RVTI LEVEL 1 CERTIFICATION EXAMINATION
TEST 2026 QUESTIONS AND SOLUTIONS
100% CORRECT
◍ When inspecting the parking brake, make sure there is no ______
creep - Forward
◍ A technician is testing a motorized RV. The first step enacted is
ensuring that the seat moves up, down, forward, and back. Identify the
next main steps for the technician to perform. - Adjust swayback, test
seat heaters, inspect armrest
◍ The engine must run for a few minutes for this to work properly -
Heat and cool modes
◍ When performing PDI on chassi dash components, check rear and
side view - Mirrors
◍ When performing PDI on chassi dash components, check - Backup
monitor
◍ As a typical part of PDI a technician needs to ensure headlight
functions when - Dim and bright
, ◍ Which is a convenience light - Fog light
◍ What should be warm to be properly checked - Power steering fluid
◍ When inspecting the hydraulic fluid level in the reservoir, clean the
top of the reservoir before removing the cap to - Prevent foreign material
from entering the hydraulic system
◍ For chassi leveling systems, hydraulic fluid should always be checked
when levers and rooms are - Retracted
◍ When interpreting the year of production, an RV tire has a typical life
of - 5-7 years
◍ When verifying the age of a tire "1206" in the lady grouping indicates
the tire was made in the - 12th week of 2006
◍ When inspecting tires on a towable RV, inspect lug nuts for proper -
Torque
◍ When verifying the installation of pin box couplers on a 5th wheel
hitch, the hitch should be ________ the frame - Square with
TEST 2026 QUESTIONS AND SOLUTIONS
100% CORRECT
◍ When inspecting the parking brake, make sure there is no ______
creep - Forward
◍ A technician is testing a motorized RV. The first step enacted is
ensuring that the seat moves up, down, forward, and back. Identify the
next main steps for the technician to perform. - Adjust swayback, test
seat heaters, inspect armrest
◍ The engine must run for a few minutes for this to work properly -
Heat and cool modes
◍ When performing PDI on chassi dash components, check rear and
side view - Mirrors
◍ When performing PDI on chassi dash components, check - Backup
monitor
◍ As a typical part of PDI a technician needs to ensure headlight
functions when - Dim and bright
, ◍ Which is a convenience light - Fog light
◍ What should be warm to be properly checked - Power steering fluid
◍ When inspecting the hydraulic fluid level in the reservoir, clean the
top of the reservoir before removing the cap to - Prevent foreign material
from entering the hydraulic system
◍ For chassi leveling systems, hydraulic fluid should always be checked
when levers and rooms are - Retracted
◍ When interpreting the year of production, an RV tire has a typical life
of - 5-7 years
◍ When verifying the age of a tire "1206" in the lady grouping indicates
the tire was made in the - 12th week of 2006
◍ When inspecting tires on a towable RV, inspect lug nuts for proper -
Torque
◍ When verifying the installation of pin box couplers on a 5th wheel
hitch, the hitch should be ________ the frame - Square with
