OSHA BASIC ORIENTATION PLUS TEST 2025/2026 UPDATED ACTUAL EXAM WITH
CORRECT SOLUTIONS/NEWEST UPDATE!!!
Question 1
Under the Stop Work Authority (SWA), which statement is true regarding your rights on a job
site?
A) You can only stop work if a supervisor gives you permission first.
B) You have the right and obligation to stop work if you believe safety is in jeopardy.
C) You should only stop work if you are a designated safety officer.
D) Stop Work Authority only applies to high-voltage electrical tasks.
E) You can be fired for using Stop Work Authority if the job is behind schedule.
Correct Answer: B) True (You have the right and obligation to stop a work activity if you
have reason to believe your own safety or a coworker's safety is in jeopardy or if the work
plan is not clearly established or understood).
Rationale: Stop Work Authority is a safety policy that empowers all employees and
contractors to step in and halt a task that they perceive to be unsafe or unclear, without
fear of retribution.
Question 2
What is required in order for an employee to operate a plant-owned vehicle or mobile equipment
at a facility?
A) Only a valid state driver's license.
B) Only verbal permission from a coworker.
C) The employee must be both qualified and authorized.
D) The employee must own their own personal insurance.
E) No requirements are needed if the vehicle is operated under 5 mph.
Correct Answer: C) qualified only authorized only
Rationale: Operating industrial equipment requires specific technical training
(qualification) and formal permission from the facility management (authorization) to
ensure the operator understands site-specific hazards.
Question 3
Which of the following is a type of work permit you may encounter on an industrial job site?
A) Hot work permits
B) Confined space entry permits
C) Line entry or line breaking permits
D) Lockout/tagout permits
E) All of the above
Correct Answer: E) safe work permits, confined space entry permits, hot work permits, line
entry or line breaking permits, lockout/tagout permits
Rationale: Permits act as a safety checklist and administrative control to ensure that high-
risk activities are reviewed and approved before work begins.
, 2
Question 4
If you are replacing a piece of equipment and the new component is not identical to the one
removed, you must determine if the change was intentional. This process is known as:
A) Equipment Substitution Protocol
B) Management of Change
C) Quality Assurance Review
D) Intentional Replacement Tracking
E) Standard Maintenance Procedure
Correct Answer: B) Management of Change
Rationale: Management of Change (MOC) is a formal process used to ensure that any
modifications to a process, equipment, or materials are evaluated for new safety hazards
before they are implemented.
Question 5
Which type of safety sign is used ONLY where an immediate, life-threatening hazard exists?
A) Caution
B) Notice
C) Warning
D) Danger
E) Safety First
Correct Answer: D) Danger
Rationale: According to OSHA/ANSI standards, "Danger" signs indicate the highest level
of hazard where special precautions are necessary to avoid death or serious injury.
Question 6
Which type of safety sign is used where immediate, but non-life-threatening hazards exist?
A) Danger
B) Warning Sign
C) Caution
D) Information
E) General Safety
Correct Answer: B) Warning Sign
Rationale: A Warning sign indicates a hazardous situation that, if not avoided, could result
in death or serious injury, but the hazard level is just below "Danger."
Question 7
What is the primary purpose of a "Caution" sign?
A) To indicate an immediate life-threatening situation.
B) To provide general information about office hours.
C) To warn against potential hazards or caution against unsafe practices.
D) To mark the location of emergency eye-wash stations.
, 3
E) To indicate that no PPE is required in the area.
Correct Answer: C) Used to warn against potential hazards or to caution against unsafe
practices
Rationale: Caution signs are used to alert workers to potential hazards (like a "Slippery
when wet" sign) or to discourage behaviors that could lead to minor injuries.
Question 8
Which of the following describes a physical device designed to prevent entry into an area where
hazards are present?
A) Barricade
B) Warning tape
C) Barriers
D) Cones
E) Signage
Correct Answer: C) Barriers
Rationale: Barriers are physical obstacles (like fences or walls) that are more permanent or
structural than barricades, specifically designed to physically block entry.
Question 9
What is the definition of a "Barricade" in a safety context?
A) A permanent wall built of concrete.
/B) Obstacles that discourage the passage of persons or vehicles.
C) A sign that tells you to stay away.
D) An underground tunnel.
E) A type of personal protective equipment.
Correct Answer: B) Obstacles that discourage the passage of persons or vehicles
Rationale: Barricades (like cones, saw-horses, or plastic tape) serve as a visual and physical
deterrent to discourage entry into a work zone.
Question 10
When lifting or setting down a heavy load, which part of the body should you bend to prevent
injury?
A) The waist
B) The back
C) The knees
D) The neck
E) The ankles
Correct Answer: C) Knees
Rationale: Bending at the knees allows the strong muscles of the legs to do the work of
lifting, which protects the relatively weak structures of the lower back from strain.
