CM final Questions with Detailed Verified
Answers
The LEED system deals with:
Select one:
a. Building construction types in the IBC code
b. Sustainability in design and construction
c. Standard procedures used in developing soils reports.
d. De-watering procedures used for deep foundations
e. Building use groups in the IBC code Ans: b. Sustainability in design and construction
Post-tensioning a concrete element (a beam, girder, or slab) helps the concrete
element to:
Select one:
a. Better resist the rigors of freezing/thawing when exposed to the weather
b. Achieve a longer span than would otherwise be possible
c. Help reduce corrosion in the reinforcing steel.
d. Be put into service without using supplementary cementitious materials Ans: b.
Achieve a longer span than would otherwise be possible
Types of concrete elements that must be cast on site are:
,Select one:
a. Caissons and Pile caps
b. Footings
c. Slab-on-grade
d. all of the above Ans: d. all of the above
What are the major types of precast concrete slab elements?
Select one:
a. Solid flat
b. Hollow core
c. Double tee
d. All of above Ans: d. All of above
What can be precast?
Select one:
a. Footings
b. Beams
© Get it right 2025 Getaway - Stuvia US All rights reserved
,c. Slab Toppings
d. Pile Caps Ans: b. Beams
Manufactured by vibrating a stiff concrete mixture into metal molds and cured at an
accelerated rate by subjecting them to steam:
Select one:
a. Mortar
b. Stone
c. Brick
d. CMU Ans: d. CMU
A ------------------ is a vertical layer of masonry unit, one unit thick.
a. Rowlock
b. Brick
c. Wythe
d. Header Ans: c. Wythe
What are the 3 ways in which steel members are joined:
Select one:
© Get it right 2025 Getaway - Stuvia US All rights reserved
, a. bolted, welded and shimmed tied, wired and bolted
b. welded, bolted and rivet
c. rivet, glued and drilled Ans: b. welded, bolted and rivet
Low slope roof components consist of
Select one:
a. roof membrane, flashing and channels
b. thermal insulation, vapor retarder and water
c. roof ballast, vapor retarder and thermal insulation
d. none of these answers are correct. Ans: c. roof ballast, vapor retarder and thermal
insulation
Lag screws are inserted with:
Select one:
a. A screwdriver
b. A pneumatic gun
c. A wrench
d. A hammer Ans: b. A pneumatic gun
© Get it right 2025 Getaway - Stuvia US All rights reserved
Answers
The LEED system deals with:
Select one:
a. Building construction types in the IBC code
b. Sustainability in design and construction
c. Standard procedures used in developing soils reports.
d. De-watering procedures used for deep foundations
e. Building use groups in the IBC code Ans: b. Sustainability in design and construction
Post-tensioning a concrete element (a beam, girder, or slab) helps the concrete
element to:
Select one:
a. Better resist the rigors of freezing/thawing when exposed to the weather
b. Achieve a longer span than would otherwise be possible
c. Help reduce corrosion in the reinforcing steel.
d. Be put into service without using supplementary cementitious materials Ans: b.
Achieve a longer span than would otherwise be possible
Types of concrete elements that must be cast on site are:
,Select one:
a. Caissons and Pile caps
b. Footings
c. Slab-on-grade
d. all of the above Ans: d. all of the above
What are the major types of precast concrete slab elements?
Select one:
a. Solid flat
b. Hollow core
c. Double tee
d. All of above Ans: d. All of above
What can be precast?
Select one:
a. Footings
b. Beams
© Get it right 2025 Getaway - Stuvia US All rights reserved
,c. Slab Toppings
d. Pile Caps Ans: b. Beams
Manufactured by vibrating a stiff concrete mixture into metal molds and cured at an
accelerated rate by subjecting them to steam:
Select one:
a. Mortar
b. Stone
c. Brick
d. CMU Ans: d. CMU
A ------------------ is a vertical layer of masonry unit, one unit thick.
a. Rowlock
b. Brick
c. Wythe
d. Header Ans: c. Wythe
What are the 3 ways in which steel members are joined:
Select one:
© Get it right 2025 Getaway - Stuvia US All rights reserved
, a. bolted, welded and shimmed tied, wired and bolted
b. welded, bolted and rivet
c. rivet, glued and drilled Ans: b. welded, bolted and rivet
Low slope roof components consist of
Select one:
a. roof membrane, flashing and channels
b. thermal insulation, vapor retarder and water
c. roof ballast, vapor retarder and thermal insulation
d. none of these answers are correct. Ans: c. roof ballast, vapor retarder and thermal
insulation
Lag screws are inserted with:
Select one:
a. A screwdriver
b. A pneumatic gun
c. A wrench
d. A hammer Ans: b. A pneumatic gun
© Get it right 2025 Getaway - Stuvia US All rights reserved
