CM 1112 Final Questions with Detailed Verified
Answers
Constructing and operating buildings accounts for all of the energy consumption. Ans:
False
Fine aggregate is also known as gravel. Ans: False
Dead loads are permanent and live load change with time. Ans: True
Control joints should be at least ¼ of the slab depth. Ans: True
Form ties can be made from steel rods, straps, wire, fiberglass, or other plastics. Ans:
True
Form ties can be made from steel rods, straps, wire, fiberglass, or other plastics. Ans:
True
Precast wall panels cannot be solid. Ans: False
Sustainable buildings discourage the collaborative processes. Ans: False
Building codes regulate life safety and health. Ans: True
Foundations must transmit building loads to the rock or soil on which the building
rests. Ans: True
Portland cement is the binding agent in concrete. Ans: True
Slab reinforcing and it's bars are placed on the bottom portion of the slab. Ans: False
High strength concrete is between 6000 psi and 20000 psi. Ans: True
, Clays are very small particles, with larger surface area. Ans: True
owner hires single design and construction entity. Ans: design/build
method combines owner, design, and construction teams into one legal entity. Ans:
single purpose entity
provides financing as well as construction services. Ans: turnkey
owner hires design team and construction team separately. Ans: design/bid/build
owner hires independent construction company to oversee design and construction
services. Ans: construction management
molds that hold the concrete and are returned to a lab for evaluation. Ans: test
cylinders
separation of the large aggregates from the finer portions of the mix. Ans: segregation
a rough measure of the workability of wet concrete as it arrives on site. Ans: slump
test
eliminates voids and air pockets within the concrete. Ans: consolidation
satisfies more stringent structural requirements. Ans: high strength concrete
made with conventional ingredients. Ans: normal strength concrete
concrete hardens through chemical bonding of water and cement. Ans: curing
© Get it right 2025 Getaway - Stuvia US All rights reserved
Answers
Constructing and operating buildings accounts for all of the energy consumption. Ans:
False
Fine aggregate is also known as gravel. Ans: False
Dead loads are permanent and live load change with time. Ans: True
Control joints should be at least ¼ of the slab depth. Ans: True
Form ties can be made from steel rods, straps, wire, fiberglass, or other plastics. Ans:
True
Form ties can be made from steel rods, straps, wire, fiberglass, or other plastics. Ans:
True
Precast wall panels cannot be solid. Ans: False
Sustainable buildings discourage the collaborative processes. Ans: False
Building codes regulate life safety and health. Ans: True
Foundations must transmit building loads to the rock or soil on which the building
rests. Ans: True
Portland cement is the binding agent in concrete. Ans: True
Slab reinforcing and it's bars are placed on the bottom portion of the slab. Ans: False
High strength concrete is between 6000 psi and 20000 psi. Ans: True
, Clays are very small particles, with larger surface area. Ans: True
owner hires single design and construction entity. Ans: design/build
method combines owner, design, and construction teams into one legal entity. Ans:
single purpose entity
provides financing as well as construction services. Ans: turnkey
owner hires design team and construction team separately. Ans: design/bid/build
owner hires independent construction company to oversee design and construction
services. Ans: construction management
molds that hold the concrete and are returned to a lab for evaluation. Ans: test
cylinders
separation of the large aggregates from the finer portions of the mix. Ans: segregation
a rough measure of the workability of wet concrete as it arrives on site. Ans: slump
test
eliminates voids and air pockets within the concrete. Ans: consolidation
satisfies more stringent structural requirements. Ans: high strength concrete
made with conventional ingredients. Ans: normal strength concrete
concrete hardens through chemical bonding of water and cement. Ans: curing
© Get it right 2025 Getaway - Stuvia US All rights reserved
