ICC General Requirements\\\\“ICC General
Requirements Exam Prep 2025 – Comprehensive Guide
to Pass Easily 2025
Periodic special inspection requires inspection of _____ percent of all assemblies.
Rate determined by the Registered Design Professional (RDP)
Special inspection is the inspection of materials and workmanship that ensures critical _____ design
features are incorporated into the construction of a building.
Structural , Fire , Life Safety
A statement of special inspections must include all of the following:
- type and extent of each special inspection
- systems requiring special inspection
- identification of the duration of the special inspection
- materials , components , and work required to have special inspections or tests
- type and extent of each test
Continuous special inspection must occur:
During construction of the components listed in the statement
A statement of the special inspections is required for which of the following materials?
Anchors installed in hardened concrete , engineered masonry , welding
According to the IBC , when must the statement of special inspections be submitted?
At the same time as the construction documents
A final report on special inspections is submitted to the building department _____________.
At a time agreed upon prior to the start of work
Who creates the statement of special inspections?
Registered Design Professional (RDP)
The statement of special inspections lists any components or systems requiring special inspection.
Which of the following situations does not require special inspection.
The contractor is concerned about a new product's installation
Each special inspection listed on the statement must identify whether it is ______ special inspection.
, Periodic or continuous
For seismic resistance , which of the following is required to be identified in the statement of special
inspections?
Designated seismic systems
An example of a special case where the building official might require a special inspection includes all of
the following:
- unusual design applications of materials
- materials required to be installed with additional manufacturer's instructions containing a requirement
for special inspection
- alternative construction materials
Special inspection is inspection of construction requiring h expertise of a(n) ____ to ensure compliance
with the IBC and the approved construction documents.
Approved special inspector
_____ Special inspection is inspection where the inspector is intermittently present where the work to
be inspected has been or is being preformed
Periodic
In ____ special inspection, the special inspector is required to be present continuously when and where
the work to be inspected being preformed.
Continuous
A statement of special inspections is required for materials and construction listed in Section 1705 of the
IBC. As an exception, portions of structures designed and constructed in accordance with _____ do not
require special inspection.
Sections 2211.1.2 and 2308
Where special inspections or tests are required by section 1705, the ____ shall prepare a statement of
special inspections in accordance with Section 1704.3.1
Engineer or architect
_____ shall keep records of special inspections and tests.
Approved special inspection agencies
An approved agency submits reports of special inspections and tests to the ______. Reports shall
indicate that work inspected or tested was or was not completed in conformance to approved
construction documents.
Registered design professional and building official
Discrepancies shall be brought to the immediate attention of the _______ for correction.
Requirements Exam Prep 2025 – Comprehensive Guide
to Pass Easily 2025
Periodic special inspection requires inspection of _____ percent of all assemblies.
Rate determined by the Registered Design Professional (RDP)
Special inspection is the inspection of materials and workmanship that ensures critical _____ design
features are incorporated into the construction of a building.
Structural , Fire , Life Safety
A statement of special inspections must include all of the following:
- type and extent of each special inspection
- systems requiring special inspection
- identification of the duration of the special inspection
- materials , components , and work required to have special inspections or tests
- type and extent of each test
Continuous special inspection must occur:
During construction of the components listed in the statement
A statement of the special inspections is required for which of the following materials?
Anchors installed in hardened concrete , engineered masonry , welding
According to the IBC , when must the statement of special inspections be submitted?
At the same time as the construction documents
A final report on special inspections is submitted to the building department _____________.
At a time agreed upon prior to the start of work
Who creates the statement of special inspections?
Registered Design Professional (RDP)
The statement of special inspections lists any components or systems requiring special inspection.
Which of the following situations does not require special inspection.
The contractor is concerned about a new product's installation
Each special inspection listed on the statement must identify whether it is ______ special inspection.
, Periodic or continuous
For seismic resistance , which of the following is required to be identified in the statement of special
inspections?
Designated seismic systems
An example of a special case where the building official might require a special inspection includes all of
the following:
- unusual design applications of materials
- materials required to be installed with additional manufacturer's instructions containing a requirement
for special inspection
- alternative construction materials
Special inspection is inspection of construction requiring h expertise of a(n) ____ to ensure compliance
with the IBC and the approved construction documents.
Approved special inspector
_____ Special inspection is inspection where the inspector is intermittently present where the work to
be inspected has been or is being preformed
Periodic
In ____ special inspection, the special inspector is required to be present continuously when and where
the work to be inspected being preformed.
Continuous
A statement of special inspections is required for materials and construction listed in Section 1705 of the
IBC. As an exception, portions of structures designed and constructed in accordance with _____ do not
require special inspection.
Sections 2211.1.2 and 2308
Where special inspections or tests are required by section 1705, the ____ shall prepare a statement of
special inspections in accordance with Section 1704.3.1
Engineer or architect
_____ shall keep records of special inspections and tests.
Approved special inspection agencies
An approved agency submits reports of special inspections and tests to the ______. Reports shall
indicate that work inspected or tested was or was not completed in conformance to approved
construction documents.
Registered design professional and building official
Discrepancies shall be brought to the immediate attention of the _______ for correction.
