TTT1 STUDY GUIDE QUESTIONS AND CORRECT ANSWERS
2025/2026 (VERIFIED ANSWERS) ALREADY GRADED A+ /
NEWEST EXAM!!!
What is the heel block used for? - ANSWERS-To change the direction of
the load, jump or tag line from horizontal to vertical
When shall a hoist be inspected before use? - ANSWERS-Daily
An overhaul ball provided what function in the operations? - ANSWERS-
Provided weight allowing the load line to return to the ground?
What is a crown block? - ANSWERS-An upper sheave assembly on top of
the structure
What motion indicates retract the boom? - ANSWERS-Fists made and
thumbs touching
For power lines rated 50 kV, the minimum clearance between the lines and
any part of the crane or load shall be? - ANSWERS-10 feet
What motion indicates easing the crane load? - ANSWERS-Point into the
air and spin finger
An operator must take a stop signal from anyone during the operations? T
or F? - ANSWERS-True
, The basket slings on a pole preform what function? - ANSWERS-Support
all the combined weight
How often should gin poles have a documented job inspection -
ANSWERS-Before each job?
The three main components that make up a fall arrest system? -
ANSWERS-Anchorage, full body harness, connectors
When using a fall restraint system, what is the minimum anchorage
allowed? - ANSWERS-1000lbs
A hoist should be designed to withstand a minimum of, the maximum
intended line pull? - ANSWERS-2 times
What are some of the working parts of a hoist? - ANSWERS-Hydraulic
pump, motor and control levers
In a high vehicle traffic area where work is taking place, the following
should occur? - ANSWERS-Use an indicated signal person with a high Vis
vest
If the wire rope load line on a base mounted hoist has a breaking strength
of 21,500 lbs. what is the actual working load limit when lifting personnel? -
ANSWERS-4300, divide by 5
2025/2026 (VERIFIED ANSWERS) ALREADY GRADED A+ /
NEWEST EXAM!!!
What is the heel block used for? - ANSWERS-To change the direction of
the load, jump or tag line from horizontal to vertical
When shall a hoist be inspected before use? - ANSWERS-Daily
An overhaul ball provided what function in the operations? - ANSWERS-
Provided weight allowing the load line to return to the ground?
What is a crown block? - ANSWERS-An upper sheave assembly on top of
the structure
What motion indicates retract the boom? - ANSWERS-Fists made and
thumbs touching
For power lines rated 50 kV, the minimum clearance between the lines and
any part of the crane or load shall be? - ANSWERS-10 feet
What motion indicates easing the crane load? - ANSWERS-Point into the
air and spin finger
An operator must take a stop signal from anyone during the operations? T
or F? - ANSWERS-True
, The basket slings on a pole preform what function? - ANSWERS-Support
all the combined weight
How often should gin poles have a documented job inspection -
ANSWERS-Before each job?
The three main components that make up a fall arrest system? -
ANSWERS-Anchorage, full body harness, connectors
When using a fall restraint system, what is the minimum anchorage
allowed? - ANSWERS-1000lbs
A hoist should be designed to withstand a minimum of, the maximum
intended line pull? - ANSWERS-2 times
What are some of the working parts of a hoist? - ANSWERS-Hydraulic
pump, motor and control levers
In a high vehicle traffic area where work is taking place, the following
should occur? - ANSWERS-Use an indicated signal person with a high Vis
vest
If the wire rope load line on a base mounted hoist has a breaking strength
of 21,500 lbs. what is the actual working load limit when lifting personnel? -
ANSWERS-4300, divide by 5
