MSSC SAFETY ASSESSMENT Exam Questions AND Correct Answers
1. An_________ customer is a person or organization that receives services or
products in exchange for compensation.
a) Internal
b) External
c) In-house
d) Departmental - ✔✔External
10. _______ is a design methodology that designs features into the product that
makes it cheaper to manufacture, while maintaining its ability to perform its
intended function.
a) Design for Manufacturing and Assembly (DFMA)
b) Design Criteria and Performance (DCP)
c) Design, Manufacture, Deliver (DMD)
d) Design for Production and Performance (DPP) - ✔✔Design for Manufacturing
and Assembly (DFMA)
100. A ________ should be worn to protect the face from splashes or flying
particles.
a) Welding mask
b) Goggles
c) Face shield
d) Safety glasses - ✔✔Face shield
101. Personal protection devices, such as safety glasses and welding helmets,
should be inspected ____________.
,a) For an ASTM rating
b) For EPA compliance
c) To ensure that they are not damaged and have a proper fit
d) Bi-monthly - ✔✔To ensure that they are not damaged and have a proper FIT
102. To protect the eyes from welding flash, welders must use ____________.
a) Safety glasses
b) Welding helmet
c) Hard hat
d) Welding curtain - ✔✔Welding helmet
103. Safety glasses with side shields should be worn with _______ for additional
eye protection.
a) Sunglasses
b) Shaded lens
c) Ear plugs
d) A welding helmet - ✔✔A welding helmet
104. ________ are similar to safety glasses except they provide a tighter fit.
a) Face shields
b) Canal caps
c) Welding masks
d) Goggles - ✔✔Goggles
,105. A certification from a physician is required before ____________.
a) Using air breathing apparatus
b) Working out on a treadmill at the company fitness center
c) Operating a conveyor
d) Working in confined spaces - ✔✔Using air breathing apparatus
106. OSHA has set permissible noise level at __ decibels for an eight-hour
period.
a) 60
b) 40
c) 90
d) 120 - ✔✔90
107. OSHA provides regulations to limit the _____________.
a) Exposure to noise
b) Number of hours an employee can work
c) Speed of machinery in the plant
d) Waste products that can go in a sewer - ✔✔Exposure to noise
108. In areas where noise levels are excessive, ______should be utilized.
a) Robots
b) Safety glasses
c) Hearing protection
d) White noise - ✔✔Hearing protection
, 109. Earplugs should be replaced when they are no longer ________.
a) Covered by the warranty
b) Pliable
c) Rigid
d) Inflexible - ✔✔Pliable
11. to be successful ________must be tied to the company's business plan.
a) Team goals
b) Donations to the community
c) The stock market
d) Cross-Training assignments - ✔✔team goals
110. ___________ are cylindrical pieces of foam stamped from a foam sheet.
a) Disposable polyurethane foam plugs
b) Disposable PVC foam plugs
c) Banded ear plugs
d) Ear muffs - ✔✔Disposable polyurethane foam plugs
111. The first step in inserting a foam earplug is to ____________.
a) Roll and compress the plug between your thumb and forefinger
b) Wet it slightly
c) Press it firmly into the ear canal
1. An_________ customer is a person or organization that receives services or
products in exchange for compensation.
a) Internal
b) External
c) In-house
d) Departmental - ✔✔External
10. _______ is a design methodology that designs features into the product that
makes it cheaper to manufacture, while maintaining its ability to perform its
intended function.
a) Design for Manufacturing and Assembly (DFMA)
b) Design Criteria and Performance (DCP)
c) Design, Manufacture, Deliver (DMD)
d) Design for Production and Performance (DPP) - ✔✔Design for Manufacturing
and Assembly (DFMA)
100. A ________ should be worn to protect the face from splashes or flying
particles.
a) Welding mask
b) Goggles
c) Face shield
d) Safety glasses - ✔✔Face shield
101. Personal protection devices, such as safety glasses and welding helmets,
should be inspected ____________.
,a) For an ASTM rating
b) For EPA compliance
c) To ensure that they are not damaged and have a proper fit
d) Bi-monthly - ✔✔To ensure that they are not damaged and have a proper FIT
102. To protect the eyes from welding flash, welders must use ____________.
a) Safety glasses
b) Welding helmet
c) Hard hat
d) Welding curtain - ✔✔Welding helmet
103. Safety glasses with side shields should be worn with _______ for additional
eye protection.
a) Sunglasses
b) Shaded lens
c) Ear plugs
d) A welding helmet - ✔✔A welding helmet
104. ________ are similar to safety glasses except they provide a tighter fit.
a) Face shields
b) Canal caps
c) Welding masks
d) Goggles - ✔✔Goggles
,105. A certification from a physician is required before ____________.
a) Using air breathing apparatus
b) Working out on a treadmill at the company fitness center
c) Operating a conveyor
d) Working in confined spaces - ✔✔Using air breathing apparatus
106. OSHA has set permissible noise level at __ decibels for an eight-hour
period.
a) 60
b) 40
c) 90
d) 120 - ✔✔90
107. OSHA provides regulations to limit the _____________.
a) Exposure to noise
b) Number of hours an employee can work
c) Speed of machinery in the plant
d) Waste products that can go in a sewer - ✔✔Exposure to noise
108. In areas where noise levels are excessive, ______should be utilized.
a) Robots
b) Safety glasses
c) Hearing protection
d) White noise - ✔✔Hearing protection
, 109. Earplugs should be replaced when they are no longer ________.
a) Covered by the warranty
b) Pliable
c) Rigid
d) Inflexible - ✔✔Pliable
11. to be successful ________must be tied to the company's business plan.
a) Team goals
b) Donations to the community
c) The stock market
d) Cross-Training assignments - ✔✔team goals
110. ___________ are cylindrical pieces of foam stamped from a foam sheet.
a) Disposable polyurethane foam plugs
b) Disposable PVC foam plugs
c) Banded ear plugs
d) Ear muffs - ✔✔Disposable polyurethane foam plugs
111. The first step in inserting a foam earplug is to ____________.
a) Roll and compress the plug between your thumb and forefinger
b) Wet it slightly
c) Press it firmly into the ear canal
