SOLUTIONS 2025.
1 of 276
Term
When a patient has normal pure tone thresholds of 0 dB HL across
frequencies, it is difficult to accurately measure :
Give this one a try later!
SAT Speech Awareness
two weeks after delivery
Threshold
a HL dial or an attentuator dial keeping it clean and free of wax
, Don't know?
2 of 276
Term
A BTE instrument, properly attached
Give this one a try later!
Intolerance for loud sounds one instrument to another
differs at each frequency fits the contour of the ear
Don't know?
3 of 276
Term
When a hearing aid sounds weak, hollow, distorted, or intermittent,
the first check is:
Give this one a try later!
2,000 - 5,000hz nasopharynx
, a weak battery turning on the instrument telecoil
Don't know?
4 of 276
Term
With SIE-S hearing aids:
Give this one a try later!
Are medically correctable, display a
the way they hear today
breakdown or obstruction in middle
ear and display good discrimination
the same dynamic range as The only signal is from the
normal ears hearing aid and phrase effects
from a vent are not an issue.
Don't know?
5 of 276
Term
In bone conduction testing, the receiver should be:
Give this one a try later!
, The probe should be within 5mm of placed at the most sensitive
the eardrum to avoid standing spot on the mastoid of the test
waves. ear.
measuring a specific frequency
the difference in dB between
without involvement of other
the signal and the noise in the
frequencies
system
Don't know?
6 of 276
Term
A mixed loss exhibits:
Give this one a try later!
A common in patients with cochlear
closure of the external ear canal
losses
The clients ears should be carefully SN component and a
examined using an otoscope. conductive component
Don't know?
7 of 276
Term