DASR ACTUAL EXAM WITH VERIFIED QUESTIONS
AND ACCURATE SOLUTIONS\2025-2026\GRADED
A+
Which TCMM CCA accepts ( A ) channels Transmitter
Group power detected RF samples ? -
ANSWERSTransmitter RF Monitor U4A2A4
What are the three variable site parameter configuration
sets in the PSR ? - ANSWERSDefault , Maintenance , On -
Line
What is the only CMS control point not used to verify key
system parameters ? - ANSWERSRadar Control Panel (
RCP )
Which test equipment is used to measure pulse or
modulated power ? - ANSWERSBoonton RF Peak Power
Analyzer
1
,Who will perform system optimization and any
maintenance beyond the on - site technicians training
capacity ? - ANSWERSASR - 11 2nd Level Engineering
Team
What automatically monitors and confirms equipment
integrity during normal operation ? - ANSWERSSCDI
Which technical manual has the operating instructions
for the MSSR Remote Site Monitor ( MRSM ) or Parrot ? -
ANSWERSDual Site Monitor Equipment Manual ( TI
6310.54 )
Which technical manual provides the power - up and
power - down procedures for the ASR - 11 ( DASR ) Radar
-3 Configuration system ? - ANSWERSOperation &
Maintenance Instruction ( TI 6310.64 )
schedule , and maintenance procedures Which technical
manual provides the standard and tolerances , periodic
maintenance required to maintain the MSSR DASR
2
, system ? - ANSWERSFAA Maintenance Handbook ( JO
6310.30b )
What is the power requirement for the MSSR CMS with
Monitor ? - ANSWERS220 VAC 2.5 A ( Nominal ) , 47-63
Hz
What is the power out of the MSSR transmitter through
the SUM channel ? - ANSWERS17.5-31.5 dBW
What is the output power from the Difference channel
during Transmit ? - ANSWERS0
What is the transmit frequency for the MSSR secondary
beacon radars ? - ANSWERS2900 MHz
What is the Intermediate Frequency ( IF ) for the MSSR ?
- ANSWERS60 MHz
What is the operating frequency range of the MSSR Dual
Directional Couplers ? - ANSWERS1010-1110 MHz
3
AND ACCURATE SOLUTIONS\2025-2026\GRADED
A+
Which TCMM CCA accepts ( A ) channels Transmitter
Group power detected RF samples ? -
ANSWERSTransmitter RF Monitor U4A2A4
What are the three variable site parameter configuration
sets in the PSR ? - ANSWERSDefault , Maintenance , On -
Line
What is the only CMS control point not used to verify key
system parameters ? - ANSWERSRadar Control Panel (
RCP )
Which test equipment is used to measure pulse or
modulated power ? - ANSWERSBoonton RF Peak Power
Analyzer
1
,Who will perform system optimization and any
maintenance beyond the on - site technicians training
capacity ? - ANSWERSASR - 11 2nd Level Engineering
Team
What automatically monitors and confirms equipment
integrity during normal operation ? - ANSWERSSCDI
Which technical manual has the operating instructions
for the MSSR Remote Site Monitor ( MRSM ) or Parrot ? -
ANSWERSDual Site Monitor Equipment Manual ( TI
6310.54 )
Which technical manual provides the power - up and
power - down procedures for the ASR - 11 ( DASR ) Radar
-3 Configuration system ? - ANSWERSOperation &
Maintenance Instruction ( TI 6310.64 )
schedule , and maintenance procedures Which technical
manual provides the standard and tolerances , periodic
maintenance required to maintain the MSSR DASR
2
, system ? - ANSWERSFAA Maintenance Handbook ( JO
6310.30b )
What is the power requirement for the MSSR CMS with
Monitor ? - ANSWERS220 VAC 2.5 A ( Nominal ) , 47-63
Hz
What is the power out of the MSSR transmitter through
the SUM channel ? - ANSWERS17.5-31.5 dBW
What is the output power from the Difference channel
during Transmit ? - ANSWERS0
What is the transmit frequency for the MSSR secondary
beacon radars ? - ANSWERS2900 MHz
What is the Intermediate Frequency ( IF ) for the MSSR ?
- ANSWERS60 MHz
What is the operating frequency range of the MSSR Dual
Directional Couplers ? - ANSWERS1010-1110 MHz
3
