Page 1 of 31
BCSP STSC STUDY GUIDE ALL QUESTIONS AND
CORRECT ANSWERS LATEST UPDATE THIS
YEAR
According to OSHA, which of the following is NOT designated as acceptable fall protection in
the workplace?
roof and silo plugs
Which of the of following is required for electrical safety at a construction site?
All circuits must be tagged or labeled at the disconnect.
Which of the following is NOT an effective control for managing lines, cords, and cables
crossing a walkway at a construction site?
taping lines, cables, and cords together
Who conducts a fitness-for-duty examination?
a medical professional (either a doctor or psychologist)
Hazard control methods include all the following EXCEPT:
hiring employees who are more safety conscious
Which of the following activities is NOT subject to the construction standard, 29 CFR 19267
ALL THE BEST CHAMP!!
1
,Page 2 of 31
training employees on the use of respiratory protection
The time-weighted average noise threshold above which protective measures must be taken
is _______ dB
90
Which of the following is an engineering control that can be implemented to prevent falling
objects from striking workers?
canopies over walkways
Which of the following plans outlines how an employer will respond offensively to an
emergency?
emergency response plan
"Reasonably accessible" as it relates to medical services responding to a construction
worksite where serious injuries (i.e, suffocation, severe bleeding, or other life-threatening
injuries) are likely means that emergency services should be able to respond within _
minutes.
3-4
During an inspection of a powered rotary saw, which of the following should be noted as a
hazard, requiring the tool to be removed from service?
The guard is removed.
ALL THE BEST CHAMP!!
2
,Page 3 of 31
According to the OSHA reporting standard, how soon must a fatal workplace accident be
reported?
within 8 hours of the occurrence
What is the primary hazard associated with using a portable space heater while applying
spray adhesive?
fire caused by the presence of an ignition source near a fuel
What is the primary goal of a job hazard analysis?
to proactively modify a job to prevent injuries
The specific emergency equipment required at a job site will depend on the _______and
the_____
work, environment
Who is responsible for reviewing and authorizing a confined space entry permit, if trained
properly?
an entry supervisor
Which of the following is NOT appropriate to use as a sling for hoisting materials?
leather straps
ALL THE BEST CHAMP!!
3
, Page 4 of 31
What is the most appropriate type of fire extinguisher to have at a construction site based on
fuel types?
ABC
What are the three elements of the fire triangle?
oxygen, heat, fuel
According to OSHA, how long in any one day can a worker be exposed to a noise level of 102
DBA without hearing protection?
90 minutes
Which of the followins is NOT a step when conducting a job hazard analysis?
begin an analysis as soon as an injury occurs
A company is working on replacing sewer lines under the concrete floor of a warehouse.
The safety officer measures the time-weighted average noise level during demolition at 120
dBA. Would earplugs with a noise reduction rating of 30 dBA be appropriate protection?
yes, but only if coupled with other controls
To reduce the struck-by hazard associated with working near heavy equipment, individual
workers should wear the following?
high-visibility clothing
ALL THE BEST CHAMP!!
4
BCSP STSC STUDY GUIDE ALL QUESTIONS AND
CORRECT ANSWERS LATEST UPDATE THIS
YEAR
According to OSHA, which of the following is NOT designated as acceptable fall protection in
the workplace?
roof and silo plugs
Which of the of following is required for electrical safety at a construction site?
All circuits must be tagged or labeled at the disconnect.
Which of the following is NOT an effective control for managing lines, cords, and cables
crossing a walkway at a construction site?
taping lines, cables, and cords together
Who conducts a fitness-for-duty examination?
a medical professional (either a doctor or psychologist)
Hazard control methods include all the following EXCEPT:
hiring employees who are more safety conscious
Which of the following activities is NOT subject to the construction standard, 29 CFR 19267
ALL THE BEST CHAMP!!
1
,Page 2 of 31
training employees on the use of respiratory protection
The time-weighted average noise threshold above which protective measures must be taken
is _______ dB
90
Which of the following is an engineering control that can be implemented to prevent falling
objects from striking workers?
canopies over walkways
Which of the following plans outlines how an employer will respond offensively to an
emergency?
emergency response plan
"Reasonably accessible" as it relates to medical services responding to a construction
worksite where serious injuries (i.e, suffocation, severe bleeding, or other life-threatening
injuries) are likely means that emergency services should be able to respond within _
minutes.
3-4
During an inspection of a powered rotary saw, which of the following should be noted as a
hazard, requiring the tool to be removed from service?
The guard is removed.
ALL THE BEST CHAMP!!
2
,Page 3 of 31
According to the OSHA reporting standard, how soon must a fatal workplace accident be
reported?
within 8 hours of the occurrence
What is the primary hazard associated with using a portable space heater while applying
spray adhesive?
fire caused by the presence of an ignition source near a fuel
What is the primary goal of a job hazard analysis?
to proactively modify a job to prevent injuries
The specific emergency equipment required at a job site will depend on the _______and
the_____
work, environment
Who is responsible for reviewing and authorizing a confined space entry permit, if trained
properly?
an entry supervisor
Which of the following is NOT appropriate to use as a sling for hoisting materials?
leather straps
ALL THE BEST CHAMP!!
3
, Page 4 of 31
What is the most appropriate type of fire extinguisher to have at a construction site based on
fuel types?
ABC
What are the three elements of the fire triangle?
oxygen, heat, fuel
According to OSHA, how long in any one day can a worker be exposed to a noise level of 102
DBA without hearing protection?
90 minutes
Which of the followins is NOT a step when conducting a job hazard analysis?
begin an analysis as soon as an injury occurs
A company is working on replacing sewer lines under the concrete floor of a warehouse.
The safety officer measures the time-weighted average noise level during demolition at 120
dBA. Would earplugs with a noise reduction rating of 30 dBA be appropriate protection?
yes, but only if coupled with other controls
To reduce the struck-by hazard associated with working near heavy equipment, individual
workers should wear the following?
high-visibility clothing
ALL THE BEST CHAMP!!
4
