2A HOISTING ELITE TEST BANK 2025 COMPLETE STUDY PACK
WITH DETAILED SOLUTIONS
✔✔When operating a front end loader on a hill or sloped surface, what's is considered
the most Safe and stable method? - ✔✔Drive up and down slowly with the bucket facing
uphill
✔✔The Operator is asked, to lift a load of unknown weight with an Excavator, wheat
should the operator do? - ✔✔Determine that the weight of the load does not exceed the
machines capacity.
✔✔What slope angle is considered safe for most types of material? - ✔✔34 degrees
✔✔The angle of a slope that material will stay in place, without slipping is called? -
✔✔Angle of repose
✔✔Backfilling of excavations and trenches, can cause stress to the sides of the
excavation? - ✔✔True
✔✔Trenches 4' deep or greater, require an exit be provided, within how many feet of
each worker? - ✔✔25 Feet
✔✔Spoil piles shall be placed a minimum of how far away from the edge of the
Excavation or trench? - ✔✔2 Feet
✔✔The swing gear preforms what action on an excavator? - ✔✔Connects the car body
to the main frame
✔✔When backfilling a trench, the proper method is to place the b=material back in: -
✔✔Lifts
✔✔When preforming maintenance on or leaving the machine un-attended, the safest
Method is to: - ✔✔Lower the bucket to the ground
✔✔When digging a trench or excavation, where should the drive sprocket be? - ✔✔In
the rear
WITH DETAILED SOLUTIONS
✔✔When operating a front end loader on a hill or sloped surface, what's is considered
the most Safe and stable method? - ✔✔Drive up and down slowly with the bucket facing
uphill
✔✔The Operator is asked, to lift a load of unknown weight with an Excavator, wheat
should the operator do? - ✔✔Determine that the weight of the load does not exceed the
machines capacity.
✔✔What slope angle is considered safe for most types of material? - ✔✔34 degrees
✔✔The angle of a slope that material will stay in place, without slipping is called? -
✔✔Angle of repose
✔✔Backfilling of excavations and trenches, can cause stress to the sides of the
excavation? - ✔✔True
✔✔Trenches 4' deep or greater, require an exit be provided, within how many feet of
each worker? - ✔✔25 Feet
✔✔Spoil piles shall be placed a minimum of how far away from the edge of the
Excavation or trench? - ✔✔2 Feet
✔✔The swing gear preforms what action on an excavator? - ✔✔Connects the car body
to the main frame
✔✔When backfilling a trench, the proper method is to place the b=material back in: -
✔✔Lifts
✔✔When preforming maintenance on or leaving the machine un-attended, the safest
Method is to: - ✔✔Lower the bucket to the ground
✔✔When digging a trench or excavation, where should the drive sprocket be? - ✔✔In
the rear