CORRECT SOLUTIONS/NEWEST UPDATE!!!
Question 1
Under the Stop Work Authority (SWA), which statement is true regarding your rights on a job
site?
A) You can only stop work if a supervisor gives you permission first.
B) You have the right and obligation to stop work if you believe safety is in jeopardy.
C) You should only stop work if you are a designated safety officer.
D) Stop Work Authority only applies to high-voltage electrical tasks.
E) You can be fired for using Stop Work Authority if the job is behind schedule.
Correct Answer: B) True (You have the right and obligation to stop a work activity if you
have reason to believe your own safety or a coworker's safety is in jeopardy or if the work
plan is not clearly established or understood).
Rationale: Stop Work Authority is a safety policy that empowers all employees and
contractors to step in and halt a task that they perceive to be unsafe or unclear, without
fear of retribution.
Question 2
What is required in order for an employee to operate a plant-owned vehicle or mobile equipment
at a facility?
A) Only a valid state driver's license.
B) Only verbal permission from a coworker.
C) The employee must be both qualified and authorized.
D) The employee must own their own personal insurance.
E) No requirements are needed if the vehicle is operated under 5 mph.
Correct Answer: C) qualified only authorized only
Rationale: Operating industrial equipment requires specific technical training
(qualification) and formal permission from the facility management (authorization) to
ensure the operator understands site-specific hazards.
Question 3
Which of the following is a type of work permit you may encounter on an industrial job site?
A) Hot work permits
B) Confined space entry permits
C) Line entry or line breaking permits
D) Lockout/tagout permits
E) All of the above
Correct Answer: E) safe work permits, confined space entry permits, hot work permits, line
entry or line breaking permits, lockout/tagout permits
Rationale: Permits act as a safety checklist and administrative control to ensure that high-
risk activities are reviewed and approved before work begins.
, 2
Question 4
If you are replacing a piece of equipment and the new component is not identical to the one
removed, you must determine if the change was intentional. This process is known as:
A) Equipment Substitution Protocol
B) Management of Change
C) Quality Assurance Review
D) Intentional Replacement Tracking
E) Standard Maintenance Procedure
Correct Answer: B) Management of Change
Rationale: Management of Change (MOC) is a formal process used to ensure that any
modifications to a process, equipment, or materials are evaluated for new safety hazards
before they are implemented.
Question 5
Which type of safety sign is used ONLY where an immediate, life-threatening hazard exists?
A) Caution
B) Notice
C) Warning
D) Danger
E) Safety First
Correct Answer: D) Danger
Rationale: According to OSHA/ANSI standards, "Danger" signs indicate the highest level
of hazard where special precautions are necessary to avoid death or serious injury.
Question 6
Which type of safety sign is used where immediate, but non-life-threatening hazards exist?
A) Danger
B) Warning Sign
C) Caution
D) Information
E) General Safety
Correct Answer: B) Warning Sign
Rationale: A Warning sign indicates a hazardous situation that, if not avoided, could result
in death or serious injury, but the hazard level is just below "Danger."
Question 7
What is the primary purpose of a "Caution" sign?
A) To indicate an immediate life-threatening situation.
B) To provide general information about office hours.
C) To warn against potential hazards or caution against unsafe practices.
D) To mark the location of emergency eye-wash stations.
, 3
E) To indicate that no PPE is required in the area.
Correct Answer: C) Used to warn against potential hazards or to caution against unsafe
practices
Rationale: Caution signs are used to alert workers to potential hazards (like a "Slippery
when wet" sign) or to discourage behaviors that could lead to minor injuries.
Question 8
Which of the following describes a physical device designed to prevent entry into an area where
hazards are present?
A) Barricade
B) Warning tape
C) Barriers
D) Cones
E) Signage
Correct Answer: C) Barriers
Rationale: Barriers are physical obstacles (like fences or walls) that are more permanent or
structural than barricades, specifically designed to physically block entry.
Question 9
What is the definition of a "Barricade" in a safety context?
A) A permanent wall built of concrete.
/B) Obstacles that discourage the passage of persons or vehicles.
C) A sign that tells you to stay away.
D) An underground tunnel.
E) A type of personal protective equipment.
Correct Answer: B) Obstacles that discourage the passage of persons or vehicles
Rationale: Barricades (like cones, saw-horses, or plastic tape) serve as a visual and physical
deterrent to discourage entry into a work zone.
Question 10
When lifting or setting down a heavy load, which part of the body should you bend to prevent
injury?
A) The waist
B) The back
C) The knees
D) The neck
E) The ankles
Correct Answer: C) Knees
Rationale: Bending at the knees allows the strong muscles of the legs to do the work of
lifting, which protects the relatively weak structures of the lower back from strain.
