BICSI PRACTICE TEST-RETAKE QUESTIONS
WITH CORRECT ANSWERS 2025
The 2 main considerations concerning the existing cabling are? - CORRECT ANSWER -
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-
connects are relocated one pair after another until completed is called a - CORRECT ANSWER -
rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space? -
CORRECT ANSWER -Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of li
ght? - CORRECT ANSWER -Fiber strand identifier 11-11
A provides a quick graphical representation of how the circuit is layed out? -
CORRECT ANSWER -CLR 11-27
A uses several pluggable modules to locate and Identify cables. - CORRECT ANSWER -
Office locator kit
A injects light (at a proper wavelength) and measures the results t the other end. -
CORRECT ANSWER -Light source and power meter
A detects the presence of light within a fiber strand - CORRECT ANSWER -
Fiber strand identifier
, A uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
CORRECT ANSWER -Visual fault locator
A will leave the customer momentarily without communications -
CORRECT ANSWER -Hot-cut 11-28
During a , cross-connects are relocated one pair after another until completed. -
CORRECT ANSWER -Rolling cut
* is a property of an electromagnetic field built around a conductor that opposes an
y changes in current flow in a circuit. - CORRECT ANSWER -Inductance
is a property of conductors that allows storage of electrical charges when poten
tial differences (voltages) exist between the conductors. - CORRECT ANSWER -Capacitance
*In AC circuits, the total opposition to current flow is called , which is measured in o
hms. - CORRECT ANSWER -Impedance
The nominal characteristic impedance of balanced twisted pair cable is ohms at 100
MHz - CORRECT ANSWER -100
Pair 626 would be in the Super Binder - CORRECT ANSWER -Red
Series _______ s the preferred choice for longer runs - CORRECT ANSWER -11
The connector/s have center pins (choose all that apply) - CORRECT ANSWER -N
BNC
WITH CORRECT ANSWERS 2025
The 2 main considerations concerning the existing cabling are? - CORRECT ANSWER -
Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-
connects are relocated one pair after another until completed is called a - CORRECT ANSWER -
rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space? -
CORRECT ANSWER -Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of li
ght? - CORRECT ANSWER -Fiber strand identifier 11-11
A provides a quick graphical representation of how the circuit is layed out? -
CORRECT ANSWER -CLR 11-27
A uses several pluggable modules to locate and Identify cables. - CORRECT ANSWER -
Office locator kit
A injects light (at a proper wavelength) and measures the results t the other end. -
CORRECT ANSWER -Light source and power meter
A detects the presence of light within a fiber strand - CORRECT ANSWER -
Fiber strand identifier
, A uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
CORRECT ANSWER -Visual fault locator
A will leave the customer momentarily without communications -
CORRECT ANSWER -Hot-cut 11-28
During a , cross-connects are relocated one pair after another until completed. -
CORRECT ANSWER -Rolling cut
* is a property of an electromagnetic field built around a conductor that opposes an
y changes in current flow in a circuit. - CORRECT ANSWER -Inductance
is a property of conductors that allows storage of electrical charges when poten
tial differences (voltages) exist between the conductors. - CORRECT ANSWER -Capacitance
*In AC circuits, the total opposition to current flow is called , which is measured in o
hms. - CORRECT ANSWER -Impedance
The nominal characteristic impedance of balanced twisted pair cable is ohms at 100
MHz - CORRECT ANSWER -100
Pair 626 would be in the Super Binder - CORRECT ANSWER -Red
Series _______ s the preferred choice for longer runs - CORRECT ANSWER -11
The connector/s have center pins (choose all that apply) - CORRECT ANSWER -N
BNC
