TEXAS RAIL SAFETY INSPECTOR LICENSING EXAM
PRACTICE QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A
THIS DOCUMENT CONTAINS :
TEXAS RAIL SAFETY INSPECTOR LICENSING EXAM
PRACTICE QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS)
RATIONALES 2026 Q&A
CONTENT DESIGNED TO MIRROR THE OFFICIAL TEXAS RAIL SAFETY
INSPECTOR LICENSING EXAM
EACH QUESTION INCLUDES RATIONALES AND KEY REFERENCES TO
REINFORCE UNDERSTANDING
https://www.stuvia.com/en-us/user/MBoffin
, TEXAS RAIL SAFETY INSPECTOR LICENSING EXAM
1. Which federal agency primarily oversees railroad safety regulations in the
United States?
A. Federal Aviation Administration (FAA)
B. Federal Railroad Administration (FRA)
C. Department of Transportation (DOT)
D. National Transportation Safety Board (NTSB)
The FRA regulates railroad safety, enforcing standards under the U.S. Department
of Transportation.
2. What is the main purpose of a rail safety inspection?
A. To repair defective rail cars
B. To ensure compliance with federal and state safety standards
C. To operate locomotives during service
D. To manage rail freight operations
Inspections verify compliance with established safety standards and regulations.
3. In Texas, which state agency collaborates with the FRA to enforce rail safety
regulations?
A. Texas Department of Licensing and Regulation
B. Texas Highway Patrol
C. Texas Department of Transportation (TxDOT)
D. Texas Public Utility Commission
https://www.stuvia.com/en-us/user/MBoffin
, TxDOT works with the FRA to oversee railroad safety and infrastructure within the
state.
4. What document must a rail safety inspector reference when assessing track
safety standards?
A. OSHA Code of Practice
B. AAR Freight Rules
C. FRA Track Safety Standards (49 CFR Part 213)
D. EPA Rail Environmental Guide
49 CFR Part 213 defines the federal standards for track inspection and
maintenance.
5. What is the maximum allowable deviation in track gauge for standard gauge
track?
A. 4 feet, 6 inches
B. 4 feet, 9 inches
C. 4 feet, 8½ inches ± ¼ inch
D. 5 feet
Standard track gauge is 56.5 inches; small deviations are allowed by FRA
standards.
6. What type of defect requires immediate action under FRA track safety
standards?
A. Minor ballast cracks
B. Broken rail
C. Vegetation overgrowth
D. Surface unevenness
A broken rail poses a high risk of derailment and requires immediate repair.
https://www.stuvia.com/en-us/user/MBoffin
PRACTICE QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) PLUS RATIONALES 2026 Q&A
THIS DOCUMENT CONTAINS :
TEXAS RAIL SAFETY INSPECTOR LICENSING EXAM
PRACTICE QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS)
RATIONALES 2026 Q&A
CONTENT DESIGNED TO MIRROR THE OFFICIAL TEXAS RAIL SAFETY
INSPECTOR LICENSING EXAM
EACH QUESTION INCLUDES RATIONALES AND KEY REFERENCES TO
REINFORCE UNDERSTANDING
https://www.stuvia.com/en-us/user/MBoffin
, TEXAS RAIL SAFETY INSPECTOR LICENSING EXAM
1. Which federal agency primarily oversees railroad safety regulations in the
United States?
A. Federal Aviation Administration (FAA)
B. Federal Railroad Administration (FRA)
C. Department of Transportation (DOT)
D. National Transportation Safety Board (NTSB)
The FRA regulates railroad safety, enforcing standards under the U.S. Department
of Transportation.
2. What is the main purpose of a rail safety inspection?
A. To repair defective rail cars
B. To ensure compliance with federal and state safety standards
C. To operate locomotives during service
D. To manage rail freight operations
Inspections verify compliance with established safety standards and regulations.
3. In Texas, which state agency collaborates with the FRA to enforce rail safety
regulations?
A. Texas Department of Licensing and Regulation
B. Texas Highway Patrol
C. Texas Department of Transportation (TxDOT)
D. Texas Public Utility Commission
https://www.stuvia.com/en-us/user/MBoffin
, TxDOT works with the FRA to oversee railroad safety and infrastructure within the
state.
4. What document must a rail safety inspector reference when assessing track
safety standards?
A. OSHA Code of Practice
B. AAR Freight Rules
C. FRA Track Safety Standards (49 CFR Part 213)
D. EPA Rail Environmental Guide
49 CFR Part 213 defines the federal standards for track inspection and
maintenance.
5. What is the maximum allowable deviation in track gauge for standard gauge
track?
A. 4 feet, 6 inches
B. 4 feet, 9 inches
C. 4 feet, 8½ inches ± ¼ inch
D. 5 feet
Standard track gauge is 56.5 inches; small deviations are allowed by FRA
standards.
6. What type of defect requires immediate action under FRA track safety
standards?
A. Minor ballast cracks
B. Broken rail
C. Vegetation overgrowth
D. Surface unevenness
A broken rail poses a high risk of derailment and requires immediate repair.
https://www.stuvia.com/en-us/user/MBoffin
