MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
1. 1. A means of administering drugs as formulated preparations is called:
a. pharmaceutical
b. drug delivery system
c. dosage forms
d. any of the above: D
2. 2. A manufacturer who produces the products of a company without manu-
facturing facilities is a/ an:
a. ethical manufacturer
b. proprietary manufacturer
c. biological manufacturer
d. toll manufacturer: D
3. 3. Primary package system as differentiated from secondary package sys-
tems:
a. are in direct contact with the product
b. have a direct effect on product shelf life
c. AOTA
d. None: C
4. The only true tamper resistant packaging:
a. aerosol containers
b. sealed tubes
c. breakable caps
d. shrink seals: A
5. Purified water that is free from pyrogen
a. purified water
b. water for injection
c. Any of the choices
d. NOTA: B
6. 6. Viscosity enhancers are added to liquid preparations to:
a. improve pourability of products from container
b. improve palatability
c. both
d. none: C
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
7. 7. The most inert grade of stainless steel used for high grade products
a. SS 304
b. SS 316
c. SS 3004
d. SS 3016: B
8. 8. Filtration system which is recommended for handling large quantities is
a. gravimetric filtration c. pressure
b. vacuum d. cartridge filtration: C
9. 9. Filling method which is advisable for highly viscous products
a. gravimetric filling
b. volumetric filling
c. any of the above
d. none: A
10. 10. The advantages of emulsion over other dosage forms include:
a. increased therapeutic effects
b. increased spreading ability
c. ability to mask unpleasant odors
d. AOTA: D
11. 11. Aggregates of powders which adhere or bond to each other to form
larger particles
a. powders
b. microcapsules
c. pellets
d. granules: D
12. 12. Storage conditions for capsules
a. 35-50% RH
b. 21-25ºC
c. AOTA
d. NOTA: C
13. 13. Substance that "glue" powder together causing them to form granules
a. diluent
b. binder
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
c. lubricant
d. disintegrant: B
14. 14. An agent that acts between surfaces in relative motion to prevent friction
and wear
a. diluent
b. binder
c. lubricant
d. disintegrant: C
15. 15. In film coating, when additives migrate to the surface, the problem is
called:
a. blistering
b. wrinkling
c. sweating
d. bloom: C
16. 16. An anteroom which separates the sterile from non sterile is a/an:
a. LAF
b. airlock
c. HEPA
d. AOTA: B
17. 17. Area with no more than 100 particles of 0.5 micron size per cubic foot of
environment:
a. Class 0.5
b. Class 500
c. Class 100
d. Class 1000: C
18. 18. A very simple, sensitive and fast test for pyrogens using the amoebocyte
of the horse shoe crab.
a. Pyrogen Test
b. LAL Test
c. Rabbit Test
d. Crab Test: B
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
19. 19. Ampules are sealed by:
a. Pull sealing
b. Tip sealing
c. any of the above
d. NOTA: C
20. 20. The period in which the product remain acceptable for use:
a. Stability
b. Shelf life
c. Accelerated Stability Studies
d. any of the above: B
21. 21. Flow property of liquid is related to:
a. Viscosity
b. Volatility
c. Optical Property
d. Miscibility: A
22. 22. Solubility may be enhanced through the use of:
a. Application of heat
b. Agitation
c. Reduction of particle size
d. any of the above: D
23. 23. Dispensing equipment in the name of suspension includes:
a. Blenders
b. Impellers
c. Colloid mill
d. all of the above: D
24. 24. A suspension may be stabilized through the use of:
a. Suspending agents
b. Hydrocolloids
c. Viscosity enhancing agents
d. AOTA: D
25. 25. Suspensions are evaluated by:
a. Sedimentation
Study online at https://quizlet.com/_hwxn3j
1. 1. A means of administering drugs as formulated preparations is called:
a. pharmaceutical
b. drug delivery system
c. dosage forms
d. any of the above: D
2. 2. A manufacturer who produces the products of a company without manu-
facturing facilities is a/ an:
a. ethical manufacturer
b. proprietary manufacturer
c. biological manufacturer
d. toll manufacturer: D
3. 3. Primary package system as differentiated from secondary package sys-
tems:
a. are in direct contact with the product
b. have a direct effect on product shelf life
c. AOTA
d. None: C
4. The only true tamper resistant packaging:
a. aerosol containers
b. sealed tubes
c. breakable caps
d. shrink seals: A
5. Purified water that is free from pyrogen
a. purified water
b. water for injection
c. Any of the choices
d. NOTA: B
6. 6. Viscosity enhancers are added to liquid preparations to:
a. improve pourability of products from container
b. improve palatability
c. both
d. none: C
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
7. 7. The most inert grade of stainless steel used for high grade products
a. SS 304
b. SS 316
c. SS 3004
d. SS 3016: B
8. 8. Filtration system which is recommended for handling large quantities is
a. gravimetric filtration c. pressure
b. vacuum d. cartridge filtration: C
9. 9. Filling method which is advisable for highly viscous products
a. gravimetric filling
b. volumetric filling
c. any of the above
d. none: A
10. 10. The advantages of emulsion over other dosage forms include:
a. increased therapeutic effects
b. increased spreading ability
c. ability to mask unpleasant odors
d. AOTA: D
11. 11. Aggregates of powders which adhere or bond to each other to form
larger particles
a. powders
b. microcapsules
c. pellets
d. granules: D
12. 12. Storage conditions for capsules
a. 35-50% RH
b. 21-25ºC
c. AOTA
d. NOTA: C
13. 13. Substance that "glue" powder together causing them to form granules
a. diluent
b. binder
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
c. lubricant
d. disintegrant: B
14. 14. An agent that acts between surfaces in relative motion to prevent friction
and wear
a. diluent
b. binder
c. lubricant
d. disintegrant: C
15. 15. In film coating, when additives migrate to the surface, the problem is
called:
a. blistering
b. wrinkling
c. sweating
d. bloom: C
16. 16. An anteroom which separates the sterile from non sterile is a/an:
a. LAF
b. airlock
c. HEPA
d. AOTA: B
17. 17. Area with no more than 100 particles of 0.5 micron size per cubic foot of
environment:
a. Class 0.5
b. Class 500
c. Class 100
d. Class 1000: C
18. 18. A very simple, sensitive and fast test for pyrogens using the amoebocyte
of the horse shoe crab.
a. Pyrogen Test
b. LAL Test
c. Rabbit Test
d. Crab Test: B
, MANUFACTURING PHARMACY GREEN PACOP
Study online at https://quizlet.com/_hwxn3j
19. 19. Ampules are sealed by:
a. Pull sealing
b. Tip sealing
c. any of the above
d. NOTA: C
20. 20. The period in which the product remain acceptable for use:
a. Stability
b. Shelf life
c. Accelerated Stability Studies
d. any of the above: B
21. 21. Flow property of liquid is related to:
a. Viscosity
b. Volatility
c. Optical Property
d. Miscibility: A
22. 22. Solubility may be enhanced through the use of:
a. Application of heat
b. Agitation
c. Reduction of particle size
d. any of the above: D
23. 23. Dispensing equipment in the name of suspension includes:
a. Blenders
b. Impellers
c. Colloid mill
d. all of the above: D
24. 24. A suspension may be stabilized through the use of:
a. Suspending agents
b. Hydrocolloids
c. Viscosity enhancing agents
d. AOTA: D
25. 25. Suspensions are evaluated by:
a. Sedimentation
