(NFPA) 1006 Exam V1 (Latest
Update ) Questions and
Answers | Grade A | 100% Correct
(Verified Answers)
Question:
What are the two multiple point anchor systems?
Answer:
1. Load sharing
2. Load distributing
Question:
In a load _______ system, the stress on each anchor will only be equal when
pulled directly in the center
Answer:
Load sharing
,Question:
In a load _______ system, the load is nearly equal on all anchors despite side
to side movement
Answer:
Load distributing
Question:
Never use a girth hitch with _______ as an anchor
Answer:
Webbing
Question:
_____ degrees is the critical angle
Answer:
120 degrees
Question:
At 120 degrees, the load on each leg of the system will be approximately ___
percent of the load
Answer:
100 percent
,Question:
__ degrees is the maximum preferred angle and ___ degrees is the critical
angle that is not to be exceeded
Answer:
90 degrees, 120 degrees
Question:
The angle of re-direct should be ___ degrees or later
Answer:
120 degrees
Question:
______ _______ is a force created through mechanical means, which yields an
output force greater than the input force
Answer:
Mechanical advantage
Question:
The _______ system that will perform the task is the best choice
Answer:
Simplest
, Question:
____ ______ systems can be reset and have greater range than than even
numbered systems, best choice for low angle rescue
Answer:
Odd numbered
Question:
_______ haul systems are constructed as a result of a simple system that was
unable to effectively move the load
Answer:
Compound
Question:
The secondary system in a compound system is always the _____ or ______
advantage as the primary, never less than
Answer:
Same or greater