authority. 13. For how long is an AWS welder qualification valid? (Multiple choice) Question 8 options:A) Two years.B) Five years.C) Indefinitely.D) Only for the length of project. - ANSWER C) Indefinitely. 14. In what positions is a class V welder permitted to weld under CSA W47.1? (Multiple choice) Question 9 options:A) Vertical position only.B) Vertical and flat positions.C) Vertical, flat, and horizontal positions.D) Vertical and overhead positions. - ANSWER C) Vertical, flat, and horizontal positions. 15. MCAW uses a ________ push (forehand) technique for optimal bead shape and appearance. (Multiple choice) Question 1 options: A) 10° to 20° B) 20° to 30° C) 5° to 15° D) 15° to 30° - ANSWER A) 10° to 20° 16. In MCAW, the burning of the wire is______________due to the deoxidizers and arc stabilizers added to the flux. (Multiple choice) Question 2 options:A) faster and higher in deposition rates.B) unstable and undesirable.C) hotter and unpredictable.D) cleaner and more stable. - ANSWER D) cleaner and more stable. 17. MCAW is primarily used for production welding of low-carbon steel. (True/False) - ANSWER True 18. The function of the ingredients in the electrode coating of SMAW electrodes is to: (Multiple choice) Question 4 options:A) provide a gas shield, slag covering, arc stabilization, and add additional alloying elements.B) react with the base metal to assist in the weld fusion.C) remove rust, mill scale, and other contaminants from the surface of the joint.D) counteract the effects of arc blow. - ANSWER A) provide a gas shield, slag covering, arc stabilization, and add additional alloying elements. 19. Which of the following does the welder manipulate when using the SMAW processes? (Multiple choice) Question 5 options:A) The temperature of the arc, the gas mixture, and the size of flux granules.B) The current setting, the speed of travel, the arc length, and the electrode angle.C) The current setting, the temperature of the arc, the arc length, and the electrode angleD) The voltage setting, the speed of travel, the arc length, and the electrode angle. - ANSWER B) The current setting, the speed of travel, the arc length, and the electrode angle. 20. How many times may low-hydrogen SMAW electrodes be rebaked? (Multiple choice) Question 6 options:A) One time.B) Two times.C) Three times.D) Four times. - ANSWER A) One time. 21. The components of the SMAW system are: (Multiple choice) Question 7 options:A) CV power supply, welding gun, ground cable, and external shielding gas.B) CV power supply, welding gun, and ground cable.C) CC power supply, electrode holder, and ground cable.D) CC power supply, electrode holder, ground cable, and external shielding gas. - ANSWER C) CC power supply, electrode holder, and ground cable. 22. What do the first two digits of a shielded metal arc welding electrode classification indicate? (Multiple choice) 23. Question 8 options:A) The weld deposit strength.B) The deposition rate of the electrode.C) The yield strength of the electrode.D) The type of electrode coating. - ANSWER A) The weld deposit strength.