OSHA 510
Exam
,__ Is The Maximum Voltage Before Guarding Is Required Against Accidental
Contact By Cabinets, Other Forms Of Enclosures, Or By Location In A Room
Or Enclosure Accessible Only To Qualified Persons (Electricians).
50 volts or greater
The Practice Of Connecting Two Metallic Objects To Prevent Static Sparks Is
Called __.
Bonding
Before The Start Of Any Work Covered Under Subpart V - Power
Transmission And Distribution, __
Existing conditions are determined by an inspection or a test
A Material Chute Used During Demolition Operations Must Be Enclosed
When Its Angle Is Equal To Or Greater Than __ From The Horizontal.
45 degrees
__ Is The Trigger Height When The Masonry Walls Must Be Braced?
over 8 feet
Except For Extra-Heavy-Duty Metal Or Plastic Portable Ladders, All
Portable Ladders Must Support __ The Maximum Intended Load.
4 times
, Portable Ladders With Structural Defects Such As, Broken Or Missing Rungs
Or Split Rails Shall Be __ From Service Until Repaired.
removed
Rigging Equipment For Material Handling Shall Be Inspected Prior To __
And As Necessary During Use.
use of each shift
__ Must Have The Authority To Stop And Refuse To Handle Crane Loads
Until A Qualified Person Has Determined That Safety Has Been Assured.
crane operator
During Crane Operations When Signaling Is Required, If The Signals Are
Interrupted The Crane Operator Should __
safely stop operations requiring signals until they are
__ Is Responsible To Train Signal Persons To Meet The 1926.1428 Standard.
the employer
The Material Used In Rollover Protection Structures Must Have The
Capability Of Performing At __ Fahrenheit.
0 degrees
The Operator Training Requirements For Rough-Terrain Industrial Trucks
Used In The Construction Industry Are Covered Under OSHA Standard__
1910.178 powered industrial trucks
Exam
,__ Is The Maximum Voltage Before Guarding Is Required Against Accidental
Contact By Cabinets, Other Forms Of Enclosures, Or By Location In A Room
Or Enclosure Accessible Only To Qualified Persons (Electricians).
50 volts or greater
The Practice Of Connecting Two Metallic Objects To Prevent Static Sparks Is
Called __.
Bonding
Before The Start Of Any Work Covered Under Subpart V - Power
Transmission And Distribution, __
Existing conditions are determined by an inspection or a test
A Material Chute Used During Demolition Operations Must Be Enclosed
When Its Angle Is Equal To Or Greater Than __ From The Horizontal.
45 degrees
__ Is The Trigger Height When The Masonry Walls Must Be Braced?
over 8 feet
Except For Extra-Heavy-Duty Metal Or Plastic Portable Ladders, All
Portable Ladders Must Support __ The Maximum Intended Load.
4 times
, Portable Ladders With Structural Defects Such As, Broken Or Missing Rungs
Or Split Rails Shall Be __ From Service Until Repaired.
removed
Rigging Equipment For Material Handling Shall Be Inspected Prior To __
And As Necessary During Use.
use of each shift
__ Must Have The Authority To Stop And Refuse To Handle Crane Loads
Until A Qualified Person Has Determined That Safety Has Been Assured.
crane operator
During Crane Operations When Signaling Is Required, If The Signals Are
Interrupted The Crane Operator Should __
safely stop operations requiring signals until they are
__ Is Responsible To Train Signal Persons To Meet The 1926.1428 Standard.
the employer
The Material Used In Rollover Protection Structures Must Have The
Capability Of Performing At __ Fahrenheit.
0 degrees
The Operator Training Requirements For Rough-Terrain Industrial Trucks
Used In The Construction Industry Are Covered Under OSHA Standard__
1910.178 powered industrial trucks
